Nilfisk-Advance SP17-150 User manual

SIDE-WINDINGPOLISHER
REV.00(12-07)
VF72301
PARTSLIST&INSTRUCTION FOR USE
NilfiskMODELSP17-150

DESCRIPTIONPLAN
SafetyPrecautions3
MachineOperation4
MachineMaintenance&Storage4
Parts List5---10
MachineOperation Chinese）11
Wiring Diagram12
2
WHENORDERINGPARTS
*Usethe7,8 or 9digitpart numbers fromthe partnumber”
columnsinthis parts list.
*Specifythemodelandserialnumberofthemachine.
*Usethespacebelowtorecordthemodelandtheserial
Numberforfuturereference.
ModelSerialNo.

SAFETYPRECAUTIONS
Thismachine mustbegrounded!
Groundingprovidesapathofleast
resistanceforelectricalcurrent. to
reducetheriskofelectricalshockshould
themachinemalfunction,themachinehas
aspecialgroundingplug.Do notremove
the ground pinunderanycircumstances.
ThismachineisintendedforCommercial
use.Itisconstructed foruseinanindoor
environmentandisnotintended forany
otheruse.Useonlyrecommended
accessories.
Alloperatorsshall read,understandand
exercisethe followingsafetyprecautions:
1]Donot operate machine:
-Unless trained and authorized.
-Unless you havereadand
understandoperatorsmanual.
-Inflammableorexplosiveareas.
-Withadamaged cord orplug.
-Ifnotinproperoperating condition.
-Inoutdoorareas.
-Instandingwater.
-Withtheuseofextensioncords.
2]Beforeoperating machine:
-Makesureallsafetydevicesarein
placeandoperateproperly.
3]Whenusing machine:
-Donotrunmachine overcord.
-Donotpullmachinebycordorplug.
-Donotpullcordaroundsharpedges
orcorners.
-Donotunplugbypullingonthecord.
-Donotstretchcord.
-Donothandleplugwithwethands.
-Keepcordawayfrom heated
surfaces.
-Reportmachinedamage offaulty
operationimmediately.
4]Before leavingorservicing machine:
-Turnoffmachine.
-Unplugcord from outlet.
5]Whenservicing machine:
-Unplugcord from outlet.
-Usemanufacturersupplied or
approved replacementsparts.

OperationofFloorMachines
*READ OPERATORSMANUAL
THOROUGHLYPRIOR TOOPERATINGOR
SERVICINGTHISMACHINE.
GENERALUSE
1. Removeany obstructionsorother
obstaclesin thearea which istobe
cleaned.
2. Placethehandleintheuprightposition
andtiltmachinebackuntilhandlerests
onthefloor
*Besurethemachineisnotplugged into
anoutlet
3. Attach thepaddriverorbrushtothe
machinebyplacingtheclutch plateover
thegearboxhub andturningthedriver
/brush turn.
4. Placemachinebackintoitsupright
position.
5. Plug powercordintoagroundedoutlet.
* Neveruseanextensioncordin
conjunctionwiththestandardpowercord.
6. Thehandleheightmaybeadjustedby
liftingupthecompressionhandlewhich
islocatedontherightsideofthehandle
tubeabout1footabovefloorlevel.
Releasethecompressionhandleand
adjusthandletosafeoperatingheight,
thenpushbackdownonthe
compressionhandletolockthehandlein
operatingposition.
7. Tostart themachine, press thered
safetybuttononthetopoftheupper
switch housing, andthensqueezeeither
oftheoperatingtriggers. (thesafety
buttonmustbedepressedpriorto
squeezingtheoperatingtriggers.)
8. Whenthemachineisinoperation, both
handsshould beplacedontheswitch
housing(upperhandle).
9. Duringoperation, tomakethemachine
goright, gentlyraisethehandle. To
makethemachinegoleft, gentlylower
thehandle.
10. Tostopthemachineatany time,
simplyreleasetheoperatingtrigger(s)
andthemachinewill stopautomatically.
MAINTENANCE
Tokeepthemachineperformingwell for
many years, pleasefollowthefollowing
maintenanceprocedures.
*Alwaysconfirm thatthemachineis
unpluggedpriortoperformingany
maintenanceorrepairs.
1. Unplug machineassoonasyouare
doneusingit.
2. Tiltmachinebackandremovepaddriver
orbrush.
*Neverstorealowspeed machinewith
thepaddriverorbrushmounted tothe
machine.
3. Cleantheoutsideofthemachinewitha
mild cleaner.
4. Checkpowercordforany damage. If
damageisdetected, replacepowercord
immediately.
5. Lubricatewheelswithawaterresistant
lubricantonceamonth.
6. Checkmachineforlooseormissingnuts
andbolts, andreplaceasnecessary.
7. Ifthemachineisusedinadusty
environment, youmayremovethemotor
coverandblowthemotorcleanwith
compressedair. Thiswill ensureproper
ventilation, andallowthemotortorun
cooler.
STORAGE
1. Unplug machinefrom powersourceand
wrapcordonhandle.
2. Tiltmachinebackandremovepaddriver
orbrush.
3. Storemachinein uprightpositionandin
adryarea.

PARTSLIST
HANDLE GROUPFORSP17-150

DIA
NO PART NUMBER NO REQ'D
1VF72725 FRONTCOVER, GEARSEAT 套座前罩 1
2 GV40229 COVER, GEAR 齿轮端盖 1
3VF47029 GEARSEAT 扁管 套座 1
4VF40125B GEAR 调位齿轮 1
5 GV40227 BIG WASHER, NYLON 尼龙垫片 2
6 GV40228 "O"RING 齿轮“O型密封圈 2
7 GT13019 SCREW, M6 X45 外六角不锈钢螺丝 M6X45 4
8VF72726 REARCOVER, GEARSEAT 套座后罩 1
9VF14087 ST4X35 十字盘头平尾自攻丝 ST4X35 4
10 VF47046 GASKET, HOOK 套座后罩壳密封圈 1
11 VF47045 HOOK, CABLE 提手绕线架 1
12 VF13616 HEXSOCKET, M10 X55 内六角螺丝 M10 X55 1
13 VF47052 INSERT 调位齿杆 1
14 GT13013 NUT, M4 六角螺母 M4 1
15 GV40220B ROD, LEVELING 调节拉杆 1
16 VF47007 SPRING, ROD 拉杆弹簧 1
17 VF47033 RETAINER, SPRING 扁管弹簧座 1
18 VF47008 SEAL, GEARSEAT 防水盖 1
19 VF72724 CORD, HANDLE 电源线 1
20 VF50120 GROMMET, CORD 电源线保护胶圈 1
21 VF72714 HANDLETUBE, ALU 扁主管 1
22 VA13474 SCREW, M5 X16, PH 十字盘头螺钉 M5X16 1
23 VF40994 READMANUAL LABEL 头像贴纸 1
24 VF72721 POWERCORD 电源线 1
25 VV67105 CONNECTOR 连接块 1
26 VF72722 CORD 电线 1
27 VF46708 LEVER, SOLUTION 放水拉把 1
28 VF51141 OUTLET, DRYFOAMGENERATOR 插座 1
29 VV13616 SCREW, M3 X16, PH 十字沉头螺丝 M3 X 16 1
30 VF46715 1
31 VF46717 WASHER 平垫 1
32 VF14244 SCREW, M3 X20, PH 十字盘头螺丝 M3 X 20 1
33 VF46718 SPRING 扭簧 1
34 VF46716 SPACER 台阶轴套 1
35 VF44005 METAL STRAINRELIEF, CORD 线尾套 1
36 VF72703 SWITCHLEVER, LEFT 左拉把 1
37 VF48306 PIN 定位销 4
38 VF72701 REARCOVER 手柄后壳 1
39 GT13058 SCREW, FLAT HEAD, M5*22 十字沉头螺丝 M5*22 2
40 VF72302 SERIAL TAG 连续号贴纸 1
41 GT13035 SCREW, OVAL HEAD, M5*35 十字半沉头螺丝 M5*35 4
42 VF46705 SAFETYLOCK 保险键 1
43 GV40218 SPRING, SAFETYLOCK 保险弹簧 1
44 VV13617 NUT, M3 六角螺母 M3 2
45 VF72704 SWITCH, LEVER, RIGHT 右拉把 1
46 VF20509 SCREW, PANHEAD,M4*8 十字盘头螺钉 M4*8 5
DESCRIPTION
CLICK RINGPLUG, FOAMGENERATOR插座保护钩
HANDLE GROUPFOR SP17-150

DIA
NO PART NUMBER NO REQ'D
DESCRIPTION
HANDLE GROUPFOR SP17-150
47 VF48309 CLAMP BLOCK 线块 1
48 VF99023 SWITCH, 20A 开关 20A/250V 1
49 VF13511 WASHER, EXTERAL TOOTH, 3齿形垫圈 32
50 VF14212 SCREW, M3 X25, PH 十字盘头螺丝 M3 X 25 2
51 VF72713 HOLDER, STEEL BALL 钢球保持架 1
52 VF72723 STEEL BALL ,Φ10 Φ10 钢球 1
53 GT13014 NUT, M4, NYLONINSERT 防松螺母 M4 1
54 VF72707 LEVER, ROD 调位拉把 1
55 GT13017 WASHER, 4,PLAIN 平介子 41
56 VF72710 REINFORCINGPLATE 支撑板 1
57 GT13054 SCREW，BINDHEAD ，M5*12 十字大扁盘头螺钉 M5*12 4
58 GT13022 NUTLOCK M5 防松螺母 M5 1
59 GV40233 PINΦ4圆柱销 1
60 GV40221 SPRING 弹簧 1
61 GV40222-1 CLAP CORD 挂绳夹 1
62 GV40222 ELASTIC CORD 挂绳 1
63 GV40215 CORD WARP 挂绳板 1
64 VF72709 PLATE 垫板 1
65 VF72702 FRONTCOVER 手柄前盖 1
66 GV70043N LOGO 铭牌 1
67 VF47032 CLAMP PLATE,SL TANK 水箱扣 1
68 VV20150 HEXSOCKET,M5 X12 内六角不锈钢螺丝 M5 X 12 2
69 VF13638 SCREW，HEXHEAD ，M5*43 外六角螺丝 M5*43 1
70 VF14112 SCREW，PANHEAD ，M5*38 十字盘头螺钉 M5*38 1
71 VF47034 SPACER,CLAMP PLATE 水箱扣柱 2
72 VV20275 WASHER,PLAIN,3/16 平垫片 3/16 2
73 VF13600 WASHER,PLAIN, 6X 16 X1 不锈钢平介子 6 X 16 X 1 4
74 VF13502 NUT,M6,NYLONINSERT 防松螺母 M6 4
75 VF47031N TANK,SOLUTION 水箱壳体 1
76 VF40142 NUT,M14 螺母 1
77 VF40132 BARB,HOSE,SL 放水阀接头 1
78 VF40139 HOSE,SL 溶液管 1
79 VF41020 "O"RING 密封圈 1
80 VF40131 VALVE BODY 放水阀体 1
81 VF40155 NUT,M5 六角元台螺母 1
82 VF40134 SEAL,GEARSEAT 锥形密封堵 1
83 VF40138 WASHER,PLAIN, 5垫圈 1
84 VF40144 NUT,M5 螺母 2
85 VF40135 SPRING 弹簧 1
86 VF40133 SCREW 放水阀螺堵 1
87 VF40148 LOWERPULLINGROD 拉杆 1
88 VF40137 UPPERPULLINGROD 拉钩 1
89 VF40147 GROMMET,ROD 水箱拉杆密封圈 1
90 VF40156 SEAT,CHAIN 链条座 1
91 VF41021 CHAIN 链条 1
92 MF-EZ-001N SOLUTIONTANK ASSY 水箱组件 1

PARTSLIST
BASE GROUPFORSP17-150

DIA
NO
PART
NUMBER
NO
REQ'D
1VF13498 HEX SOCKET SCREW, M6X 20 六角圆柱头螺丝 M6X20 14
2 VF46104 ALUCOVER, GEAR 铝盖板 1
3VF13490 SCREW, PAN HAND, M4*10 十字盘头螺丝 M4*10 5
4VF46106 COVER, GASKET 防尘端盖 1
5VF14089 SEAL, FB30 X 40 X 7 唇形密封圈 1
6VF14052 RETAININGRING, EXTERNAL,￠30 轴用弹性挡圈 1
7VF46111 WASHER 垫圈 1
8VF14061 BEARING, 6006ZZ 双面防尘盖球轴承 6006ZZ 2
9VF46110 SPACER, BEARING 轴承隔套 1
10 VF14050 RETAININGRING, INTERNAL,￠55 孔用弹性挡圈 1
11 VF46107 CLUTCHPLATE 卡扣座 1
12 VF46114 GASKET 密封圈 1
13 VF46103 PLATE 挡板 1
14 VF46119 GASKET, PLATE 橡胶密封圈 1
15 VF46109 PIN 销轴 6
16 VF46102 GEAR, PLASTIC 塑料齿轮 1
17 VF46108 SEAT, GEAR 齿轮座 1
18 VF14208 HEX SCREW, M6X 12 六角螺丝 M6X12 5
19 VF46105 SHAFT 铜轴 1
20 VF14055 "O"RING, ￠2.65 X ￠44.7 O”型密封圈 1
21 VF72122 TOPCOVER 上盖 1
22 GV70103 BLOCK 堵1
23 VF72121 COVERMOTOR 电机罩 1
24 VA13474 SCREW, M5X 16, PH 十字盘头不锈钢螺丝 M5X16 5
25 GT13054 SCREW, PAN HEND, M5*12 十字盘头螺丝 M5*12 2
26 VV13601 WASHER, LOCK, SST, Φ5不锈钢弹簧垫片 Φ51
27 VV50712 CLAMP, CORD 线夹 1
28 VF46441 ELBOW, HOSE, FOAMING 出泡弯接头 1
29 VF46442 NUT, ELBOW, HOSE 出泡弯头螺母 1
30 VV10114 CLAMP，10-16 喉箍，10-16 4
31 VF82041 ELBOW, HOSEBARB 直角接头 1
32 VF50112 GROMMET 保护胶圈 1
33 VF72126 BRACKET, ELBOW, HOSE 支架 1
34 VF72128 TUBE, FOAMING 出泡管 1
35 VF72129 TUBE, FOAMING 出泡管 1
36 YCQ16000N MOTOR, 220V, 1HP 电机 1
37 GT13080 SCREW, M6X 30, HEX SOCKET 六角螺丝, M6X30 4
38 VF72202 MOUNTINGBASE, SEAT, GEAR 铝套座支座 1
BASEGROUPFORSP17-150
DESCRIPTION

DIA
NO
PART
NUMBER
NO
REQ'D
BASEGROUPFORSP17-150
DESCRIPTION
39 VF13514 WASHER, PLAIN, 8平介子, 8X 16 X1.5 3
40 VF13503 NUT, M8, NYLON INSERT 防松丝母, M8X7.5 3
41 GT13025 SCREW, PAN HEND, M3*12 十字盘头螺丝 , M3*12 2
42 VF72131 TERNIMAL BLOCK 接线柱 1
43 VV13650 SCREW, PAN HAND, M4*10 十字盘头螺丝, M4*10 2
44 VF72125 BRACKET, TERMINAL BLOCK 接线柱支架 1
45 VF72201 FRAME 壳体 1
46 GT13032 WASHER, PLAIN , 6X 16 X 1.5 平介子, 6X 16 X1.5 4
47 VF13502 NUT, LOCK, 6防松丝母, M6 4
48 GV40235 CLAMPBLOCK, AXLE 轮轴固定块 2
49 VV13621 SELF-TAPPINGSCREW, ST5X 20 十字平尾金属自攻丝, ST5X20 2
50 VF13474A WASHER, PLAIN, 5X 16 不锈钢平介子, 5X 16 X1 2
51 VF46118 BUMPER, FRAME 防撞边 1
52 GT13051 HEX SCREW, M6X 30 内六角螺丝( 不锈钢）, M6X30 6
53 GT13027 SCREW, PAN HEAD, M5*45 十字盘头螺丝, M5*45 1
54 VA13476 SCREW, PAN, HEAD, M5*40 十字盘头螺丝, M5*40 2
55 VF14305 SCREW, PAN, HEAD, M5*60 十字盘头螺丝, M5*60 1
56 VF14067 SCREW, M8X25 内六角螺丝, M8X25 2
57 VF46131 IRON BAR 配重块 1
58 VF40152 BARBHOSE 机体水管接头 2
59 VA13490 NUT, M8 皇冠螺母, M8 2
60 VF46120 AXLE, WHEEL 轮轴 1
61 VF13520 RETAININGRING, 12 开口挡圈, 12 2
62 VF50119 WAVINGWASHER, 12 鞍型垫圈 2
63 VF99001 WHEEL, NON-MARKING4" 4"轮子 2
64 VF13666 WASHER,PLAIN, 6X 22X1.5 平介子, 6X 22 X1.5 2
65 VF44012 SCREW, M6X12.7 防松螺钉, M6X12.7 2
66 VF72124 HOLDER（BIG）, CAPACITOR 电容座（大） 1
67 VF14301 SCREW, FLAT HEAD, M4*12 十字沉头螺丝, M4*12 2
68 VF999849 START-UP CAPACITOR(BIG),100UF/300V 起动电容 100UF/300V 1
69 GT13036 SCREW, M8*60 内六角螺丝 M8*60 3
70 VF72123 HOLDER（SMALL）, CAPACITOR 电容座（小） 1
71 VV30138 RUNNINGCAPACITOR, 10UF/500V 运行电容 1
72 VF72130 DECAL 贴纸 1