Meiji MSD-01 User manual

MEIJI MINI SMOKE DETECTOR MSD-01
13
1134-CPR-101
EN 14604
I. Technical Parameters
Working Voltage: DC 9V CR 2450 3VX3
Quiescent Current: < 10uA
Alarming Current: < 20mA
Alarming Decibel: > 85dB/3m
LED Indicator: LED (Red)
Low Voltage Alarming : < 7.3V
Working Temperature: -10°C~+40°C
Working Humidity: < 95%RH

II. Dimension (mm)
III. TO TEST:
Note: if battery is installed correctly, the item will not work.
If the item is working, a red LED will flash once in a 40 second interval.
1. Counter rotate the installation panel in order to remove it.
2. Remove the insulated material to make sure the battery is connected
correctly.

3. Adjust the 3 clips of the installation panel to the 3 notches of the detector
and turn the smoke detector clockwise in order to lock it.
4. Press the test button, once you see the red light once and hear the buzz, it
means your item is working well.
*Note: The BUZZ is loud.
IV. TO INSTALL:
1. Choose a desired positon for your smoke detector (ceiling).
2. Use the screw to fix the installation panel on the ceiling.
3. Turn the smoke detector clockwise in order to lock it to the installation
panel tightly.

Do not place this product in a humid, dusty and/or smoking
environment
V. Low Battery Alarm
When the battery is low, the detector will buzz to indicate that the battery must
be replaced
VI. Notice
If the smoke detector is not working, please check the battery. If the battery is
okay, please contact a professional to check your live smoke detector.