Nilox NX-HQ-410 User manual

RJ diagram connector
The connector RJ 11 of the printer the pins that feed
the coil are, pin 4 (+ 24v) and pin 2 (Signal opening
drawer 1) for the normal drawers. Drawer layout:
PIN SEÑAL DESCRIPCIÓN
1 GNDsignal -
2 Drawer opening signal 1 Input
3 Signal status (open / closed) Output
4 + 24V -
5 Drawer opening signal 1 Input
6 GND signal -
Dismantle drawer
Remove the compartment for bills and coins. Then
remove the drawer following the lower drawing.
Check that there is nothing inside the drawer or in
the guides that makes it difficult to move the
drawer.
Safety lock
The drawer has a lock with 3 positions to perform 3
different functions:
1. Position (1) closed without electronic opening. In
this position the drawer cannot be opened in
any way since the lock blocks it.
2. Position (2) closed with electronic opening. In
this position, the opening of the drawer can be
controlled electronically.
3. Position (3,4) manual opening with key. Turning
the key to position 3 does nothing but from
position 3 to 4 it opens the drawer. When
releasing the key returns to position 2.
Quick Guide
Cash Drawer
NX-HQ-410

Key features and
specifications
 High quality electric metal drawer
 RJ interface for direct connection to the POS or
POS printer
 4 adjustable compartments for bills
 8 compartments for coins
 Double front slot for storing checks, credit card
slips and other documents without opening the
drawer
 Security key
 Approximate weight 8 Kg.
 Approximate dimensions: 41cm x 41cm x 10cm.
 1.2 meter RJ cable
 Opening sensor
Content
We recommend that the user check that the
box includes all the items listed here:
• Cash drawer (1 Unit)
• Drawer compartments bills (1 Unit)
• Coin compartment drawer (1 Unit)
• RJ cable (1 Unit)
• Keys (2 units)
Frontal
1. Rubber Support
2. RJ Cable
3. Lock
1. Compartments bills
2. Money clip
3. Coin compartments
4. Checks aperture
5. Checks compartment