Novogratz 2115029N User manual

Thank you for purchasing !
Weight Limit: 600 Lb / 272 Kg
DO NOT RETURN TO THE STORE !
If parts are missing or damaged, we will gladly ship your
replacement parts free of charge.
3 Seater Sofa

DO NOTuse
powertools
2
1hour
Limited 1 year Warranty
We warrants this product to be free from defects in material and workmanship
and agrees to remedy any such defect. This warranty covers one year from the
date of original purchase from authorized retailers. This is solely limited to the
repair or replacement of defective parts and assembly labor is not included.
This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or repaired
in any way.The warranty does not cover wearing, tearing, fading or splitting of
the fabric (where applicable). Liability for consequential damages is excluded to
the extent exclusion is permitted by law. This warranty gives you specific legal
rights and you may also have other rights which vary from state to state or
province to province.
To obtain warranty service, purchaser must present original bill of sale.
Components repaired or replaced are warranted through the remainder of the
original warranty period only. The defective components will be repaired or
replaced without charge, subject to the terms and conditions described above.
Read Before Beginning Assembly
●Work in a spaciousarea and near where the unit will be used, preferably on a
carpet, or use a piece of the cardboardpackagingto protect your floor and product.
●Make sure all parts are included. Most parts are labeled or stampedon theraw
edge.
●Read each step carefully. It is very importantthat each step of the instructionsis
performed in the correct order. If these steps are not followed in sequence, assembly
difficulties will occur.
●This product may contain small components. Please ensure that they are kept
away from small children.
●This product is designed for home use and is not intended for commercial use.
This product is shipped in
1 carton

PARTS
3
A
B
C
D
E

Arm B and Arm C are packed
insideSeat A.
PARTS LIST
Seat
1PC Armrest 1PC Armrest 1 PC
Back
1 PC Leg 4 PCS
4
A B C
DE
Each part has a unique part number. Please reference the appropriate
part number when contacting customer service for replacement parts.
Before throwing any packaging, please verify all contents and make
sure you have received all the parts listedabove!

HARDWARE LIST
Plastic Washer M10
X 4
5
1HardwarePack
(Gray Velvet) (Green
Velvet)

Step 1
6
Carefully unpack parts/hardware from the
storage of the seat body and place on a
clean flat surface.
A

Step 2
7
Place both arms (B), (C) as shown below,
secure the two legs (E) and plastic
washers (1) into the pre-drilled holes at
the bottom of the arms. Please do not
overtighten them.
E
E
1
1
1
BC
/

Step 3
8
Carefully lift and turn upright the
assembled arms (B) & (C) on their legs.
Attach the seat (A) to its arms (B) & (C)
by inserting the metal brackets on seat (A)
into the metal glides on the arms (B) & (C)
as shown below.
Make sure everything is placed correctly.
B
C
A

Step 4
9
Insert the backrest placing its ear piece
metal plates on both arms’s (B) & (C)
brackets as shown below.
Make sure everything is placed correctly.
C
B
E
D
A

Step 5
10
Stretch and pull down the rear fabric
cover evenly before securing it with the
Velcro strip to the seat base.
Repeat if necessary to achieve a better fit.