Novogratz 5747015COM User manual

5747015COM
Headboard
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B345747015COM1
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
Follow Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Assembly Difficulty Meter
Easy Tough
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 2 HOUR
S

3
ameriwoodhome.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
ameriwoodhome.com
Board Identification
Not actual size
Top
35747015030
Left Post
35747015040
Upper Panel Assembly
35747015010
Lower Panel
35747015020
Right Post
35747015050
A
B
CD
E

5
ameriwoodhome.com
Board Identification
Not actual size
A
B
C
D
E

6
ameriwoodhome.com
Part List
Actual Size
Use on the full size bed.
1
(x5)
#A22980
quick connect
(x12)
#A12930
1-1/8" pan head
(x4)
#A20480
1/4" nut
(x8)
#A25400
1/4" washer
(x4)
#A19875
1-3/4" hex head bolt
5
(x4)
#A81185
spacer
(x4)
#A19885
2-3/4" hex head bolt
67
These two items are for use on the queen size bed.
234
(x4)
#A81180
spacer
8

7
ameriwoodhome.com
STEP1
1
(x5)
#A22980
A
1
1
1
1
1
Be sure the connector is positioned as
shown before pushing into holes.
1

8
ameriwoodhome.com
STEP2
Finished Edge
2
2
2
2
2
2
2
2
2
2
2
2
E
D
B
A
(x12)
#A12930
2
Raw Surface

9
ameriwoodhome.com
STEP3
A
C
Turn screw clockwise
to lock in place.

10
ameriwoodhome.com
STEP4
4
3
5
(x4)
#A20480
(x8)
#A25400
(x4)
#A19875
Use on the full size bed.
7
6
(x4)
#A81185 (x4)
#A19885
6
4
Hardware supplied for attaching the headboard to the bed.
Bolt and washer go on inside of bed frame.
Position spacers between Queen bed frame
and headboard.
The spacers (6 & 7) go between the
headboard and bed.
(x4)
#A81180
8
3
47
8