Nolii Set User manual

Set
Set Battery + Set Plugs
(UK/EU/US)

Product Name: Set Battery
Product type: Rechargeable power bank
Model No: M4.C1.2Z/M7.C1.2Z, M4.C2.2Z/M7.C2.2Z,
M4.C3.2Z/M7.C3.2Z
Ratings: Input: PIN 5V 2A (max) Output: Lightning 5V 1A
(max) / USB-A 5V 2.4A (max) →6400mAh
Product Name: Set Plugs (UK,US,EU)
Product type: Plug
Model No: M4.C1.2Z/ M7.C1.2Z, M4.C2.2Z/ M7.C2.2Z,
M4.C3.2Z/ M7.C3.2Z
Ratings: Input: AC 100-250V~50/60Hz 0.07-0.15A
Output: USB-A 5V 3A (max) / PIN 5V 2A (max)
Warranty
At Nolii, we are dedicated to making the best quality
products. To back this up, this product is warranted for 1 year
from the date of purchase. This warranty does not affect any
statutory rights that you may be entitled to. Keep a copy of
your purchase receipt as proof of purchase. Be sure to register
your product at www.wearenolii.com. Failure to register your
product and/or provide proof of purchase may void
the warranty.
Exclusions & Limitations
Except for the limited warranty expressly set forth or to
the extent restricted or prohibited by applicable law, Nolii
expressly disclaims any and all other warranties express or
implied, including any warranty of quality, merchantability,
or tness for a particular purpose, and you specically agree
that Nolii shall not be liable for any special, incidental,
indirect, punitive, or consequential damages for breach of any
warranty of any type on any Nolii product. In addition to and
without limiting the generality of the foregoing disclaimers,
the limited warranty does not, under any circumstance, cover
the replacement or cost of any electronic device or personal
property inside or outside of the Nolii product.
Customer Service
Email: [email protected]
Web: www.wearenolii.com
WARNING!
Read all instructions and warnings prior to using this
product. Improper use of this product may result in product
damage, excess heat, toxic fumes, re or explosion, for
which damages you (“Purchaser”) and not Nolii Ltd
(“Manufacturer”) are responsible.
Risk of re and burns.
Do not open, crush, heat above 40°C or incinerate.
Do not short circuit. Avoid storage in direct sunlight.
Do not subject cells or batteries to mechanical shock.
Retain the original product literature for future reference.
EN Use only in the application for which it was intended.
Dispose of properly.
For indoor and dry location use only.
Instructions for Use
The battery functions using a capacitive button indicated on
the illustration. It serves as both an ‘on’ button and a battery
charge level check.
Charging Set Battery
ȲAttach Set Plug to Set Battery magnetically
ȲPlug Set Plug with Set Battery into a mains socket
ȲLEDs will ash until Set Battery is fully charged
Turning the Battery On
ȲPull out the integrated cable from the bottom of Set
Battery and insert into phone
ȲPress the capacitive button on the front of the battery to
begin charging
ȲLEDs are lit for duration of charge, indicating Set Battery’s
remaining charge (4 = 100%, 3 = 75%, 2 = 50%, 1 = 25%)
Turning the Battery Off
ȲSet Battery will automatically turn off once your phone
battery reaches full capacity
ȲOr unplug Set Battery from the phone
Checking Battery Charge Level
ȲPress the capacitive button on the front of the battery
ȲThe LEDs will indicate the level of charge remaining in
the battery
ȲAfter 20 seconds, the lights will switch off
Please Note
a. The power bank will generate heat when charging.
Always charge in a well ventilated area. Do not charge
under pillows, blankets or on ammable surfaces.
b. Keep the power bank away from heat sources, direct
sunlight, combustible gas, humidity, water or other liquids
c. Do not disassemble, open, microwave, incinerate, paint or
insert foreign objects into the power bank
d. Do not subject the power bank to mechanical shock such
as crushing, bending, puncturing, or shredding. Avoid
dropping or placing heavy objects on the power bank.
e. Do not short-circuit the power bank or store it in a
receptacle where it may be short-circuited by other
metallic or conductive objects
f. Do not operate the power bank if it has been wet or
otherwise damaged, to prevent against electric shock,
explosion, and/or injury. Contact the dealer or
authorized agent.
This product contains magnets. To reduce the risk of
interference with other electrical equipment, consult your
doctor and/or device manufacturer before using this product
if you have a pacemaker or other implanted electrical device.

ȲDo not store device in high-temperature environment,
including heat caused by intense sunlight or other forms
of heat. Do not place device in for or other excessively
hot environments.
ȲDo not disassemble this device or attempt to re-purpose
or modify it in any manner
ȲFor instructions or questions about the various ways to
change this device, refer to the illustrations in this
quick-start guide
ȲDo not attempt to replace any part of this device
ȲAll products have gone through a thorough quality
assurance inspection. If you nd that your device is
excessively hot, is emitting odour, is deformed, abraded,
cut or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use and
contact manufacturer.
Legal
This product is meant for use only in conjunction with the
appropriate device. Please consult your device packaging
to determine whether this product is compatible with your
particular device. Manufacturer is not responsible for any
damages to any device incurred through the use of
this product.
Manufacturer shall not in any way be liable to you or to
any third party for any damages you or any third party may
suffer as a result of use, intended or unintended, or misuse
of this product in conjunction with any device or accessory
other than the appropriate device for which this product
is designed. Manufacturer will not be responsible for any
damages you or any third party may suffer as a result of
misuse of this product as outlined above.
If you are responsible for product use with an unintended
device and damages result from such use, you agree to
indemnify Manufacturer for any resulting injuries to any
third party(ies).
Use of the Made for Apple badge means that an accessory
has been designed to connect specically to the Apple
product(s) identied in the badge and has been certied
by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Please note that the use of this accessory with an Apple
product may affect wireless performance.
Apple, iPhone, and Lightning are trademarks of Apple Inc.,
registered in the U.S. and other countries.
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Nolii Ltd of 151 Wardour St, Soho, London W1F 8WE,
declare under our sole responsibility that the products
M4.C1.2Z/M7.C1.2Z, M4.C2.2Z/M7.C2.2Z, M4.C3.2Z/
M7.C3.2Z to which this declaration relates, comply with
Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause
harmful interference, and (2) including interference that
may cause undesired operation.
Federal Communications Commission Notice
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
ȲReorient or relocate the receiving antenna
ȲIncrease the distance between the equipment and
the receiver
ȲConnect the equipment to an outlet on a circuit different
from that to which the receiver is connected
ȲConsult the dealer or an experienced radio/TV technician
for help
FCC Caution: Any changes or modications not expressly
approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
CE Declaration of Conformity
We, Nolii Ltd declare under our sole responsibility that the
product model M4.C1.2Z/M7.C1.2Z, M4.C2.2Z/M7.C2.2Z,
M4.C3.2Z/M7.C3.2Z, to which this declaration relates, is
in conformity with EMC Directive 2014/30/EU, Low Voltage
Directive 2014/35/EU & RoHS Directive 2011/65/EU (Recast).
We further declare that the product meets the essential
requirement of the above Directives. The limits contain in
these articles are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications.

However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of
the following measures:
ȲReorient or relocate the receiving antenna
ȲIncrease the separation between the equipment
and receiver
ȲConnect the equipment into an outlet on a circuit different
from that to which the receiver is connected
ȲConsult the dealer or an experienced radio/TV technician
for help
Caution: Any changes or modication not expressly approved
by the party responsible for compliance could void the user’s
authority to operate this equipment.
A copy of the European Union CE marking ‘’Declaration of
Conformity’’ may be obtained at the website:
www.wearenolii.com
For information on product disposal please refer to
www.wearenolii.com

Designed for Life