NPG DSTR 4010A User manual

User´s Manual
User´s Manual
DSTR 4010A
DSTR 4010A
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:52 Página 1

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
Contenido
Contenido
Installation 6
Main Features 2
For your Safety 3
Unpacking 4
General Operation 4
R U 5
Menu Information 8
Main Menul 8
1.Channel List 9
1.1 TV hannel List 9
1.2 Radio hannel List 12
1.3 Delete All 12
2.Installation 12
2.1 Antenna onnection
2.2 Satellite List 12
2.3 Antenna Setup 14
2.4 Single Satellite Search 16
2.5 Multi Satellite Search 16
2.6 TP List 17
2.7 Terrestrial Automatic Scan 18
2.8 Terrestrial Manual Scan 18
3.System Setup 19
3.1 Language 19
3.2 TV System 19
3.3 Local Time setting 19
3.4 Timer Setting 20
3.5 Parental ontrol 21
3.6 OSD Setting 21
3.7 Favorite 21
3.8 Other 22
4.Tools 22
4.1 Information 22
4.2 Factory Setting 22
4.3 Upgrade by USB 23
4.4 USB 23
5.Game 24
6.REC 24
6.1 Record Managager 24
6.2 PVR Setting 25
6.3 HDD Information 25
7.Hot key 25-27
Trouble Shooting 29-30
General Information 2
1
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:52 Página 2

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
General Information
General Information
A Digital Satellite&Terrestrial Receiver is a convenient product that allows you to
view a variety of programs provided through satellite or terrestrial antenna. This
user's guide covers the installation of the receiver and the necessary steps to
implement various features. This also explains special features available only in this
receiver in detail, which will allow you to make full of these feature.
Information confirmed in this document is subject to change. We reserves the right,
without notice, to make change in product design or performances as progress in
engineering or technology.
Main Features
MPEG-2 digital & fully DVB-S and DVB-T compliant
S P and M P receivable from /Ku band satellite
Automatic PAL/NTS conversion
4000 channels TV and Radio programmable
32 different favorite groups selection
On Screen Display with multi-language
Fully support to 7 days Electronic Program Guide(EPG)
Picture in Graphics(PIG) support
256 colors On Screen Display
DiSEq 1.0/1.1/1.2/1.3 fully support, 13/18V, 0/22K
Various channel editing function(favorite, move, lock, rename and sort)Parental control
for channels
Easy to use Menu System
Software upgrades through RS232 port , Receiver to receiver, and USB upgrade
Automatic turn on/off by Timer setting(multiple options)
Subtitle support DVB EN300743 and EBU
Teletext support DVB ETS300472 by VBI and OSD
Automatic save for last channel
hannel list can be sorted by alphabetic A-Z
Up to 3X3 pictures on screen, only 1 active
Video zoom function with 1/2/4/6/8/12/16 ratio
Supprot FAT16/FAT32/FAT12
Only list JPEG/BMP files
Default 2 hours, user can setting the end time
Based on size of HDD, 512M~8G size will reserve for time shifted recording
Lock/Delete/Rename,Preview playback, Browse record files information
Play/Pause/Stop/Step
Fast Forward/Fast Backward 2/4/8/16/24, Slow Forward/Slow Backward 1/2, 1/4, 1/8,
Jump to user selected time point
2
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:52 Página 3

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
For Your Safety
General Information
General Information
To avoid electric-shock hazards,
do not open the cabinet, refer ser-
vicing to qualified personnel only.
Keep the receiver away from flower
vases, tubs, sinks, etc., in order to
avoid damaging the equipment.
Do not expose the receiver un-der
the sunlight. And keep it away
from the heat source.
Do not block ventilation holes of
the Receiver so that air can circu-
late freely.
When the abnormal phenomenon
occur, you should cut off the power
immediately.
Do not touch the receiver during
thunder, since that might create
electric-shock hazards.
Switch the receiver off whenever it re-
mains out of service for an extended
period.
Be sure to unplug the receiver before
cleaning. Use only a dry cloth to clean.
3
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:52 Página 4

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
General Information
General Information
Unpacking
1. Remote ontrol 2. Batteries 3.User´s Manual
General Operation
Throughout this manual you will notice that the everyday operation of the receiver is
based on a series of user friendly on screen display and menus. These menus will
help you get the most from your receiver, guiding you through installation, channel
organizing, viewing and many other functions.
All function can be carried out using the buttons on the R U, and some of the
function can also be carried out using the buttons on the front panel.
The receiver is easy to use, always at your command and adaptable for future
advances.
Please be aware that new software may change the functionality of the receiver.
Should you experience any difficulties with the operation of your receiver, please
consult the relevant section of this manual, including the Problem Shooting, or
alternatively call your dealer or a customer service adviser.
4
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:53 Página 5

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
Información General
Información General
EY FUNCTION
Turns power ON/OFF of the DSR
When watching a channel, mute the sound
Enter number of the required menu item or select a channel-
number to watch
Switches between TV and Radio mode
Switches back to previous channel
Displays the favorite group list
Timeshift function key
Display the Find window
Show information of the current channel
Press this key one time to run menu onscreen
Moves up / down a page in the list
Executes the selected item in the menu screen
or enters the desired value in any input mode
When watching a channel, change channels or
move to the next higher or lower item in the menu
When watching a channel, adjust the volume or
move to the left or right item in the menu
Return to the previous menu on the menu
screen or escape from the menu
all up the EPG (Electronic Program Guide)
Display the Audio window.
Switch between TV and AV modes
Switch to teletext or subtitle mode
Enter into the zoom in mode
Press once to pause the screen picture, press
once again to go to the normal mode
Enter into the sleep in mode
Enter into the nine-pictures mode displayed
on the screen.
Record the program
Play and stop the program
Press to fast forward or fast backward
Press to slow forward or slow backward
Remote Control
5
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:53 Página 6

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
Installation
Installation
Rear Panel
Connecting to TV using SCART support
LNB IN: onnect to satellite antenna
ANT IN: onnect to antenna
RF IN: onnect to cable singal
RF OUT: onnect to TV ANT INPUT
onnect to a pc
for s/w upgrade
onnect to a digital amplifier
onnect to tv/vcr using a scart cable
onnect to usb device
LOOP: onnect to another receiver
LNB OUT: onnect to the other receiver
onnect video to TV using R A jack
onnect to audio R/L to TV or audio tuner
Power on/off
TV
V R
Satellite Dish
Terrestrial
Antenna
able or
OFF-Air Antenna
6
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:53 Página 7

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
Installation
Installation
Connecting to TV using RCA support
Connecting to Digital Amplifier
Satellite Dish
Terrestrial Antenna
TV
TV
Digital audio
convertor or
amplifier
Speaker
Satellite Dish
Terrestrial Antenna
7
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:53 Página 8

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
During the installation the O key confirms a selection and LIST key shows Down List
Box
if the column has 34 mark. You can also use the numeric keys on the R U to enter
numeric value.
Use the PR+, PR- key to move upwards and downwards from one line to another line and
use key to move from main menu to sub menu and move from left side to right side
or versa.
Meantime, you want to escape the menu system, please press MENU or EXIT key on the
R U.
If there is no program, you can not exit from the Main Menu window by pressing
MENU or EXIT key. System will inform "No channel" and the following items turn grey.
Menu Information
Menu Information
Main Menu
Make sure that you have properly installed and connected the cables of the receiver
well. If the receiver is the factory status or there is no program list, when power on,
the Main Menu window will be displayed on the screen.
During the normal TV/Radio mode, press MENU key on the R U to enter into the
Main Menu window.
This menu consists of 6 major main menus as follow.
- Edit Channel
- Installation
- System Setup
- Tools
- Game
- REC
8
Sub-menu Turn grey when there is no program
Channel List TV hannel List
Radio hannel List
Delete all
Installation Antenna onnection Satellite List
Antenna Setup Single Satellite Search
Multi Satellite Search TP List
System Setup Language TV System
Local Time Setting Timer Setting
Parental Lock OSD Setting
Favorite Other
Terrestrial Automatic Scan
Terrestrial Manual Scan
Tools Information Factory Setting
Upgrade by USB USB
Game Tetris Othello Sudoku
REC Record Manager HHD Information
PVR Setting
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:53 Página 9

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
1. Edit Channel
1. Press O key or key to pop up the "Input
Password" dialogue, you can not enter into the
menu unless the correct password is inputted. The
default password is "0000".
2. Press PR+, PR- keys to move the cursor up or
down.
3. Press EXIT key or key to move the focus to
the left menu.
1.1 TV Channel List
1. Press keys to select satellite.
2. Press PR+, PR- keys to select the program that
you want to play, and then press O key to view it
in the small window. If move the yellow cursor to
select up or down, you will see a gray line which
indicates the playing program in the small window.
3. Press FAV key to move the FAV button upward.
Select the program and press O key to pop up
the favourite group list. In the list, select the group
that you want to add into and press O key, and
then you will find the favourite mark is displayed
at the right side of the selected program.
Press FAV key again to exit from the fav mode,
and you will find the FAV button return to the origin
position.
4. Press red colour key to move the Lock button
upward. Select the program and press O key to
mark this program with the Lock mark. You can
cancel this mark by pressing O key once more.
Press red colour key again to exit from the lock
mode, and you will find the Lock button return to
the origin position.
9
Menu Information
Menu Information
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:53 Página 10

Menu Information
Menu Information
5. Press green colour key to move the Skip button
upward. Select the program and press O key to
mark this program with the skip mark. You can
cancel this mark by pressing O key once more.
Press green colour key again to exit from the skip
mode, and you will find the Skip button return to
the origin position.
6. Press yellow colour key to move the Move
button upward. Select the program and press O
key to mark this program with the move mark.
Press PR+, PR- keys to move the cursor to the
position where you want to locate and press O
key to confirm.
Press yellow colour key again to exit from the
yellow mode, and you will find the yellow button
return to the origin position.
7. Press blue colour key to enter into the Edit
channel window.
i . Sort (red colour key)
Press red colour key to pop up the Sort drop-down
list.
Name(A-Z): The ascending order, omitting the $
character, the number is ahead, then the capital
letter, at last the lowercase.
Name (Z-A): The opposite order of the above Name
(A-Z).
Free/Scramble: All FTA programs are listed ahead,
while all scrambled programs are listed last.
Lock: all locked programs are listed at the last.
User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
10
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:53 Página 11

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
Menu Information
Menu Information
ii. Edit (green colour key)
Press green colour key to move the Edit button
upward. Select the program and press O key to
pop up the Rename window.
In Rename window, press red colour key to switch
between capital letter and lower letter; press green
colour key to delete the character on the cursor;
press keys to move the cursor left or right;
press numeric keys (0-9) to input the character,
please refer to the down table. Press yellow colour
key to save and exit, or press blue key to cancel
and exit
Numeric keys Press numeric key repeatedly, display in circle
1.,*?!@1
2AB 2
3DEF3
4GHI4
5JKL5
6MNO6
7PQRS7
8TUV8
9WXYZ9
0[space]_-0
iii. Delete (blue colour key)
In Delete window, press blue colour key to move the
Delete button upward. Select the program and press
O key to mark this program with the deletion mark.
You can cancel this mark by pressing O key again.
Press EXIT key to pop up the dialogue "Are you sure
to save?". Select Yes button and press O key to
save, or select NO button and press O key to exit
without saving.
If the name is empty, system will pop up a dialogue informing "Name" once yellow colour key is
pressed. Press O key to close this dialogue.
11
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:53 Página 12

2.2 Satellite List
1. Press PR+, PR- keys to select the satellite up or
down. Press O key to select and mark, and you
can press O key again to cancel the selection and
the mark.
Menu Information
Menu Information
User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
1.2 Radio Channel List
Sine the same operation as 1.1 TV Channel List, here we don't explain any more.
1.3 Delete All
Move cursor to the Delete All item, and press O
Key to pop up the dialogue "Warning! Do you really
want to delete all channel?".
Press EXIT key to pop up the dialogue "Are you sure
to save?". Select Yes button and press O key to
save, or select NO button and press O key to exit
without saving.
2. Installation
1. Press O key or key to pop up the "Input
Password" dialogue, you can not enter into the
menu unless the correct password is inputted. The
default password is "0000".
2. Press PR+, PR- keys to move the cursor up or down.
3. Press EXIT key or key to move the focus to the left
menu.
2.1 Antenna Connection
Press keys to select between Motor Antenna
and Fixed Antenna.
12
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:53 Página 13

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
Menu Information
Menu Information
2. If there is no satellite, the red colour and blue
colour keys will be invalid.
3. Press red colour key to pop up the Edit Satellite
window. Press PR+, PR- keys to move cursor up or
down.
Name: User numeric keys to change the name of
the satellite, please refer to the Edit Channel Name.
Longitude: You can press keys to switch
between east longitude and west longitude. After
pressing O key, you can use numeric keys to edit
the longitude, press EXIT key or the PR+, PR- keys to
exit editing mode. The range
of the longitude is from 1to 180 degree. If beyond this
range, system will inform you
"out of range" when you press yellow colour key on the
R U.
After setting, press yellow colour key to save and exit, while press blue colour key
to exit without saving
4. Press green colour key to pop up the Add
Satellite window. Since the same operation as the
above Edit Satellite window, here we don't explain
any more.
5. Press blue colour key to pop up the dialogue "Are
you sure to delete?". Select Yes button and press
O key to delete the selected satellite. You can
cancel this operation by pressing O key at the NO
button.
13
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:53 Página 14

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
14
Menu Information
Menu Information
2.3 Antenna Setup
Part A: Fixed
Suppose that you have selected Fixed Antenna in
the Antenna Connection window.
1. Satellite: All selected satellites in the satellite
list are displayed in this item.
Press keys to select the satellite in circle. Or
press O key to pop up the drop-down list, then
select the desired satellite in the list and press O
key to confirm.
2. LNB Freq, Transponder, DiSEqC1.0, DiSEqC1.1: The same operation as the above.
3. 22 , 0/12V, Polarity: You can press keys to select in circle.
Part B: Motor
Suppose that you have selected Moter Antenna in the
Antenna onnection window.
1. LNB Type: Select the proper LNB type.
2. Motor Type: Select between DiSEq 1.2 and
USALS. If you select DiSEq 1.2, the following Local
Longitude and Local Latitude items will turn grey.
3. Delete All: Press OK key to pop up the dialogue
"Are you sure to clear set satellite position of this
tuner?". Press OK key at the Yes button to clear all
the memories about the position of the satellites that
has connected to the current turner.
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:53 Página 15

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
Menu Information
Menu Information
4. Motor Setting: Press O key to the Motor
Setting window.
Satellite: Press keys to select the satellite in
circle. Or press O key to pop up the drop-down list,
then select the desired satellite in the list and press
O key to confirm.
Transponder: The same operation as the above.
Position No., & Save: The range is from 0 to 63. "0"
delegates the original position.
You can select the proper value when you has rotated the antenna.
Go to X: Press O key to pop up the drop-down list, select the proper position
(reference or from 1to 63) to realize the selected position.
West <Save> East: Press key to turn west, while press key to turn east.
Press O key to pop up the dialogue "Are you sure to change this satellite's
position?". Press O key at the Yes button to save the current position, or press O
key at the No button to cancel the operation.
Recalculation: Press O key to pop up the dialogue "Are you sure to change this
satellite's position?". Press O key at the Yes button to recalculation
.
5. Limit Setup: Press O key to pop up the Limit
Setup window.
Limit Setup: Press keys to switch among
Disable Limit, East Limit and West Limit.
Limit Setup: Move cursor to the Limit Setup button.
You can press key to turn west , or press key
to turn east.
Go to Reference: Press O key to go to reference. If
you select Disable Limit in the
above Limit Setup item, this button will turn grey.
6. If select USALS, Delete All item will turn grey.
Local Longitude, Local Latitude: Press keys
to switch between West and East, or
press keys to switch between North and
South. Press O key to enter into the editing mode.
Use numeric keys (0-9) to input the longitude or
latitude, press MENU key or EXIT key to exit. The
range of the longitude is from 0 to 180,while the range
of the latitude is from 0 to 90. If the inputted value is
not in this range, system will pop up a dialogue "Out of Range" when exit from this window.
You can press O key to close this dialogue.
15
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:53 Página 16

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
Menu Information
Menu Information
2.4 Single Satellite Search
1. Satellite : Press keys to select the satellite
in circle. Or press O key to pop up the drop-down
list, then select the desired satellite in the list and
press OK key to confirm.
2. FTA Only: Press keys to select between
Yes and No.
3. Scan Channel: Press keys to select
among TV+Radio, TV hannel, Radio.
Press keys to select the satellite
in circle. Or press O key to pop up the drop-down
list, then select the desired satellite in the list and
press O key to confirm.
4. Network Search: Select between No and Yes.
This item turns grey when Auto Scan is selected in
the following Scan mode item.
5. Scan Mode: Press keys to select between
Auto Scan and Preset Scan. Auto Scan is Blind scan,
while Preset Scan is to search the preset
frequencies.
6. Search: Press O key to start searching.
16
2.5 Multi Satellite Search
From the Multi Satellite Search window, you can
search several satellites at the one time.
1. Satellite: All selected satellites in the satellite list
window are displayed on the down part. You can
press keys to switch among them.
2. FTA Only: Press keys to select between Yes
and number
3. Scan Channel: Press keys to select among
TV+Radio, TV hannel, Radio.
4. Network Search: Select between No and Yes. This item turns grey when Auto
Scan is selected in the following Scan mode item.
5. Scan Mode: Press keys to select between Auto Scan and Preset Scan.
Auto Scan is Blind scan, while Preset Scan is to search the preset frequencies.
6. Search: Press O key to start searching.
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:53 Página 17

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
Menu Information
Menu Information
2.6 TP List
1. Press PR+,PR- keys to select the proper satellite.
2. Press red colour key to pop up the Edit TP
window
Frequency, Symbol rate: Press keys to add
or reduce by step one. Or press numeric keys (0-9)
to input the desired value. The range of the
frequency is 3000-13450, while the range of the
symbol rate is 1000~45000. The inputted value is
beyond this range, the value will return to the origin
value.
Polarity: Press keys to switch between
Vertical and Horizontal.
3. Press green colour key to pop up the Add TP
window. Since the same operation as the above
Edit TP window, here we don't explain any more.
4. Press yellow colour key to pop up dialogue " Are
you sure to delete?". Press O key at the Yes button
to delete the selected TP, or press EXIT key to cancel
the operation.
17
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:53 Página 18

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
Menu Information
Menu Information
5. Press blue colour key to pop up the TP Search
window.
FTA only, Scan Channel, Network Search: Press
keys to select the proper option.
Press OK key at the OK button to start searching.
2.7 Terrestrial Automatic Scan
1. Area: Select the area.
2. FTA Only: Select between YES and No.
3. Search: Press O key to start searching.
18
2.8 Terrestrial Manual Scan
When you enter Manual Search, the screen will
display as beside.
There are two scan modes for you. You can choose to
scan by channel or by frequency.
When scan band is UHF and region is “Spain”, the
range of h Number is from 22 to 69. When scan
band is VHF and region is “Spain”, the range of h
Number is from 1 to 12. (It’s according to region.)
When you complete your configuration, move highlight to search option, and press
[OK] key to start scanning.
Press [EXIT] key to exit the scanning and save the current parameters.
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:53 Página 19

User´s Manual DSTR 4010A
User´s Manual DSTR 4010A
Menu Information
Menu Information
3. System Setup
1. Press O key or key to move the cursor to the
right menu.
2. Press PR+, PR- keys to move the cursor up or
down.
3. Press EXIT key or key to move the focus to
the left menu
19
3.1 Language
1. Press O key to enter into the Language window.
Press keys to select the language in circle,
while press PR+, PR- keys to move the cursor up or
down in circle.
2. Press MENU key or EXIT key to save and exit.
3. The types of the language, pleaser refer to the
configuration of the customer.
3.2 TV System
Press PR+, PR- key to move the cursor up or down,
while press keys to change the setting and the
setting will take effect immediately
1. Display Mode: Select among Auto,PAL, PAL-M,
PAL-N, NTS .
2. Aspect Mode: Select among 4:3LetterBox,
4:3PanScan, 16:9.
3. Video Output: Select between RGB and VBS.
3.3 Local Time Setting
1. Summer Time: Select between ON and OFF. "OFF" delegates the normal time.
If select ON, time will add one hour.
Manual_Vers. ENG_Rev.1:Maquetación 1 23/11/2009 12:53 Página 20