Norton MZ-5PA064B User manual

Norton Ghost 15.0
How to copy partitions from an HDD to a Samsung SSD
This Quick User Guide was created under Symantec’
s authorization by Samsung
Electronics Co., Ltd. in order to offer a simple & easy data migration process for
Samsung SSD Users.
This user guide only covers drive (partition) copying. For the complete user manual,
including information on the other features of Norton Ghost 15.0, please see the full
user guide provided by Symantec.

2
Table of Contents
CHAPTER 1 ...................................................................................................................................................................................3
GETTING STARTED......................................................................................................................................................................4
1.1 Before you install….............................................................................................................................................4
1.2 Installing Norton Ghost..................................................................................................................................4
To Install Norton Ghost.......................................................................................................................................5
To Complete the Installation...........................................................................................................................5
CHAPTER 2 ...................................................................................................................................................................................6
MIGRATING YOUR DATA.............................................................................................................................................................7
2.1 Preparing your drive.........................................................................................................................................7
2.2 To Start Norton Ghost .....................................................................................................................................8
2.3 Copying your drive......................................................................................................................................... 10
For Windows XP Users...................................................................................................................................... 10
For Windows 7 Users......................................................................................................................................... 14
APPENDIX 1............................................................................................................................................................................. 23
To burn the Symantec Recovery Disc….................................................................................................... 24
A.1 Windows 7 Users.......................................................................................................................................... 25
A.2 Windows XP Users (InfraRecorder)............................................................................................... 26
APPENDIX 2............................................................................................................................................................................. 28
Symantec Technical Support............................................................................................................................ 29

3
Chapter 1
Getting Started

4
Getting Started
1.1 Before you install…
Please make sure your computer meets the minimum system requirements:
Component Minimum Requirements
Operating System Windows XP or later
PC Memory (RAM) 512 MB
Available hard disk
space
You will need between 430 MB and 1 GB of free
space to install Norton Ghost and its related
software components.
CD-ROM or DVD-
ROM drive
The drive can be any speed, but it must be capable
of being used as a startup drive from the BIOS.
Software Windows XP users will need to install the
Microsoft .NET Framework 2.0 or later to run
Norton Ghost.
If the .NET Framework is not already installed, you
are prompted to install it after Norton Ghost is
installed and your computer is restarted.
NOTE: If you are using a notebook computer, you must purchase a
separate USB to SATA adapter cable for the data migration step.
1.2 Installing Norton Ghost
NOTE: The CD included with your SSD is in English only. Norton Ghost is
available in 10 languages, however. If you would like to download a copy
in your native language, please visit www.samsung.com/ssd or follow the
direct download link in the “Site Link” section of the Samsung SSD Magician
software. You will find two files available to download for each language:
(1) a full ISO file containing both Norton Ghost and Symantec Recovery
Disk (SRD) software, and (2) a simple setup file containing only the Norton
Ghost software. The SRD feature allows you to boot from CD if Windows
cannot start. If you want to take advantage of the full functionality of
Norton Ghost, you should download and burn the ISO file to a CD.
Instructions for how to burn the ISO file can be found in Appendix 1.

5
To Install Norton Ghost
1. Log on to your computer using either the Administrator account or an
account that has administrator privileges.
2. Insert the Norton Ghost product CD into the media drive of the
computer. The setup file should automatically run. If you downloaded
your copy of Norton Ghost from Samsung’s website
(www.samsung.com/ssd), double-click on the install file instead.
3. In the window that appears, click [Install Norton Ghost].
4. In the License Agreement panel, read the license agreement and then
click [I accept the terms in the license agreement].
5. Click [Install Now]in the License Agreement panel to begin the
installation process.
6. Click [Finish]to complete the installation.
Important:If you are using the CD, remove it from the media drive
and then click [Yes]to exit the installation wizard and restart the
computer. You must restart your computer before you can use Norton
Ghost.
To Complete the Installation
After you install the product, you are prompted to enter a license key and
activate it. You can then run LiveUpdate to check for product updates and
configure your first backup.
1. In the Welcome panel, click [Next].
2. Click [I’ve already purchased the product and have a license key]. You
can find the license key on the back of your product CD jacket. Do not
lose the license key. You must use it every time you install Norton
Ghost. You may use the included English license key for any version
of Norton Ghost.
3. Click [Next].
4. Click [Run LiveUpdate]to check for any product updates released
since the product shipped. This will ensure that you have the most up-
to-date software possible.
5. Click [Finish]

6
Chapter 2
Migrating Your Data

7
Migrating your Data
Important: In order to use the “Copy My Hard Drive” feature described
below, your new SSD must be larger than the cumulative size of all data
stored on your current HDD. If your new SSD is not large enough to
accommodate all of the data on your HDD, please delete or backup any
unimportant files on your HDD.
2.1 Preparing your drive
1. If you are using a Desktop PC, connect the SSD to any available SATA
cable connection. You may use the cables included in the box. If
you are a notebook user, you must purchase a separate USB to SATA
adapter cable.
2. Windows will automatically install the “Device Driver,” but Windows
Explorer will not recognize the SSD.
3. Launch the “Computer Management” program by doing one of the
following:
A. Search for “Computer Management” in the Windows Start Menu
B. Go to Control Panel > Administrative Tools > Computer
Management
4. Select Disk Management from the menu on the left-hand side of the
screen. It is located under the Storage category in the sidebar.
5. An “Initialize Disk” window should automatically pop up. If it doesn’t,
Select Disk 1, and choose “Initialize Disk” from the pop-up menu. You

8
can tell if your disk has already been initialized by checking the status
in the left-hand column. If the disk is labeled as both “Unknown” and
“Not Initialized,” as in the screenshot below, the system has not yet
performed the initialization process.
6. In the “Initialize Disk” dialog window that appears, choose MBR for the
partition style and click [OK].
NOTE: If “Disk 1, Basic, ###GB (where ### refers to the size of your SSD
drive), Online” is displayed, your SSD is ready to use. DO NOT format the
drive. Leave it “Unallocated.” If the drive is already formatted and/or
has partitions allocated, you must remove all existing partitions.
2.2 To Start Norton Ghost
Norton Ghost is installed in the Windows Program Files Folder by default.
During installation, a program icon is installed in the Windows system tray
from which you can open Norton Ghost. You can also open Norton Ghost
from the Windows Start menu.

9
Depending on the Windows version you are running, use one of the
following methods:
On the classic Windows taskbar, click Start > Programs > Norton
Ghost > Norton Ghost
On the Windows taskbar, click Start > All Programs > Norton Ghost
> Norton Ghost
In the Windows system tray, double-click the Symantec Norton
Ghost tray icon
In the Windows system tray, right-click the Norton Ghost tray icon
and click Open Norton Ghost

10
2.3 Copying your drive
Important: If the hard drive that you want to copy contains more than
one partition, you must copy each partition, one at a time, to the new hard
drive. If the power or the hardware fails while you copy the data, no data
is lost from the source drive. However, you must restart the copying
process from the beginning.
For Windows XP Users
Before beginning the copy process, you must first determine how your
drive is partitioned. Windows XP users will see cases similar to the
following:
Case 1
In the scenario above, the drive is partitioned into two separate “Primary
Partitions.” The first partition, “C:” contains the Windows OS and its
essential files, while the second partition “D:” contains all user data.
While in this example there are only two (2), you may have up to four (4)
separate data partitions.
Case 2
In the other likely scenario, the user will see one “Primary Partition”
containing all Windows OS files and user data together.
Regardless of which scenario above is similar to your own, follow these
steps:
1. Make sure the SSD is connected and initialized.
2. Select [Tools]from the Norton Ghost toolbar.