NorthQ Q-Door User manual

1
Q-Stick Setup
1
v1.1
Q-Door Installation Guide

2
Q-Stick Setup
1
Thank you for buying a NorthQ product. Our devices gives you and
your family the opportunity to experience a new way of living.
This user manual helps you to get Q-Door installed. The
installation can be performed using PC, Tablet or Smart Phone.
In order to use the Q-Door with HomeManager you need to have
a NorthQ gateway (Q-Stick, Q-Gate or Q-Gate Pro).
Welcome

3
Q-Stick Setup
1
1.Q-Door Installation

4
Q-Stick Setup
1Q-Door Installation
Q-Door is an innovative door sensor and when in Armed Mode
settings, it sends an an alert whenever a door or a window is
opened. Additionally, it detects changes changes in humidity,
temperature and light.
1

5
Q-Door Installation
Go to HomeManager menu
Select Install
1
2
1

6
Q-Stick Setup
1
Select Q-Motion
Click on Next
3
4
1
Q-Door Installation

1
7
Q-Door Installation
Insert the batteries
Press the button 3 times
5
7
1
6Click on start pairing

8
Q-Stick Setup
1
Check if device is paired
Click on Next
9
8
Q-Door Installation

9
Q-Door Installation
Click on Next
10
1
Insert Sensor Name
Assign Sensor to a Room
10
11

1
10
Q-Door Installation
Use the adhevise tape to mount the sensor on the door/
window frame.
The magnet has to be mounted at a maximum distance of 1.9
cm from the sensor.
1
Mount the sensor in the room
11
Click on Finish
12

A New Way of Living
Strandvejen 157 | 2900 Hellerup | Denmark
email: [email protected] | website: www.northq.com
NorthQ ApS