Niles CM730Si User manual

CALL 1-800-BUY-HIFI – www.nilesaudio.com
BLENDING HIGH FIDELITY AND ARCHITECTURE®
7" Stereo Input Ceiling Mount Loudspeaker with Pivoting Tweeter
CM730Si
7" STEREO INPUT
CEILING MOUNT LOUDSPEAKER
• 7" Polypropylene Dual Voice Coil Woofer
• Dual 19mm UltraSilk®Tweeters

Loudspeaker Model Works With
Model Stock Number Previous Bracket New Bracket Metal Enclosure Hole Cover
CM730Si FG01304
NILES AUDIO CORPORATION 12331 SW 130 Street, Miami, FL 33186 1-800-BUY-HIFI – www.nilesaudio.com
©2007 Niles Audio Corporation. All Rights Reserved. Niles and the Niles logo are registered trademarks of Niles Audio Corporation. CS0055
P
RODUCT CONSTRUCTION AND ACCESSORIES
7
INCH STEREO INPUT CEILING MOUNT LOUDSPEAKER
7" Stereo Input Loudspeaker
with Pivoting Tweeter
CM730Si
Stock Number
FG01304
Features
■Integrated woofer/baffle design delivers greater low frequency response by employing a
7" woofer where competitive models of the same outer size employ 6 1/2" woofers.
■Polypropylene dual voice coil woofer reproduces left and right channel inputs from a
single speaker.
■Treated urethane surround increases sensitivity and preserves durability
■Dual 19mm pivoting fluid-cooled UltraSilk™tweeters provide wide dispersion for clear and
detailed high frequencies
■Bridge-mounted stereo imaging (Si) tweeter array directs the high-frequency sounds from both
the left and right channels at opposing angles to preserve stereo separation
■Includes flush-mount MicroPerf™aluminum grille for a clean and unobtrusive look.
■Weather resistant construction reduces installation limitations and provides unique solutions in
showers or outdoors under eaves
Specifications
■Frequency Response: 60Hz to 21kHz +/-3dB
■Impedance: 8 ohm nominal; 6 ohm minimum
■Recommended Amplifier Power: 10 to 100 Watts
■Frame Dimensions: 9 1/4 inches
■Hole cutout dimensions: 8 inches
■Depth behind ceiling: 4 3/8 inches
Warranty: Five-year limited
CM700 CE
FG01396
CM6 Series
Bracket Kit
FG00655
CM700 BKT
FG01308
CM700 Hole Cover
FG01309
9-1/4"
Frame Outer
Diameter
8"
Hole
Cutout
4-3/8" Depth
8"
Hole
Cutout
4-11/16" Depth