Novus 4000 series User manual

User manual
version 1.4
4000 ser ies IP c am eras

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
2
1. WWW INTERFACE ........................................................................................................... 5
1.1. Remote viewing window view - main page ................................................................... 5
2. CAMERA OPERATION MODE - PLAYBACK.............................................................. 8
Description of the player's operation for the selected “General” option .............................. 8
Description of the player's operation for the selected “AI” option ..................................... 10
“Face detection” search menu .................................................................................... 10
“Human & Vehicle Detection” search menu ............................................................. 12
“PID & LCD” search menu........................................................................................ 13
“Repeat customer” search menu ................................................................................ 14
“Face attendance” search menu ................................................................................. 15
3. CAMERA CONFIGURATION - REMOTE SETTING ................................................ 17
3.1. “Channels/Video” group of settings ............................................................................. 17
3.1.1. “Live” menu..................................................................................................... 17
3.1.2. “Image Control” menu ..................................................................................... 17
Basic options - cameras with white light illuminator ......................................... 18
Basic options - cameras without white light illuminator .................................... 19
Advanced options ............................................................................................... 19
3.1.3. “Video Cover” menu........................................................................................ 20
3.2. “Streams/Record” group of settings ............................................................................. 21
3.2.1. “Encoding” menu .............................................................................................. 21
3.2.2. “Record” menu .................................................................................................. 22
3.3. “Alarms” group of settings .......................................................................................... 22
3.3.1. “Motion” menu ................................................................................................. 22
3.3.2. “PIR” menu ....................................................................................................... 23
3.3.3. “Alarm input (I/O)” menu ................................................................................ 23
3.3.4. “Sound detection” menu ................................................................................... 24
3.3.5. “Deterrence” menu ........................................................................................... 24
3.3.6. “Video Tampering” menu ................................................................................ 25
3.4. “AI” group of settings ................................................................................................... 25
3.4.1. “Settings” menu................................................................................................. 25
3.4.1.1. “Face Detection” (FD) menu ................................................................. 25
3.4.1.2. “Person & Vehicle Detection” (PD&VD) menu ................................... 28
3.4.1.3. “Perimeter Intrusion Detection” (PID) menu ........................................ 29
3.4.1.4. “Line Crossing Detection” (LCD) menu ............................................... 31
3.4.1.5. “Stationary Object Detection” (SOD) menu.......................................... 33
3.4.1.6. “Cross Counting” (CC) menu ................................................................ 35
3.4.1.7 “Heat Map” (HM) menu ......................................................................... 37
3.4.1.8. “Crowd Density Detection” (CD) menu................................................ 38
TABLE OF CONTENTS

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
3
3.4.1.9. “Queue Length Detection” (QD) menu..................................................39
3.4.2. “Recognition” menu ..........................................................................................40
Editing groups (face databases) ...........................................................................41
Adding face photos to a group.......................................................................41
Deleting of face photos ..................................................................................42
Right-click options.........................................................................................42
3.4.3. “Alarms menu....................................................................................................42
3.4.3.1. “Alarms - Face Detection” (FD) menu ..................................................42
3.4.3.2. “Alarms - Face Recognition” (FR) menu...............................................43
3.4.3.3. “Alarms - Attribute Detection” (AD) menu...........................................44
3.4.3.4. “Alarms - Human and Vehicles Detection” (PD&VD) menu ...............44
3.4.3.5. “Alarms - Perimeter Intrusion Detection” (PID) menu .........................44
3.4.3.6. “Alarms - Line Crossing Detection” (LCD) menu ................................45
3.4.3.7. “Alarms - Stationary Object Detection” (SOD) menu...........................45
3.4.3.8. “Alarms - Cross Counting” (CC) menu .................................................45
3.4.3.9. “Alarms - Crowd Density Detection” (CD) menu.................................45
3.4.3.10. “Alarms - Queue Length Detection” (QD) menu ................................45
Function configuration ..................................................................................45
3.4.3.11. “Alarms - Face Attendance” (FA) menu..............................................46
3.4.4. “Statistics” menu ...............................................................................................47
3.4.4.1. “Statistics - Face detection” menu .........................................................47
3.4.4.2. “Statistics - Human and Vehicle Detection” menu................................48
3.4.4.3. “Statistics - Cross Counting Statistics” menu........................................48
3.4.4.4. “Statistics - Heat Map Statistics” menu .................................................49
3.5. “Network” group of settings...........................................................................................50
3.5.1. “General” menu .................................................................................................50
3.5.2. “Email” menu ....................................................................................................52
3.5.3. “FTP” menu .......................................................................................................52
3.5.4. “RTSP” menu ....................................................................................................52
3.5.5. “DDNS” menu ...................................................................................................53
3.5.6. “HTTPS” menu..................................................................................................53
3.5.7. “IP Filter” menu.................................................................................................53
3.6. “Device” group of settings .............................................................................................53
3.6.1. “HDD” menu .....................................................................................................53
3.6.2. “Audio” menu....................................................................................................54
3.6.3. “Cloud storage” menu .......................................................................................54
3.7. “System” group of settings.............................................................................................55
3.7.1. “General/Time” menu .......................................................................................55
3.7.2. “Users” menu.....................................................................................................55
3.7.3. “Maintain” menu ...............................................................................................56
3.7.4. “Info” menu .......................................................................................................58
TABLE OF CONTENTS

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
4
PRELIMINARY INFORMATION
PRELIMINARY INFORMATION
This user manual contains detailed information on the operation of the 6000 series IP cameras.
References in this publication of photos the camera and images can be simulations. The
actual images from the cameras may vary depending on the type, model, settings,
observation area or external conditions.
AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o. has made every effort to ensure that the
information contained in this publication is complete, accurate and up-to-date.
However, due to the continuous development of the product line, the appearance of
graphics, menu layout or function descriptions contained in this publication may differ
from those implemented in your device. This does not limit or invalidate this manual.
The following chapters describe all the functionalities of the 4000 series IP cameras.
However, depending on the camera model and/or firmware version, some functions may
not be available or not supported. Detailed information about the camera's functions is
included in the catalog card at www.aat.pl and in the “Quick Start Guide” attached to the
camera.
Technical data of the cameras, construction description, method of installation, start-up
and basic operation are included in the “Quick Start Guide” attached to the camera. When
using this “User’s manual”, always have the quick reference guide close at hand so that
you can refer to it for matters not covered in the instructions for use.

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
5
WWW INTERFACE - MAIN WINDOW
1. WWW INTERFACE
1.1. Remote viewing window view - main page
The remote preview window and menu shown on this and the following pages are displayed in
Internet Explorer with the “Surveillance PluginV2.exe” plugin installed and running with
administrator privileges. When connecting to the camera from browsers using HTML5 (for
cameras supporting this standard), some menu items and/or some options may not be available.
This is not a bug, but is specific to the HTML5 standard.
The description of the remote preview window, all its elements and functions can be found in
the quick start guide attached to the camera. For information on these parts and functions, please
refer to the quick start guide that came with your device. The quick start guide is also available
for download in the product card at www.aat.pl
7
6
34
1
5
2

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
6
WWW INTERFACE - MAIN WINDOW
1. Selecting a stream to display in the remote view window.
2. Live Preview window.
Double-clicking the left mouse button on the preview window enables and disables the display
of the image on the full screen.
3. Buttons for selecting the operating mode and configure the camera:
Playback - enables the playback panel of recordings from the memory card
Live - enables preview live stream
Remote Setting - displays the configuration panel camera
Local Setting - displays the configuration panel of paths to snapshots folders
4. Icon to access to the camera:
5. Buttons that enable the image adjustment panels and the lens control panel:
- displays information about the logged in user and the version of the applet
- logout from the camera
- enables and disables the video analytics event alarm display panel
The panel displays image analytics events such as facial recognition
and events with the classification of objects (vehicle-person
distinction). Details about e.g. the recognized person are displayed
under the event.
Settings button - allows you to select an event to be displayed
in the panel
Delete button - deletes events from the panel.
Note: closing the panel or going to the camera menu also clears the
displayed events.

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
7
WWW INTERFACE - MAIN WINDOW
6. Picture control buttons
7. Additional features control icons:
- enable the image adjustment panel - enable the lens control panel
The panel allows to adjust the field of view
(zoom) and focus. The “Autofocus” button
allows you to sharpen the image, “Restore” -
performs lens initialization (after completion,
set the desired zoom and focus), and
“Refresh” refreshes the settings.
The panel allows to adjust the color tone,
brightness, contrast, color saturation and
sharpness (clarity). The “Default” button
restores the factory settings, and the
“Refresh” button refreshes the settings.
- sets the original aspect ratio
- fits the image to the browser window
- sets full screen
- turns live view on and off
- enables and disables the record a video stream on your computer
- performs a screenshot and saves on your computer
- enables and disables the magnification of a section of the image
- enables and disables the audio monitoring

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
8
2. CAMERA OPERATION - PLAYBACK
Playback tab allows to play and manage recordings that the camera saves to the memory card.
1. Player configuration - allows you to select the type of recordings to play. From the “General”
drop-down list, select the type of recordings: the “General” option allows you to playing normal
recordings, alarm events and standard image analysis, and the “VCA” option allows you to
search for recognized faces, people and vehicles.
Description of the player's operation for the selected “General” option
After selecting the “General” option, select the date from which the recordings are to be played
from the “Date” drop-down list. A calendar will be displayed allowing you to select a specific
date. Days with available recordings are marked with a red underline. After selecting the day, in
the “Search type” section, select the type of recordings to be played. Selecting the “All” option
allows you to search for all types of recordings. The “Normal” option allows
WWW INTERFACE - GENERAL PLAYBACK
For a description of the player's operation for the selected “VCA” option, see page 10.
- enables and disables the pixel counter (displays the size of the selected area)
- enables and disables audio transmission
- enables and disables the white LED (warning light)
5.4.2.3.
1.

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
9
to search for normal recordings. The “Event” option allows to search for alarm event recordings.
Developing this option allows you to select a specific type of event. The “VCA” option allows
you to search for standard image analysis recordings and, similarly to the “Events” option - drop-
down this option allows to select a specific type of event. The “Attribute Detection” option
allows to search for recordings of face attribute detection events (ie the presence or absence of a
mask). After configuring the player, press the “Search” button to search for recordings.
2. Recordings timeline. After searching for recordings, a graphical representation of them will be
displayed in the timeline. The colors in the timeline correspond to the type of recording as shown
in the legend below the axis. User can change the range of time axis for precise selection of
recordings - using the mouse wheel or using the zoom buttons on the left side of the
timeline.
2. A player control buttons, from left:
- Play/Pause button
- Stop button
- Forward-one-frame button
- Record button allows to save the video being played back to your computer. Recording takes
place in real time and ends when the button is pressed again.
- Capture button to save on your computer currently displayed frame as a picture
- Download button allows to download a block of recordings. After pressing, an additional
window opens in which it is possible to select the appropriate block of recordings to be
downloaded.
The maximum block size is approximately 254 MB. After selecting the block covering the time
range you are interested in, press the “Start Download” button to download the recordings. The
window may close after the download has started.
WWW INTERFACE - „GENERAL PLAYBACK”

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
10
WWW INTERFACE - „AI PLAYBACK”
- button for changing the playback speed. After pressing it, the options for choosing the playback
speed, from x1/8 to x16, are displayed
- button to enable/disable the recorded sound from recordings
4. Preview window. Double-clicking by left mouse button on the preview window enables and
disables displaying of the image on the full screen.
5. Additional function buttons, from left:
- Zoom button enables and disables the zooming part of the image. Zooming is done by selecting
the part of the image with the mouse left button pressed. Pressing the right button restores the
original image size.
- sets the original aspect ratio
- fits the image to the browser window
- sets full screen
Description of the player's operation for the selected “AI” option
This option allows you to search and manage recordings that contain image analysis events. Searching
for recognized faces, people or vehicles, zone violations or line crossings, and attendance can be used
as criteria.
“Face detection” search menu
This menu allows to search for recordings containing faces, and also to compare them with the face
patterns stored in the database.
4
2
1 3

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
11
WWW INTERFACE - „AI PLAYBACK”
1. Search settings panel.
The “Start time” and “End time” options allow to set the time range in which the search is to take
place. The “Face Attribute” option allows to select specific facial features to filter search results.
This allows, for example, to narrow down the group of found faces to male faces, or only to people
with glasses. The “Alarm Group” button displays an additional window, where the face database to
be used for the comparison (all available databases are selected by default) can be selected. Any
combination of filters is possible. After configuring all options, press the “Search” button to search
for faces. Found faces will be displayed in the search results presentation window.
2. Comparison settings panel.
The panel allows to configure the options of comparing the found faces with the faces in the
camera database (or in a file). The “Add” button opens a new window that allows to add a face to
the comparison. It is possible to select photos from those captured by the camera or from the
computer disk. After selecting the photo (or photos) in the “Similarity” field, the percentage of
matching faces to be compared with the recognized face can by specified. The higher this
percentage, the greater the similarity of the recognized faces to the pattern. Pressing the
“Compare” button starts the comparison. The percentage of the recognized face matching the
template will be displayed on each photo. Faces, the similarity of which will be less than assumed,
will be removed from the results presentation window.
3. Preview window of face photos selected as the reference for comparison. Clicking on the photo
selects it and pressing the “Delete” button removes it.
4. Search results presentation window. Double clicking on the thumbnail with the left mouse
button starts playback of a fragment of the recording with a given face. Clicking the right button
opens a window with two options: “Play” - starts playback (works in the same way as double-
clicking the left mouse button), and “Quick compare” - allows you to display between the
recognized faces, only belonging to the same person (the face of the person whose quick compare
is enabled, becomes the reference face). Only faces with a match percentage greater than that set in
the “Similarity” field will be displayed as a result of the comparison.

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
12
WWW INTERFACE - „AI PLAYBACK”
“Human & Vehicle Detection” search menu
This menu allows to search for recordings containing objects recognized as persons and/or vehicles.
1. Search settings panel.
The “Start time” and “End time” options allows to set the time range in which the search is to take
place. The “Detection type” option allows to select the type of objects to be searched. This allows user
to narrow search to people or vehicles. It is also possible to combine filters. After configuring all
options, press the “Search” button to search for objects. The search results will be displayed in the
search results presentation window.
2. Search results presentation window. Thumbnails of found objects are displayed. The headers of each
of them show the date of the recognition and the type of object (person or vehicle). Double-clicking
with the left mouse button on a thumbnail starts playback of a fragment of the recording with a given
object.
2
1

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
13
WWW INTERFACE - „AI PLAYBACK”
“PID & LCD” search menu
This menu allows to search for recordings containing recognized persons and/or vehicles registered
during the operation of the Perimeter Intrusion Detection and Line Crossing Detection functions.
1. Search settings panel.
The “Start time” and “End time” options allows to set the time range in which the search is to take
place. The “Vigilance” option allows to select which type of analytics are to be searched for (detection
of a line crossing or perimeter intrusion). The “Detection Type” option allows to select people or
vehicles to search. It is also possible to combine filters. After configuring all options, press the
“Search” button to search for objects. The search results will be displayed in the search results
presentation window.
2. Search results presentation window. Thumbnails of found objects are displayed. The headers of each
of them display the date of the recognition, the type of the recognized object (person or vehicle) and
the abbreviation of the name of the image analysis function that recorded this event. Double clicking
the left mouse button on a thumbnail starts playback of a fragment of the recording with a given
object.
2
1

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
14
“Repeat customer” search menu
This menu allows to search for recordings containing the recognized face of the same person.
1. Search settings panel.
The “Start time” and “End time” options allow to set the time range in which the search is to take
place. The “Minimum time interval” option allows to specify the minimum time, that must elapse
between consecutive recognition of the same face. As a result, repeated recognitions are eliminated
when a person stays in the recognition area for a long time. In the “Similarity” option, the
percentage of facial compatibility (similarity) above which they are treated as belonging to one
person can be set. The “Face Attribute” option allows to select specific facial features to filter your
search results. This allows, for example, to narrow down the group of found faces to male faces, or
only to people with glasses. The “Alarm group” button displays an additional window where the
face database to be used for the comparison (all available databases are selected by default) can be
selected. Any combination of filters is possible. After configuring all options, press the “Search”
button to search for faces. Found faces will be displayed in the search results presentation window.
2. Search results presentation window. It displays thumbnails of faces that have been recognized
multiple times within a certain time period. Above the thumbnail there is the name of the person
with whom the recognized faces were compared, and under the thumbnail - the number of times
the face was recognized. Double-clicking with the left mouse button on a thumbnail displays
thumbnails of all diagnoses of a given person. In turn, double-clicking the left mouse button on
one of these thumbnails starts playback of a fragment of the recording with a given face.
WWW INTERFACE - „AI PLAYBACK”
2
1
3

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
15
3. The table summarizing the data of the recognized face.
After selecting one of the thumbnails in the search results presentation window, the collected
recognition dates for a given face are displayed in the table. Pressing the play button in the
“Playback” column starts playing back a section of the recording with that particular face
recognition. There are additional options above the table to help filter the results better: the
“Minimal number of occurrences” option allows you to narrow down the number of results by
discarding less than the specified repeats, and the “Sort type” option allows to sort the thumbnails
according to the number of diagnoses or time of first recognition. The arrow buttons also let you
sort the results in ascending or descending order. Filtering and sorting changes are applied after
pressing the “Refresh” button.
“Face attendance” search menu
This menu allows you to create and present presence statistics. The statistics show the presence of
people analyzed in a specific time period and at specific times.
1. Search settings panel.
From the “Day” drop-down list, select the statistics time range. Selection options: “Day” - only
one day will be analyzed, “Week” - only one week will be analyzed, “Month” - only one month
will be analyzed, “Customize”- allows to define the time range yourself and “Today”- sets the
current day as data source. For the “Day”, “Week” and “Month” options, pressing the arrows
between the date fields below allows to quickly move to the next or previous period of time,
respectively (by default it is always the current one). Regardless of the selected option, clicking on
the date fields displays a calendar that allows to choose the date freely.
WWW INTERFACE - „AI PLAYBACK”
2
1
3

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
16
The “Import type” drop-down list allows to select the data source: the “By group” option allows to
search from among the faces stored in the databases. By default, all databases are taken into
account (by pressing the “Alarm groups” button, you can select the databases to be searched). The
“By face” option allows to select specific people. After pressing the “Select images” button, a new
window will open in which you can select the people whose statistics are to be searched. After
selecting people's faces, the window closes, and the preview or removal of selected people can be
made after pressing the “Chosen” button. By pressing the button “Select images” again, you can
add people to the group selected earlier. After determining all the criteria, pressing the “Search”
button causes the preparation and display of the statistics.
2. Additional configuration panel for displaying statistics
Above the statistics area, there is an additional configuration panel that allows to set the working
days (by default from Monday to Friday), and the start and end working times. Correctly providing
this data will allow for a graphic presentation of the presence and delays of individual people.
After changing these settings, press the “Refresh” button to update the statistics. The “Export”
button allows you to export the statistics as a CSV file.
3. The area of statistics presentation
The table presents a list of entry and exit statistics for people selected in the settings panel.
Clicking on the selected row displays a graphical representation of the entry and exit times below
the table:
Here, on the timeline, colored lines are marked with the entry and exit times of the selected person:
red means later entering or leaving early, and green - entering and leaving at the appropriate time.
Using the mouse wheel in the timeline area changes the time range displayed.
Clicking on the icon in the “Detail” column will display an additional window with details
of the inputs and outputs of the selected person. The window displays the thumbnails of the faces
captured on entry and exit, along with full frames. The time of the events is also displayed along
with the status. If the person has entered or left several times, the details window will inform you
about it, along with an option to play the video from that moment.
WWW INTERFACE - „AI PLAYBACK”

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
17
3. CAMERA CONFIGURATION - REMOTE SETTING
This menu allows you to modify and configure all parameters and camera settings available in a given
model. Most of the settings can be changed conveniently and safely by selecting a parameter value
from the drop-down list. In the case of fields that allow to enter your own parameter value, an
acceptable range is given.
However, any changes should be made carefully in order not to lose the stream or communication with
the camera.
3.1. “Channels/Video” group of settings
This menu allows to modify image parameters.
3.1.1. “Live” menu
This menu allows to give the camera its own name, turn on and off the display of the camera name and
date, select the video system and configure the display on the OSD screen (you can set the position of
the subtitles by dragging the mouse).
3.1.2. “Image control” menu
This tab allows to modify the image-related settings.
WWW INTERFACE - „CHANNELS/VIDEO”
In some camera menus, the changes you make are saved automatically, but in most of them you
need to remember to click the Save button for the changes to be visible (or applied).
Cameras have a dynamic menu, which means that the content of menu items may change,
depending on previously selected options or settings.

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
18
Basic options - cameras with white light illuminator
“Operating mode” - selection of the operating mode of the camera. Available options are: Full Color
Mode, Day/Night Mode, Schedule.
In the “Full Color Mode” mode, the camera works all the time in the color mode, and depending
on the lighting conditions, the white light illuminator can be turned on. The operating mode of the
white light illuminator is set in the “White light” option: “Manual” (default setting) - the
illuminator turns on automatically depending on the lighting conditions and shines with a constant
power, set with the “Light Distance” slider. “Auto” - the illuminator turns on automatically
depending on the lighting conditions and shines with a variable intensity, depending on the
external lighting. “Schedule” - allows you to set the lighting schedule of the white light
illuminator. “Off” - the illuminator is turned off.
In the “Day/Night Mode” the camera works in color mode, and in low light conditions it switches
to black and white mode and turns on the IR illuminator. The operating mode of the IR illuminator
is set in the “Day/Night Mode” option:
“Auto” - the illuminator turns on automatically depending on the lighting conditions. In this
mode, the delay of day-night and night-day switching is set with the “IR-CUT delay” slider, in
the range from 1 to 36 seconds. The “IR-LED” option allows you to select the working mode of
the IR illuminator: “Manual” (default setting) - the illuminator shines with a constant power, set
with the “Low Beam Light” slider - for IR LEDs with a wide beam angle, suitable for lighting at
a short focal length and “High Beam Light”- for IR LEDs with a narrow beam angle, suitable for
illumination at a long focal length.
“Smart IR” - the illuminator shines with a variable intensity, depending on the external lighting.
“Off” - the illuminator is turned off.
“Day” - the camera works only in the day (color) mode.
“Night” - the camera works only in black and white mode, with the IR illuminator turned on.
“Schedule” - switching between day and night modes is carried out in accordance with the
schedule settings.
In the “Schedule” mode, the camera works in the “Color 24/7” and “Day / night mode”.
Switching between operating modes is carried out in accordance with the schedule settings.
WWW INTERFACE - „CHANNELS/VIDEO”
The “Low Beam Light” and “High Beam Light” adjustments are available depending on the
camera model.

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
19
Basic options - cameras without white light illuminator
“IR-CUT mode “- selection of the operating mode of the IR illuminator. Available options are:
Automatic mode, Color Mode, Black White Mode, Schedule.
In the “Automatic mode” mode, the illuminator turns on automatically depending on the lighting
conditions. In this mode, the delay of day-night and night-day switching is set with the “IR-CUT
delay” slider, in the range from 1 to 36 seconds. The “IR-LED” option allows to select the working
mode of the IR illuminator: “Manual” (default setting) - the illuminator shines with a constant
power, set with the “Low Beam Light” slider - for IR LEDs with a wide beam angle, suitable for
lighting at a short focal length and “High Beam Light”- for IR LEDs with a narrow beam angle,
suitable for illumination at a long focal length.
“Smart IR” - the illuminator shines with a variable intensity, depending on the external lighting.
In the “Color Mode” mode - the camera works only in the day (color) mode.
In the “Black White Mode” mode - the camera works only in black and white mode, with the IR
illuminator turned on.
In the “Schedule” - switching between day and night modes is carried out in accordance with the
schedule settings.
Advanced options
Angle Trad, Mirror - options to modify the displaying of the image
Image Enhancement - menu for selecting one of the image enhancement functions. Available
options: WDR (or DWDR - depending on the model) - enables or disables the WDR (wide dynamic
range) or DWDR (digital wide dynamic range) function, HLC - a function of compensating strong
light sources and automatically balanced their impact on the camera's sensor, Back Light - rear
backgrounds compensation function that eliminates the effect resulting from observing the area
with too strong light source in the background.
White Balance - allows to set way of working a white balance mechanism. Available options:
Automatic mode - the automatics corrects the color balance itself, Manual - after selecting this
option, sliders for manual adjustment of the color components level appear
WWW INTERFACE - „CHANNELS/VIDEO”
The “Low Beam Light” and “High Beam Light” adjustments are available depending on the
camera model.

4000 series IP cameras User manual version 1.4
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
20
Shutter - allows selection of shutter mode. Available options: Automatic mode and Manual. When
set to Manual, an additional drop-down list appears, allowing you to select a specific shutter speed
value.
Time Exposure - function related to the Shutter option has two functions: when the Shutter option
is set to Automatic mode, it specifies the longest shutter speed that the automatic exposure can use.
When the Shutter option is set to Manual, the exposure automatic adopts the selected shutter speed
as a constant.
Defog - feature to improved visibility in bad weather (fog, rain etc). Available options: Off,
Automatic mode, Manual. If you select Manual the slider appears for setting the strength of the
function.
3D Noise Reduction - noise reduction function in low light conditions. There are three operating
modes: Automatic mode - the camera's automatics decide on the activation of the reduction and its
strength, Manual - manual setting of the noise reduction strength with the Level slider and Off -
the digital noise reduction mode is turned off.
3.1.3. “Video Cover” menu
This menu allows to enable up to four privacy zones.
To activate the privacy zone move the Enable slider right, and then select part of an image to hide, by
setting the red rectangle of an appropriate size (this is done by dragging on the preview window with
the left mouse button pressed). After setting all privacy zones save the changes.
When set, privacy zones can be modified at any time. To do this, select the zone to be modified by
clicking the left mouse button (on the zone yellow frame will appear). Then, selected zone can be
moved to another location by dragging it, can be resized by grasping the edge of the zone and setting as
needed, or can by deleted by clicking on the Delete button.
WWW INTERFACE - „CHANNELS/VIDEO”