Nolan NSRX3C25XX User manual

P/N NSRX3C25XX
USER GUIDE
Stereo Receiver(BTRX)
Bluetooth Wireless
Declaration of Conformity. We declare that product
NSRXRM3C2MSX conforms to the R&TTE Directive
1999/5/RC.
0678
FCC ID:TNZSRX3C2XXX

Please check the contents carefully and
contact your local dealer immediately if
anything is missing or damaged.
GETTING STARTED
Unpack the package carefully and confirm
that you have all of parts as shown below.
USB charging cable
INTRODUCTION
This Bluetooth Stereo receiver (Rx) offers
the latest innovation in Bluetooth
technology. It listen the music and talks on
a Bluetooth mobile phone automatically
when the phone call in.
Receiver
3.5mm stereo cable 3.5mm earphone

CHARGING
Before using the Rx, you must charge it for
approximately two hours. After fully
charged, the battery provides up to 5 hours
of music play/talk time and up to 100 hours
of standby time .
PRODUCT OVERVIEW
See image below. Please note some
models of Rx will differ slightly in style,
colour and the functionality may vary
according to their specifications.
Mic
Clipper
On/Off
/Talk Button
3.5’ Audio
Jack
USB Charging
Connector
LED

Plug the USB charging cable into
microphone mini USB connector. Plug the
other side of the USB charging cable into a
powered USB connector.
When charging, the amber LED will be
lighted. When charging is completed, the
amber LED will be turn off.
or

PARING
2. After the Rx is in pairing state,
initiate Bluetooth search feature and find
the device name “BTRX”.Refer to your
iPhones’, PCs’ User Guide. If pin code
requested during pairing, please submit the
pin code 0000.
To pair and connect with iPods,
iPhones, iPads, tablets, android phones,
Bluetooth MP3, music player, TV, laptop,
Mac and PCs…etc
AT&T 10:08 AM
Settings
Bluetooth
BTRX
Bluetooth
DEVICES
90%
1. Press and hold
the ON/OFF button for
about 3 seconds until
blue and amber light
blinking alternately.

TURN ON
Press and hold the ON/OFF button for
about 3 seconds, until the blue LED flashes.
Release the ON/OFF button. The Rx is now
turned on and will connect to the last used
device automatically.
TURN OFF
Press and hold the ON/OFF button for
about 3 seconds, the Blue LED will stay on
for about 1 second and then the Rx will be
turn off. Release the ON/OFF button.
3. The iPhone, iPad, PC should find
the Rx and pair with it. When both paired
and connected, the Mode LED changes to
flash slowly with blue colour.

A. Fit earphone to Rx,
Plug your earphone 3.5mm audio plug into
the Rx’s 3.5 mm audio jack, you can listen
the audio and music from earphone.
B. Fit audio cable to Rx,
Plug your 3.5mm audio plug of audio cable
into the Rx’s 3.5 mm audio jack and another
side connect to “Audio In” of your music
speaker or stereo systems. Then, you can
enjoy audio and music freely.
Playing Rx to Receive and Listen
Stereo Music
USING RECEIVER
After connected, the Rx will receive and
stream the audio/music from the Bluetooth
audio/music device wirelessly.
AUX
AUDIO
INPUT

Receiving Calls
When your mobile phone rings, press the
talk button on your Receiver. The call is
automatically connected to your receiver.
Please note you can also reject calls by
depressing the talk button for about 1
second. (Not all phones support this
feature)
Making Calls
You can make calls from your
iPhone/rmobile phone or directly from Rx
using voice dialing (if it’s supported by the
phone)
To make calls from your iPhone/mobile
phone - Dial the call from your mobile
phone and the call is automatically
connected to your Rx.
max. 20cm
8 inches

To increase the audio volume
While listening music, click the ON/OFF
button once to increase the volume by one
step. Repeat this procedure until you reach
the desired level.
To decrease the audio volume
While listening music, quick click the
ON/OFF button two times continuously to
decrease the volume by one step. Repeat
this procedure until you reach the desired
level.
Ending Calls
When you have finished your call, press the
talk button on your Receiver. The call will
be disconnected.
Adjusting the Rx Audio Volume
※
Note: Adjust the Audio Volume only
available in music play mode. When in call,
the button is using for call function as
answer or end a call.

VISUAL INDICATION
The LED can also indicate the status of
microphone working statues.
Statues Indication
Charging amber LED is On
Not Connected
Power On
Power Off
Rx in pairing mode
blue LED flash
blue LED stay on
1 second
blue LED Low speed
flash, approx. every
5 seconds
amber and blue LED
blink alternating
Connected and
play music / in call.
blue LED
middle
speed flash
TROUBLESHOOTING
Please note that you should also be familiar
with the operation of your audio receiver,
mobile phone or other connecting
Bluetooth device. Please read the User
Guide for your device carefully. For opera-
tion with a PC or laptop please note that

these devices should also be Bluetooth
enabled with appropriate third party
software in order to enable correct opera-
tion.
Stereo receiver and
music player or
mobile phone was out
of range for more than
30 seconds. Switch
both off and switch on
again to reconnect.
Ensure the audio
receiver’s PIN code is
0000.
Stereo receiver does
not reconnect.
Lost Connection.
Blue LED flashes at
5 second intervals.
Stereo receiver will
not pair with audio
player or mobile
Likely Cause / Solution Problem
CUSTOMER SERVICE INFORMATION
For other Nolan Bluetooth products or
support, please view our website –
www.nolan-sys.com or email info@nolan-
sys.com or contact your local representative.

ENVIRONMENT
Do not throw this electrical device away with
the normal household waste at the end of its
life, but hand it in at an official collection
point for recycling. By doing this you will help
to preserve the environment.
DISCLAIMER
Whilst every effort has been made to ensure
that the information in this manual is
accurate and complete, no liability will be
accepted for any errors and/or omissions
made. The manufacturer reserves the right
to make changes and improvements to the
specifications and features of the hardware
and firmware of the products described in
this document without prior notice. Repro-
duction, transfer, distribution or storage of
part or all of the contents in this document in
any form is prohibited without prior permis-
sion of the manufacturer. All trademarks
acknowledged.