nox HUMMER NEXUS User manual

HIGH PERFORMANCE DELUXE CHASSIS
INSTALLATION GUIDE

Chassis size type:
MB form factor:
External drive bays:
Hidden drive bays:
Cooling system:
Expansion slots:
Material:
Dimensions:
Color:
PSU:
Clearance:
Water cooling
option:
Ports:
Extra wide tower
E-ATX, ATX, M-ATX, ITX
--
2x 3.5’’; 2x 2.5’’
• Front: 3x 120/140 mm (120mm included)
• Rear: 1x 120/140 mm (120mm included)
• Top: 3x 120/140 mm (not included)
• Bottom: 2x 120 mm (not included)
7
•0.8mm SPCC steel chassis
•Tempered glass side panel
•Metal and plastic front panel
448 x 233 x 493 mm (H x W x D)
Black
ATX standard compatible (not included) - 235mm max
• CPU cooler: 180 mm (max height)
• VGA: 400 mm (max lenght)
• Front: 320 mm
• Rear: 120 mm
• Top: 340 mm
• Side: 240 mm
1x USB 3.0; 1x USB 2.0; HD audio; 1x TYPE-C
SPECIFICATIONS

A: Accesory bad
B: Cable
C: I/O port
D: Six angle pictures
E: Panel disassembly
F: Power supply installation
G: Motherboard installation
H: VGA card installation
I: Fan installation
J: SSD/HDD installation
K: VGA holder installation
HIGH PERFORMANCE DELUXE CHASSIS

Side panel disassembly: open the
side panel as picture.
Side panel disassembly: pull left glass to 90º or
more and the lift up.

Side panel disassembly: pull right side to 90º or
more and the lift up.
Disassemble front bezel: Put your hand at the bottom and pull it forward.

Place the motherboard inside as shown, align the
screw holes and tighten the screws.
Caution!! Fix the stand before assembling the motherboard.

Untie the screws as shown in the picture to separate HDD bay.
You can install HDD or SDD on top of bracket.

Mount the SSD or HDD on bracket.
Mount the bracket with the HDD/SDD inside the chassis as shown.

Instal the VGA card holder as shown.