Nikon Coolwalker User manual

En
User's Manual
(En)
Preparation
Basic Operation
Advanced Operation
Technical Notes
Saving Images to a Computer
Organizing Images
Index
Introduction

Trademark Information
• Apple, the Apple logo, Macintosh, Mac OS, Power Macintosh, PowerBook, and Quick Time are
registered trademarks of Apple Computer, Inc.
• Finder, Power Mac, iMac, and iBook are trademarks of Apple Computer, Inc.
• Microsoft and Windows are registered trademarks of Microsoft Corporation.
• Internet is a trademark of Digital Equipment Corporation.
• CompactFlash™ is a trademark of SanDisk Corporation.
• Lexar Media is a trademark of Lexar Media Corporation.
• Adobe and Acrobat are registered trademarks of Adobe Systems Inc.
• Epson and USB Direct Print are trademarks of Seiko Epson Corporation.
• PictBridge is a trademark.
• All other trade names mentioned in this manual or the other documentation provided with
your Nikon product are trademarks of their respective holders.

i
Introduction—For Your Safety
Introduction
Thank you for your purchase of the Nikon COOLWALKER MSV-01 digital photo storage viewer.
This manual has been written to help you get the most out of your Nikon COOLWALKER MSV-01.
Read this manual thoroughly before use, and keep it where all those who use the product will
read it.
To make it easier to find the information you need, the following symbols and conventions are used:
To prevent damage to your Nikon product or injury to yourself or to others, read the following
safety precautions in their entirety before using this equipment. Keep these safety instructions
where all those who use the product will read them.
The consequences that could result from failure to observe the precautions listed in this section
are indicated by the following symbol:
Turn off immediately and unplug in
the event of malfunction
Should you notice excessive heat, smoke or
an unusual smell coming from the
equipment or from the AC adapter, unplug
the AC adapter and remove the battery pack
immediately, taking care to avoid burns.
Continued operation could result in injury or
fire. After removing the battery pack, take
the equipment to a Nikon-authorized service
representative for inspection.
Do not use in the presence of
flammable gas
Do not use electronic equipment in the
presence of flammable gas, as this could
result in explosion or fire.
Do not disassemble or modify
Touching the product's internal parts could
result in injury. In the event of malfunction,
the product should be repaired only by a
qualified technician. Should the product
break open as the result of a fall or other
accident, take the product to a Nikon-
authorized service representative for
inspection after unplugging the AC adapter
and removing the battery pack.
Keep dry
Do not immerse in or expose to water
Continuing to use the product under such
circumstances may cause fire or an electric
shock.
This icon marks cautions,
information that should be read
before use to prevent damage to
your COOLWALKER MSV-01.
This icon marks notes, information
that should be read before using
your COOLWALKER MSV-01.
This icon marks tips, additional
information that may be helpful when
using your COOLWALKER MSV-01.
This icon indicates that more
information is available elsewhere
in this manual.
For Your Safety
This icon marks warnings, information that should be read before using this Nikon
product to prevent possible injury.
Warnings

ii
Introduction—For Your Safety
Do not place the strap around the
neck of an infant or child
Placing the case strap around the neck of an
infant or child could result in strangulation.
Use only the specified batteries and
AC adapter
Using non-specified accessories may cause
fire or an electric shock.
Use appropriate cables
When connecting cables to the input and
output jacks, use only the cables provided or
sold by Nikon for the purpose, to maintain
compliance with product regulations.
Keep out of reach of children
Particular care should be taken to prevent
infants from putting the small parts into
their mouths.
Do not touch the power plugs during
thunderstorms while you are using
the AC adapter
Failure to observe this precaution may lead
to an electric shock.
Keep clear of the device until the
thunderstorm has stopped.
Removing memory cards
Memory cards may become hot during use.
Observe due caution when removing
memory cards from the MSV-01.
CD-ROMs
The CD-ROMs on which the software and
manuals are distributed should not be
played back on audio CD equipment. Playing
CD-ROMs on an audio CD player could cause
hearing loss or damage the equipment.
Avoid contact with liquid crystal
Should the monitor break, care should be
taken to avoid injury due to broken glass
and to prevent liquid crystal from the
monitor touching the skin or entering the
eyes or mouth.
Observe proper precautions when
handling the batteries
The batteries may leak or explode if
improperly handled. Observe the following
precautions when handling the batteries for
use in this product:
• Before replacing the battery pack, turn the
product off and make sure the power-on
lamp has gone out. If you are using an AC
adapter, be sure it is unplugged.
• Use only Rechargeable Lithium-ion Polymer
Battery EN-EL6 (the battery pack) for the
main unit. To charge the battery pack, attach
it to the MSV-01 and connect the supplied
AC adapter. Do not use any other device or
method to charge the battery pack.
• Use only CR2025 Lithium Battery for the
remote control unit.
• When inserting the batteries, do not
attempt to insert them upside down or back-
wards.
• Do not short or disassemble the batteries.
• Do not expose the batteries to flame or to
excessive heat.
• Do not immerse in or expose to water.
• Do not transport or store with metal objects
such as necklaces or hairpins.
• Batteries are prone to leakage when fully
discharged. To avoid damage to the product,
be sure to remove the batteries when no
charge remains.
• Stop charging the battery pack if charging
fails to complete once the specified charging
time has been exceeded.
• Immediately after use, or when the product
is used on battery power for an extended
period, the battery pack may become hot.
Before removing the battery pack, turn the
device off and allow the battery pack to cool.
• Discontinue use immediately should you
notice any change in the batteries, such as
discoloration or deformation.
• Take warning and caution labels on the bat-
teries seriously and follow all safety precau-
tions.
• If leaked fluid from the batteries comes in
contact with the eyes, rinse in clean water
and seek medical attention immediately.
Wash off any leaked fluid from the batteries
that comes into contact with skin or clothing
immediately using clean water.
• Keep out of reach of children. Particular care
should be taken to prevent infants from put-
ting the batteries into their mouths. Should
they swallow, seek medical attention imme-
diately.

iii
Introduction—For Your Safety
Observe proper precautions when
using the AC adapter
Improper use of the AC adapter may result in
electric shock or fire. Observe the following
precautions when using the AC adapter with
this product:
• Do not disassemble, repair or modify the AC
adapter.
In the event of malfunction or should the AC
adapter break open as the result of a fall or
other accident, unplug and take the AC
adapter to a Nikon-authorized service repre-
sentative for inspection.
• Keep dry.
• Do not use in the presence of flammable gas.
• Keep the AC adapter clean of dust. If dust or
grime becomes attached to the metal con-
tacts or body of the power plug, remove it
with a dry cloth. Continuing to use the prod-
uct in these circumstances may cause fire.
• Do not connect or disconnect the AC adapter
power plug with wet hands, as this may
cause an electric shock.

iv
Introduction—Notices
• No part of the manuals included with this product may be reproduced, transmitted, tran-
scribed, stored in a retrieval system, or translated into any language in any form, by any
means, without Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hardware and software described
in these manuals at any time and without prior notice.
• Nikon will not be held liable for any damages resulting from the improper use of this product.
• While every effort has been made to ensure that the information in these manuals is accurate
and complete, we would appreciate it were you to bring any errors or omissions to the atten-
tion of the Nikon representative in your area (address provided separately).
Notice for customers in the U.S.A.
Federal Communications Commission (FCC) Radio Frequency Interference Statement
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radi-
ate radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio com-
munications.
However, there is no guarantee that interfer-
ence will not occur in a particular installation.
If this equipment does cause harmful interfer-
ence to radio or television reception, which can
be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the follow-
ing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equip-
ment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/
television technician for help.
CAUTIONS
Modifications
The FCC requires the user to be notified that
any changes or modifications made to this
device that are not expressly approved by
Nikon Corporation may void the user's author-
ity to operate the equipment.
Interface Cables
Use the interface cables sold or provided by
Nikon for your equipment.
Using other interface cables may exceed the
limits of Class B Part 15 of the FCC rules.
Notice for customers in the State of California
WARNING: Handling the cord on this product
will expose you to lead, a chemical known to
the State of California to cause birth defects or
other reproductive harm.
Wash hands after handling.
Nikon Inc.,
1300 Walt Whitman Road, Melville, New York
11747-3064, U.S.A.
Tel.: [phone]
Notices
MSV-01

v
Introduction—Notices
Notice for customers in Canada
CAUTION
This class B digital apparatus meets all require-
ments of the Canadian Interference Causing
Equipment Regulations.
ATTENTION
Cet appareil numérique de la classe B respecte
toutes les exigences du Règlement sur le maté-
riel brouilleur du Canada.
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that has been digitally copied or reproduced by
means of a scanner, digital camera or other device may be punishable by law.
• Items prohibited by law from being
copied or reproduced
Do not copy or reproduce paper money,
coins, securities, government bonds, or
local government bonds, even if such cop-
ies or reproductions are stamped “Sample.”
The copying or reproduction of paper
money, coins, or securities which are circu-
lated in a foreign country is prohibited.
Unless the prior permission of the govern-
ment has been obtained, the copying or
reproduction of unused postage stamps or
post cards issued by the government is pro-
hibited.
The copying or reproduction of stamps
issued by the government and of certified
documents stipulated by law is prohibited.
• Cautions on certain copies and repro-
ductions
The government has issued cautions on
copies or reproductions of securities issued
by private companies (shares, bills, checks,
gift certificates, etc.), commuter passes, or
coupon tickets, except when a minimum of
necessary copies are to be provided for
business use by a company.
Also, do not copy or reproduce passports
issued by the government, licenses issued
by public agencies and private groups, ID
cards, and tickets, such as passes and meal
coupons.
• Comply with copyright notices
The copying or reproduction of copy-
righted creative works such as books,
music, paintings, woodcut prints, maps,
drawings, movies, and photographs is gov-
erned by national and international copy-
right laws.
Do not use this product for the purpose of
making illegal copies or to infringe copy-
right laws.

vi
Introduction—Notices
A built-in hard disk drive requires careful handling.
This Product is a High-precision Device Containing Internal Hard Disk Drive.
• Read "For Your Safety" and "Caring for Your COOLWALKER MSV-01" before use, and be very careful
when handling the product. Damage to the hard disk drive will not only require high repair
expenses, but can also cause corruption or irreversible loss of the stored data.
• After copying, moving recorded data, or performing any other saving operation, confirm that the
data have been correctly stored in the destination location.
• Ensure that your data is backed up using another recording medium.
Nikon will not be held liable for any damages resulting from deletion, loss and damage of recorded
data.
Use only electronic accessories approved for use with this product
This product is designed to the highest standards and includes complex electronic circuitry. Only the
electronic accessories (including battery pack and AC adapter) certified by Nikon specifically for use with
this Nikon product are engineered and proven to operate within the operational and safety
requirements of this electronic circuitry.
THE USE OF ELECTRONIC ACCESSORIES NOT APPROVED BY NIKON SPECIFICALLY FOR USE WITH THIS
PRODUCT COULD DAMAGE THIS PRODUCT AND MAY VOID YOUR NIKON WARRANTY.
The use of third-party rechargeable Li-ion polymer batteries not approved by Nikon could interfere with
normal operation of this Nikon product or result in the batteries overheating, igniting, rupturing, or
leaking.
For more information about Nikon brand accessories, contact a local authorized Nikon dealer.
Life-Long Learning
As part of Nikon's “Life-Long Learning” commitment to ongoing product support and education,
continually-updated information is available on-line at the following sites:
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe: http://www.europe-nikon.com/support
• For users in Asia, Oceania, the Middle East, and Africa: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently asked
questions (FAQs), and general advice on digital imaging and photography. Additional information may
be available from the Nikon representative in your area. See the URL below for contact information:
http://nikonimaging.com/

vii
Table of Contents
Table of Contents
Introduction i
For Your Safety ................................................................................................................... i
Notices............................................................................................................................... iv
Preparation 1
About the COOLWALKER MSV-01.................................................................................... 1
Check the Package Contents............................................................................................. 2
Parts of the COOLWALKER MSV-01.................................................................................. 3
Main Unit ................................................................................................................. 3
Remote Control Unit ............................................................................................... 5
Navigating the Menus....................................................................................................... 6
Installing and Charging the Battery Pack ........................................................................ 8
Power-ON/OFF ................................................................................................................. 10
Checking the Battery Level ............................................................................................. 10
Setting Display Language ............................................................................................... 11
Basic Operation 12
Inserting a Memory Card ................................................................................................ 12
Copying Images from a Memory Card (Copy CF card ➡HDD)...................................... 13
Viewing Images Stored on the COOLWALKER MSV-01 (Play HDD images)................. 14
Displaying Image Information ........................................................................................ 16
Taking a Closer Look: Playback Zoom ............................................................................ 17
Viewing Images Stored on a Memory Card (Play CF card images) ............................... 17
Button Operations (List View and Image Playback) ...................................................... 19
List View ................................................................................................................. 19
Thumbnail Playback .............................................................................................. 20
Full-Screen Playback .............................................................................................. 21
Movie Playback ...................................................................................................... 22
Organizing Images 23
The EDIT Menu ................................................................................................................ 23
Displaying the EDIT Menu .................................................................................... 23
Delete ..................................................................................................................... 24
Move ...................................................................................................................... 25
Copy ....................................................................................................................... 26
New folder ............................................................................................................. 27
Rename .................................................................................................................. 28
Search ..................................................................................................................... 28
Saving Images to a Computer 30
Driver Software Installation (Windows 98 Second Edition Only) ....................... 30
Connecting the USB Cable .............................................................................................. 32
Copying Images to the Computer .................................................................................. 33
Disconnecting the COOLWALKER MSV-01..................................................................... 34

viii
Table of Contents
Advanced Operation 35
Viewing Pictures on TV ................................................................................................... 35
Copying Images to a Memory Card (Copy HDD ➡CF card) .......................................... 36
Copying All Images in a Selected Folder .............................................................. 36
Copying a Selected Image ..................................................................................... 37
Printing Pictures............................................................................................................... 38
DPOF printset................................................................................................................... 39
Printing Via Direct USB Connection (PictBridge) ........................................................... 42
Connecting to a Printer ......................................................................................... 42
Printing Images Stored on the MSV-01 ................................................................ 43
Printing Images Stored on a Memory Card ......................................................... 45
Printing Images Stored on a Memory Card Using DPOF Settings ...................... 46
Finishing Direct Printing ....................................................................................... 47
Slideshow ......................................................................................................................... 48
Playing All Images in HDD .................................................................................... 48
Playing All Images in a Selected Folder ............................................................... 49
Playing Selected Images ........................................................................................ 49
Operations During the Slideshow ........................................................................ 51
Deselect images ..................................................................................................... 51
Set interval ............................................................................................................. 52
The SET UP Menu............................................................................................................. 53
Brightness .............................................................................................................. 53
Language ............................................................................................................... 54
Auto power off ...................................................................................................... 54
Video mode ........................................................................................................... 54
Format (CF Card/HDD) ........................................................................................... 55
The INFORMATION Screen.............................................................................................. 56
Displaying Memory Information .......................................................................... 56
Technical Notes 57
Optional Accessories........................................................................................................ 57
Caring for Your COOLWALKER MSV-01......................................................................... 58
Error Messages................................................................................................................. 62
Troubleshooting .............................................................................................................. 64
Specifications ................................................................................................................... 65
Index 67

1
Preparation—About the COOLWALKER MSV-01
Preparation
About the COOLWALKER MSV-01
The diagram below illustrates the functions of the MSV-01.
Supported Image Data Formats
• The COOLWALKER MSV-01 supports image data recorded with Nikon digital cameras (DCF format).
• The COOLWALKER MSV-01 supports NEF (Nikon Electronic Image Format) files (RAW files containing
embedded preview images).
• Images taken with cameras from other manufacturers or images edited using a computer may not be
displayed or printed correctly.
• The DPOF printset function supports only JPEG images stored on a CompactFlash™ card.
• The COOLWALKER MSV-01 supports JPEG images for printing via direct USB connection (PictBridge).
• For information on image data supported for displaying, please see "Image Data Supported for Play-
back" ( 15) and "Specifications" ( 65).

2
Preparation—Check the Package Contents
Check the Package Contents
Unpack the COOLWALKER MSV-01 box and check the contents to make sure that you have all the
items listed below.
COOLWALKER MSV-01 AC Adapter DSA-0151F-05
User's Manual (this manual) Remote Control Unit ML-CW1
(CR2025 Lithium Battery included)
Warranty Audio/Video (A/V) cable EG-CW1
Soft Case CF-CW1 USB interface cable UC-E9
MSV-01 Windows®98 SE Driver Installer CD Battery pack case (for use with the removed battery
pack)

3
Preparation—Parts of the COOLWALKER MSV-01
Parts of the COOLWALKER MSV-01
Main Unit
Power-on lamp
( 10)
Power switch
( 10)
HDD Access lamp (flashes
during reading from or
writing to the internal HDD)
LCD Monitor
Right function button
(Right button)
( 6)
Multi selector
( 6)
Memory card slot cover
( 12)
Remote-control sensor
( 6)
Enter button
( 6)
Left function button
(Left button) ( 6)
Memory card slot
( 12)

4
Preparation—Parts of the COOLWALKER MSV-01
Battery Release Button
• Do not press the battery release button when charging the battery pack or when operating the MSV-01.
• Make sure to turn the MSV-01 main unit off and disconnect the AC adapter before removing the bat-
tery pack.
DC-in connector ( 8)
Interface connector cover
USB connector ( 30, 42)
Audio/Video-out connector ( 35)
Battery pack (Rechargeable
Li-ion Polymer Battery EN-EL6)
( 8)
Battery release button
( 8)
Interface connector cover

5
Preparation—Parts of the COOLWALKER MSV-01
Before Using the Remote Control Unit Remove the Insulating Tape.
Remote Control Unit
The remote control unit is shipped with an insulating tape in the battery
holder. Before using the remote control unit remove the insulating tape,
pulling it in the direction indicated by the arrow.
Inserting the CR2025 Lithium Battery
1. Press the latch inwards (➀) and pull out the battery holder (➁) at the base of the remote
control unit in the direction indicated by the arrow in the illustration.
2. Place the battery in the battery holder (➂).
3. Insert the battery holder into the remote control unit. Push it in until the latch locks in place ( ➃ ).
Power OFF button
( 10)
Left function button
(Left button)
( 6)
Multi selector
( 6)
Battery holder (CR2025 lithium battery)
Remote control transmitter
Rotate button
Right function button
(Right button) ( 6)
Enter button
( 6)
Insulating
Tape
M
a
k
e sure t
h
at t
h
e pos
i
t
i
ve
(
+
)
s
id
e o
f
t
h
e
b
attery
is in correct orientation as indicated on the back
of the remote control unit.
➀
➁➂
➃
Battery holder latch

6
Preparation—Navigating the Menus
Navigating the Menus
.
Multi Selector and Enter Button
• Use the multi selector to navigate through menus and make selections. The currently selected
menu item is highlighted.
• Press enter button to execute a highlighted entry.
• on the multi selector may perform the same function as the enter button, i.e. open the sub-
menu screen.
Function Buttons
The Left function button (Left button) and Right function button (Right button) perform the
functions shown at the bottom left and right corners of the monitor, respectively.
Remote Control Unit
• Operate the remote control unit pointing it at the remote-control sensor located beside the
memory card slot of the main unit ( 3).
• The Power OFF button on the remote control unit turns the MSV-01 main unit off.
• The Rotate button rotates, by 90° steps counter-clockwise, the image currently displayed in
full-screen playback mode ( 15).
• All buttons except for the Power OFF and Rotate buttons on the remote control work in the
same way as the equivalent buttons on the MSV-01 main unit.
Main menu
Left function button
(Left button)
Executes commands
displayed bottom-left
Right function button
(Right button)
Executes commands
displayed bottom-right
Enter button
Multi selector
Press to move cursor up.
Press to move cursor down.
Press to display sub-menu.
• In the list view: Press to open a folder ( 19).
• In the list view: Press to close a folder ( 19).
Rotate
button
Remote Control Unit
Power off
button

7
Preparation—Navigating the Menus
The Main Menu
When the MSV-01 is turned on, the monitor briefly displays a welcome screen, and then takes you
to the main menu.
If no memory card is inserted, the Copy CF card ➡HDD, Play CF card images and Copy HDD ➡
CF card options are not available.
The EDIT Menu
To display the EDIT menu ( 23), press EDIT (Right button) when a folder or a file are selected
while using the Play HDD images or Play CF card images options. Use the EDIT menu to
delete, copy, move, rename image files of folders, create new folders or perform search for
images taken within a specified range of dates.
Item Description
Copy CF card ➡HDD Copy all the data recorded within a memory card onto
the MSV-01 hard disk drive.
13
Play HDD images View image files stored on the MSV-01 hard disk drive. 14
Play CF card images View image files stored on a memory card. 17
Copy HDD ➡CF card Copy data stored on the MSV-01 hard disk drive to a
memory card.
36
Print Print to a PictBridge printer connected to the MSV-01 via
direct USB connection, or set DPOF printing for image
files saved on a memory card.
38
Slideshow View image files stored on the MSV-01 hard disk drive in
an automated slideshow.
48
SET UP (Left button) Press SET UP (Left button) to display the SET UP menu
allowing to perform basic settings.
53
INFO. (Right button) Press INFO. (Right button) to display the INFORMATION
screen allowing to confirm the free space on the MSV-01
hard disk drive or memory card.
56
Memory Card Inserted Memory Card not Inserted

8
Preparation—Installing and Charging the Battery Pack
Installing and Charging the Battery Pack
Before Using the COOLWALKER MSV-01 Remove the Insulating Tape.
The battery pack is shipped with an insulating tape
over its terminal.
(1) Remove the battery pack from the MSV-01 main
unit following the instructions provided in the
"Removing the Battery Pack" section below.
(2) Remove the insulating tape from the battery pack.
(3) Reinstall the battery pack following the instruc-
tions provided in the "Installing the Battery Pack"
section below.
1Removing the Battery Pack
Push the battery release button (➀) and slide the bat-
tery pack in the direction of the arrow (➁) to remove
it from the the MSV-01 main unit (➂).
2Installing the Battery Pack
(1) Align the battery pack horizontally with the bot-
tom of the MSV-01 main unit as shown on the
illustration (➃). Make sure that the battery pack
terminals do not extend over the main unit pro-
truding part (➄).
(2) Slide the battery pack in the direction of the
arrow onto the bottom of the MSV-01 main unit
until it locks into position (➅). Make sure that the
battery pack is fully seated as shown on the illus-
tration (➆, ➇).
3Charging the Battery Pack
To charge the battery pack, it must first be installed
on the MSV-01 main unit.
(1) Make sure that the power-on lamp on the MSV-01
main unit is off.
Insulating
tape
Terminals
➂
➁
➀
➃
➄➄
➆ ➅ ➇
Power-on lamp

9
Preparation—Installing and Charging the Battery Pack
Using the COOLWALKER MSV-01 from an AC Power Supply Source
• To use your MSV-01 from an AC power source, connect the AC adapter and turn the power switch on.
• Charging is not performed when the MSV-01 is on with the AC adapter connected.
Removing and Installing the Battery Pack
• Before removing the battery pack make sure that the MSV-01 is turned off and the AC adapter is dis-
connected.
• When removing or attaching the battery pack, always observe the correct procedure described in this
manual to avoid damaging the battery terminals.
• Do not touch the battery pack terminals to avoid damaging them and prevent them from becoming
dirty.
• Do not leave unattended or transport the MSV-01 with the battery pack removed.
• Do not remove the battery pack when using the MSV-01 from an AC power supply source. If you acci-
dentally connect the AC adapter to the MSV-01 with the battery pack removed, the power-on lamp
will light up (orange). Make sure that the MSV-01 is off, disconnect the AC adapter and attach the
battery pack.
The AC Adapter
• Accidental disconnection of the AC adapter while the MSV-01 is turned on may damage the device.
When using the device, be careful not to disconnect the AC adapter.
• Be sure to read and follow the precautions in the "For Your Safety" ( i-iii) section and notes on
using the AC adapter ( 59) in this manual.
The Battery Pack
• When transporting or storing a spare battery pack, place it in the supplied case.
• On handling the battery pack, refer to the Li-ion Polymer Battery EN-EL6 manual. When installing or
removing the battery pack, be sure to read and follow the precautions in the "For Your Safety"
( i-iii) and "Notices" ( iv - vi) sections, as well as notes on using the battery pack in the
"Batteries" ( 60) section in this manual.
(2) Open the interface connector cover, and connect
the supplied AC adapter to DC-in connector (➈).
Plug the AC adapter into an outlet (➉).
(3) Charging will begin immediately.
While the battery is charging, the power-on lamp
flashes in orange. Charging is complete when the
orange power-on lamp stops flashing.
An exhausted battery can be fully charged in
about 4.5 hours.
(4) Remove the AC adapter, while the MSV-01 is still
off.
➈
➉

10
Preparation—Power-ON/OFF
Power-ON/OFF
To power the MSV-01 on, press and hold down the power switch ( 3) for about 2 seconds. The
monitor will turn on showing the welcome screen, then it will switch to the main menu. To turn
the MSV-01 off, press and hold down the power switch for about 2 seconds when the power-on
lamp is on.
The MSV-01 status is shown as follows:
Turning the Power On/Off
• Be sure to turn the MSV-01 off, when:
- inserting or removing a memory card;
- connecting or disconnecting the A/V cable;
- removing the battery pack.
• The MSV-01 will not go off if the power switch is pressed while the copy ( 13, 26, 36), or HDD/
memory card format ( 55) operation is in progress and "
Copying... " or " Formatting... " is
displayed on the monitor.
Auto Power Off
If no operation is performed for one minute (default setting) when running on battery power, the MSV-
01 will turn off automatically.
• This setting can be changed using the Auto power off option in the SET UP menu ( 54).
• The Auto power off function is disabled when the MSV-01 is running on the AC power supply.
Checking the Battery Level
The battery status is displayed at the bottom of the MSV-01 monitor.
During operation, the display may temporarily indicate a lower than the actual remaining battery
charge.
Using the MSV-01 from an AC Power Source
To power the MSV-01 continuously for extended periods, use the DSA-0151F-05 AC adapter. Do not,
under any circumstances, use another make or model of an AC adapter. Failure to observe this
precaution could result in overheating or in damage to the MSV-01.
Power-on Lamp COOLWALKER MSV-01
ON (green) Power ON
OFF Power OFF
Blinking (orange) Charging (OFF)
On (orange) Charging completed (OFF)
Display Description
Battery is fully charged.
Battery power is low. The power may go off dur-
ing operation.
Battery is exhausted. Recharge or use the AC
adapter immediately.
Not displayed The MSV-01 is operating from an AC power
source.
Power switch Power-on lamp
Battery status