
CAMERA DIMENSIONS / LINE ART
HDDWMIR / HDDWMIRW
4-in-1, Full HD 1080p Outdoor IR Eyeball Camera
3.6mm, 60’ IR Range
PRODUCT FEATURES
•1/3” Sony CMOS Sensor
•Multi Format (TVI, CVI, AHD, 960H)
•3.6mm Fixed Focal Lens
•Mechanical IR Cut Filter
•Cable & UTC OSD Control
•Digital Wide Dynamic Range - 3D DNR
•60’ IR Range / 12 IR LED’s
•Sense-up / Northern Lights Technology
•12 Volt DC Power / IP66 Weatherproof
Rev. 022217
3625 Cincinnati Avenue, Rocklin, CA 95765 ♦855-388-7422 ♦www.northernvideo.com
SPECIFICATIONS
* All specications subject to change without notice for quality improvement
Model No. HDDWMIR HDDWMIRW
Image Sensor 1/3" Sony CMOS Sensor
Total Pixels 1984 x 1225
Active Pixels 1920 x 1080
Resolution 1920 x 1080 (1080p)
Scanning System Progressive Scan
OSD (On Screen Display) Dual OSD Access: Cable Mounted Joystick Controlled /
UTC Controlled (coaxial control)
Digital WDR (Wide Dynamic Range) Auto / O / On - 0 ~ 8 Adjustable
DNR (Digital Noise Reduction) 2D & 3D, Low, Middle, High, O
Video Output Dual Pigtail HD-TVI Main Output (yellow) /
960H Secondary Output (black)
Lens Type - True Day Night 3.6mm Fixed Focal Lens
Sense-up O / x2 ~ x30
Shutter Speed Auto, FLK, 1/30 ~ 1/50,000, x2 ~ x30
IR Cut Filter Built in Mechanical
Minimum Illumination 0.0 Lux IR LED On
IR LED Count / Range 12 IR LED's / 60' Range / 850nM
S/N Ratio More than 50dB
Automatic Gain Control 0 ~100 Adjustable
Sync System Internal
Gamma Characteristics y = 0.45 typ.
White Balance ATW / AWC->Set / Indoor / Outdoor / Manual
Back Light Compensation O / BLC / HSBLC
HBLC
(High Back Light Compensation)
On / O
Day/Night EXT / Auto / Color / B/W
Mirror Mirror / V-Flip / Rotate / O
Languages English, French, Spanish, German, Italian
(see OSD Menu for more)
Brightness 0 ~100 Adjustable
Motion Detection On/O (4 Zone Selectable)
Privacy Mask On/O (4 Zone Selectable)
Power Input 12VDC Only
Power Requirement 120mA / 450mA IR LED ON
Overall Camera Dimensions 3.7" x 2.6" (95mm x 65mm)
Housing / Color Aluminum - Gray Aluminum - White
Weight .75 Lb.
Operating Temperature -14°F ~ 122°F
Weatherproof Rating IP66
3.7” 2.7”
2.7”
2.7”
CAMERA COMPONENT DESCRIPTIONS
Mounting Base
Locking Collar
CAMERA CABLE CONNECTION
Insert power lead into power connector (insure proper
voltage is supplied and observe polarity).
Insert video lead into BNC connector (push, then twist to
lock BNC connector in place).
Use In-Line OSD control to select format:
960H Mode : Push OSD LEFT for 5 seconds
AHD Mode : Push OSD RIGHT for 5 seconds
CVI Mode : Push OSD UP for 5 seconds
TVI Mode : Push OSD DOWN for 5 seconds
In-Line
Cable Mounted
OSD Control
OSD CONTROL
Press the Joystick button on the
cable mounted OSD control to
access the OSD menu.
PACKAGE CONTENTS
(1) Camera
(1) Mounting Hardware Packet
(1) User Manual