Nobacco L-300 User manual

1
Pro d u c t m anual
L-300

L-300 L-300
32
Product manua l E N
Thank you for selecng the NOBACCO
L-300 atomizer.
Please read the manual supplied and make
sure that you have fully understood it
before using the product. If you require any
addional informaon about the product
or its use, please consult your local reseller
or visit NOBACCO’s official website at
www.nobacco.world.
Designed and manufactured by NOBACCO
DESIGN CENTER, NOBACCO L-300’s
body is made out of stainless steel so as to
ensure maximum durability, while the use
of PYREX glass along with high purity
organic coon, as absorbing material in the
coil heads, guarantees superior taste
quality. With a leak resistance "cup"
design, it has a rotang top airflow system
for ease of use and enhanced flavour.
PACKAGE CONTENTS*
1 x NOBACCO L-300
1 x 0.5 Ohm Kanthal coil head
1 x 0.5 Ohm SS316 coil head
1 x Protecve silicone ring
1 x Extra glass tube
User manual
*The company reserves the right to
change the contents and characteriscs
of the package or/and the product
without any prior noce.
SPECIFICATIONS
Diameter: 22mm
Height: 45.8 mm
Net Weight: 39gr
Capacity: 2ml

L-300 L-300
54
Product manua l E N
1
2
3
4
5
Mouthpiece
Rotang ring
Top part
Coil head
Atomizer tank -
Base
PREPARATION, OPEN AND REFILL
Your atomizer comes assembled, with a
coil head aached.
In order to prepare the atomizer for the
first use, unscrew the top part and remove
the coil head.

L-300 L-300
76
Product manua l E N
CAUTION
The first me you are using the atomizer
and every me you install a new coil head
saturate the organic coon of the coil head
by pouring a few drops of e-liquid through
the feed holes on its sides.
Reaach the coil head into the top part
and fill the tank with e-liquid up to MAX
point. Reconnect top part unl it is
securely screwed to base to avoid leakage.
CAUTION
Aer the preparaon of the new coil head,
leave the atomizer for five (5) minutes
prior to use to allow the coil head to be
fully saturated.
To refill the atomizer tank, you don’t need
to remove the coil head. Simply unscrew
the top cap and pour e-liquid.
CAUTION
Under no circumstances, the atomizer tank
should be empty of e-liquid, during usage.
Malfuncon may occur and you are

L-300 L-300
98
Pr oduct manua l E N
running the risk of destroying the coil
head. You are advised to refill when
e-liquid level drops below coil head’s feed
holes.
USE
Screw the atomizer onto the device
without using excessive force and then
inhale gently while pressing the fire buon
of the device. For peak performance, you
are advised to press and leave the
acvaon buon one (1) second prior
starng and ending your inhalaon.
The air flow control allows you to adjust
the air intake according to your preference.
CAUTION
While inhaling, airflow control system must
never be fully closed in order for the
atomizer to be able to perform properly.
Otherwise e-liquid may squirt in the coil
head causing malfuncon.
TO MAINTAIN PEAK PERFORMANCE THE
COIL HEAD NEEDS TO BE REPLACED
PERIODICALLY.
Its life me depends on the usage and the
e-liquid’s composion.
When a decrease in the amount of vapor
and/or a tainted taste is noced, while
using a recently charged baery, it may be
me to replace the atomizer head.
For sanitary reasons, frequently wash the
detachable mouthpiece with warm water.
If you noce any humidity on the base of
the mouthpiece, use a clean piece of paper
to absorb it.