now! DRIVE User manual

DRIVE and 0-DRIVE
Binding Manual
Now_Drive_O-Drive_Manual_2014.indd 1 3/17/14 6:43 PM

Thanks for purchasing Now bindings. This is
the revolutionary snowboard binding design
inspired by the dynamics of a skateboard
truck. These bindings will provide unparalleled
performance and comfort if properly set up.
To get the most out of your bindings, please
take the time to read over this manual to learn
how to customize them to suit your needs
and style.
*Phillips #3 screwdriver needed for binding installation.
x8 x8 x8
x2 x1
x2
Now_Drive_O-Drive_Manual_2014.indd 2-3 3/17/14 6:43 PM

Opening the Foot Pillow
To open your Foot Pillow, grab the soft EVA pad at the heel and
pull upward. Carefully read the instructions provided on the disc
cover before mounting your bindings onto your board.
Hole Patterns and EST Configuration
IMPORTANT: Note the direction that the arrows are pointing on
the washers.
4-HOLE
PATTERN
Arrows on
washers must
point towards
the squares.
3-HOLE PATTERN:
Arrows on washers must point towards the triangles.
EST/CHANNEL
No washers needed.
Now_Drive_O-Drive_Manual_2014.indd 4-5 3/17/14 6:43 PM

Disc Orientation Options
Boot Size Adjustment
toe
heel
Stance Width Adjustment
toe
heel
Toe and Heel Boot Size Adjustment Chart
All snowboard boots are not alike, so please check your settings and make
sure that your boot is centered across your board.
Boot Size 7
Boot Size 10
Boot Size 8
Boot Size 11
MEDIUM BINDING:
LARGE BINDING:
Boot Size 10
Boot Size 12+
toe
toe
toe
toe
toe
toe
heel
heel
heel
heel
heel
heel
Now_Drive_O-Drive_Manual_2014.indd 6-7 3/17/14 6:43 PM

Straps Adjustments
To adjust, simply open the tool-free NOW lever. Unscrew it,
move straps to desired location, tighten, and close the tool-free
NOW lever.
OPEN LEVER
MOVE STRAP
UNSCREW
Toe Strap Placement
The toe cap strap is designed to be positioned and centered
at the tip of your boots. To adjust please follow the same
instructions as straps adjustments on previous page.
TIGHTEN &
CLOSE LEVER
Now_Drive_O-Drive_Manual_2014.indd 8-9 3/17/14 6:43 PM

FlipIt Straps Instructions
Step 1: Lift the tool-free
NOW lever.
Step 2: Unscrew the tool-
free NOW lever. Remove
the ankle straps. Flip it
around and switch it to the
other binding.
UPWARD
Strap Support Setting
FLIPIT STRAPS
FlipIt Straps
Flip It Straps allow you to interchange your ankle straps
between your left and right binding to create a customized
riding experience. Ride with your ankle straps in the “upward”
position for added lateral support and board response or flip it
into the “downward” position for solid heel support and more
tweaking ability.
DOWNWARD
Strap Support Setting
Now_Drive_O-Drive_Manual_2014.indd 10-11 3/17/14 6:43 PM

NoBack mode with
HighCups.
Step 1: Remove highback
by removing hardware on
both sides with a phillips
#3 and a 4mm allen key.
Step 2: Replace HighBack
with HighCup and re-
instal the hardware. Note:
make sure that the t-nuts
are properly fitted in the
binding cavity and use a
4mm allen key to hold the
t-nuts in their place.
HIGHCUP
Forward Lean Adjustment
To change your forward lean, simply pull down the lever and
move the forward lean block either up or down. When you
reach the desired position, simply flip the lever back to the
locked position.
Now_Drive_O-Drive_Manual_2014.indd 12-13 3/17/14 6:43 PM

Closing the Foot Pillow
To close the foot pillow, simply push down on the EVA while the
other hand is on the heelcup pulling upwards. You will hear a
CLICK on both sides when the foot pillow is properly closed.
Custom Bushing Options
Now Drive and 0-Drive bindings come assembled with either the
Medium or the Hard bushings. These bushings can be changed
depending on your style of riding, snow conditions, weight or
personal preference. To remove the bushings simply pop them
out with your finger. Toe and heel bushings are different, so check
the underside label before installing.
IMPORTANT: Drive and O-Drive bindings are sold with the
Medium and Hard bushings only, for more bushing options please
visit the NOW online store or go to a NOW authorized dealer.
SOFT (45 shore)
MEDIUM (50 shore)
HARD (60 shore)
*Three Bushing Densities
*Sold with Medium and Hard Bushings
TOE
HEEL
Now_Drive_O-Drive_Manual_2014.indd 14-15 3/17/14 6:43 PM

Warranty
Now Snowboarding offers to the original purchaser a lifetime
warranty on the baseplate components (Hanger, Alumi-ring and
forge disc), along with a one year limited warranty on all other
parts. This warranty is not transferable, and Now reserves the
right to repair or replace the faulty parts at its own discretion.
For more information visit our warranty policy at:
now-snowboarding.com
What is “Skate-Tech”? Inspired by how easily and efficiently a
skateboard turns; major components of our system mimic both
the function and description of skateboard trucks. The ‘Hanger’
powerfully transfers energy input from the straps to the
bushings and onto the edges of your board. The Kingpin acts as
a fulcrum, magnifying this energy through leverage. Traditional
bindings diminish energy transfer by the flexing and bending of
their baseplate, forcing you to crank your straps down harder,
ride with more forward lean, or run taller and stiffer highbacks.
This all leads to more foot fatigue and pain. NOW bindings
bypass the middle of the snowboard and direct your energy
right onto the board’s edges. They simply transfer more power
to the board with less work, meaning your feet will stay more
relaxed and comfortable, longer.
Now_Drive_O-Drive_Manual_2014.indd 16-17 3/17/14 6:43 PM

Twitter: @nowbindings
Instagram: @nowbindings
Facebook:/nowsnowboarding
www.now-snowboarding.com
RIDERS, BE ADVISED: Snowboarding is a hazardous sport,
which can result in serious injury or death to yourself or others.
Use these Now bindings at your own risk. Check and tighten
hardware before each use. Use only snowboard specific boots.
Read this instruction manual when installing your Now bindings
and before use. This binding does not release on impact. A
runaway snowboard is a dangerous object and it can cause
serious injuries or death – you are responsible so be aware. In
compliance with ISO code 14573, you are required to wear a
leash at all times. The leash must be attached to your bindings
baseplate and securely fastened to your body.
Now_Drive_O-Drive_Manual_2014.indd 18-19 3/17/14 6:43 PM

RETHINK
YOUR RIDE
Now_Drive_O-Drive_Manual_2014.indd 20 3/17/14 6:43 PM