Novogratz 5391015COM User manual

5391015COM
NIGHTSTAND
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B345391015COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
Follow Ameriwood Home
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Assembly Difficulty Meter
Easy Tough

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

3
ameriwoodhome.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
ameriwoodhome.com
Board Identification
Not actual size
Left Panel
35391015010 Right Panel
35391015020
Top
35391015030
Bottom
35391015040
Drawer Back
39991167041140B
Drawer Front
35391015050
Drawer Bottom
39991340042110D Drawer Side (2)
39991167346200C
AB
C
D
FDWR
BACK
DWR
SIDE
E

5
ameriwoodhome.com
Board Identification
Not actual size
Back Panel
K53911510
This piece is paperboard construction.
It is not made from wood, but is
required for the assembly of your unit.
A
B
C
I
I
D
DWR
BACK
DWR
SIDE
DWR
SIDE
F
E

6
ameriwoodhome.com
Part List
Actual Size
Not Actual Size
12
5
13
78
610
(x4)
#A22620
cam lock
(x4)
#A22610
cam bolt
(x4)
#A21660
wood dowel
(x4)
#A23030
confirmat screw
(x20)
#A21110
nail
(x2)
#A54520
Drawer Bracket
(x1)
#A56770
Drawer Slide Kit
Right Drawer Member
Left Drawer Member
Right Cabinet Member
Left Cabinet Member
(x10)
#A11080
7/16" flat head
(x8)
#A12120
7/16" pan head
(x4)
#A21970
drive fastener
3
4
9
(x1)
#A17400
7/8" bolt
(x12)
#A15600
euro screws
11a
11b
11c
11d
(x1)
#A51975
Knob (x4)
#A44610
Metal Leg
12
14

7
ameriwoodhome.com
STEP1
(x2)
#A22620
11a
4
(x2)
#A21660
Left Cabinet Member
(x1)
#A56770
(x3)
#A11080
6
1
11a
Marked with a "L".
6
4
1
A
Proper orientation of CAM LOCK
Tip
Assembly
Quick

8
ameriwoodhome.com
STEP2
(x2)
#A22620
4
(x2)
#A21660
Right Cabinet Member
(x1)
#A56770
(x3)
#A11080
1
Marked with a "R".
6
1
4
6
11b
11b
B
Proper orientation of CAM LOCK
Tip
Assembly
Quick

9
ameriwoodhome.com
STEP3
2
(x4)
#A22610
2
2
22
C

10
ameriwoodhome.com
STEP4
5
5
(x4)
#A23030
unfinished surface
5
5
5
A
B
D

11
ameriwoodhome.com
STEP5
A
B
D
C
UNLOCKLOCK

12
ameriwoodhome.com
STEP6
14
8
(x4)
#A44610
(x12)
#A15600
8
8
8
8
14
14
14
14
D

13
ameriwoodhome.com
STEP7
(x20)
#A21110
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
With the help of another person, turn the unit over as shown.
Position the back panel (I) as shown. Flush the bottom edge of the back panel with the
edge of the bottom (D). Assure that the unit is square. Distance from the corner must be
equal as shown. Attach the back panel by nailing straight into back edges as shown.
10
10
I
D
raw surface
Assure that the unit is square.
Distance from the corner must
be equal as shown.
Flush the bottom edge of the
back panel with the edge of the
bottom (D).

14
ameriwoodhome.com
STEP8
13
(x4)
#A12120
(x2)
#A54520
Fasten the brackets to the opposite surface of the small metal slide holes.
7
7
DWR
SIDE
DWR
SIDE

15
ameriwoodhome.com
STEP9
Attach the drawer sides to the Drawer Front (E) with screws (7) as shown. Be sure the groove in
the drawer sides are centered with the groove in the drawer front.
(x4)
#A12120
7
7
E
DWR
SIDE
DWR
SIDE

16
ameriwoodhome.com
STEP10
unfinished surface
E
F
DWR
SIDE
DWR
SIDE

17
ameriwoodhome.com
STEP11
DWR
BACK
(x4)
#A21970
9
9
Unfinished
Surface
99
9

18
ameriwoodhome.com
STEP12
Marked with a "R".
Marked with a "L".
(x4)
#A11080
(x1)
#A56770
Right Drawer Member
Left Drawer Member
11c
11d
6
6
6
11d
11c

19
ameriwoodhome.com
STEP13
312
(x1)
#A51975
(x1)
#A17400
3
12

20
ameriwoodhome.com
STEP14
cabinet member
roller
drawer runner
roller
Note: The drawer bracket holes are slotted. Drawer
fronts can be adjusted by loosening screws, making
needed adjustments and retightening screws.
Install the drawer as shown.