NPG DTR 1002S PRO User manual

DTR 1002S PRO
DIGITAL TERRESTRIAL RECEIVER
User´s Manual

NPG DTR 1002S PRO V2.3
- 1 -
CONTENTS……………………………………………………………………….………………………………………¡ERROR!
MARCADOR NO DEFINIDO.
1. IMPORTANT SAFETY INSTRUCTIONS……………………………………………………………....…………..2
2. CONTENTS AND EQUIPMENT…………………………………………………………………………………….4
2.1 REMOTE CONTROL…………………………………………………….…….……………….………………...6
2.2 CONNECTIONS AND PREPARATION ................................................................................................ 7
3. BASIC FUNCTIONS……………………………………………………………………………………………..…..9
3.1 ENTER INTO SYSTEM AND POWER ON-OFF…………………………………..…………………….......................- 9-
3.2 TV/RADIO PROGRAMS SWITCH……...…………………………………………………………………………..-10 -
3.3 STATION SWITCH…………………………………………………………….………………………………..…….-10 -
3.4 DISPLAY INFORMATION OF PROGRAMS………………………………………………………….……….………...-11 -
3.5 PROGRAM RETURN…………………………………………….……………………………………….………….-11 -
3.6AUDIO LANGUAGE SWITCHAND L/R CHANNEL SWITCH……………………..………………………….………....-11 -
3.7 ELECTRONIC PROGRAMS GUIDE(EPG)…………………………………………………………………………. -12 -
3.8 TELETEXT…………………………………………………………………………………………………………-13 -
3.9 SUBTITLE………………………….………………………….…………………………….……………………….-13 -
4 DIGITAL TV…………………………………………………………………………………………………………..- 14 -
4.1 INSTALLATION………………………………………………………………………………………………….14
4.1.1 Manual Search……………………………………………………………………………………………...- 15 -
4.1.2 Auto Search…………………….…………………………….………………………………….……………15
4.2 CHANNEL MANAGER………….………………………………………….………………..…………………………15
4.2.1 Channel Organizer....……….………………….……………………………………….…………….………- 15 -
4.2.2 Channel Sorting…………………………………………….……………………………………….….…….- 16 -
4.2.3 Channel Grouping....…………………………………………………………………………….………….- 16 -
4.2.4 Edit Channel…………………………………………………………………………………….…………..- 17 -
4.2.5 Delete All………….………….……….……………………………………….………………………………- 18 -
4.3 CONFIGURATION....……………….…………….…….…………….………………………….….…………..………...19
4.3.1 OSD………………………………………………………………………………….…………..…………..19
4.3.2 TV………….…………………….………………………………………………….……..…………...………..- 20 -
4.3.2.1 Display Mode…….………….………………………………………….………….…………………….- 20 -
4.3.2.2 Aspect Ratio……………………………………………………...……………………………………- 20 -
4.3.2.3 Video Output…………………………………………………………..…………………….…………- 20 -
4.3.2.4 Brightness…………………….……………………………………………….…………….…….……..- 21 -
4.3.2.5 Contrast………….………….………………………………………………….…………………………....- 21 -
4.3.2.6 HUE………………………………………………………………………………….….………………- 21 -
4.3.2.7 Saturation………………………………………………………………………………….……………- 22 -
4.3.3 System Setup…………………………………………………………………………..……….…………..- 22 -
4.3.4 Time…………………………………………………………………………………………………….….....- 23 -
4.3.5 Wakeup Timer……………………………………………………………………………..………………..23
4.3.6 Parental Lock………………………….………………….…………………….…………..……….………....- 23 -
4.4 SOFTWARE UPGRADE…………………………………………….……………………………………..……….....-24 -
4.5 VERSION………………………….……………………….……………………...……………………………..24
4.6 FACTORY DEFAULT………..………………………………………………………………………………………24
5 GAMES………………………………………………………………………………………………………….….…24
6 TROUBLESHOOTING……………………………………………………………………….………..…….………25
7 GLOSARY OF TERMS ............................................................................................................................... 26
8 CARACTERISTIC……… ............................................................................................................................. 27

NPG DTR 1002S PRO V2.3
- 2 -
1. IMPORTANT SAFETY INSTRUCTIONS
WARNING
●TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PRESENT BLADE EXPOSURE.
●TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
●TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT FULLY
INSERTED.
This appliance
shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases
shall be placed on apparatus.
1. Read Instructions-All the safetyand operating instructions should be read before the appliance is

NPG DTR 1002S PRO V2.3
- 3 -
operated.
2. Retain Instructions-The safety and operating instructions should be retained for future reference
.
3. Heed Warnings-All warnings on the appliance and in the operating instructions should be
adhered to .
4. Follow Instructions-All operating and use instructions should be followed .
5. Water and Moisture-The appliance should not be used near water.
6. Ventilation-The appliance should be well situated that its location or position does not interfere
with its proper ventilation.
7. Heat-The appliance should be situated away from heat sources such as radiators, heat registers,
stoves that produce heat.
8. Power Sources-The appliance should be connected to a power supply only of the type described
in the operating instructions or as marked on the appliance.
9. Grounding or Polarization-Precautions should be taken.
10. Power -Cord Protection -Power supply cord should be routed so they are not likely to be walked
on or pinched by item placed upon or against them, pay plugs ,and the point where they exit from the
appliance.
11. Cleaning -The appliance should be cleaned only by ways recommended by the manufacturer .
12. Power Plug-Where the MAINS plug or an appliance coupler is used ad the disconnect device,
the disconnect device shall remain readily operable .
13. Power Lines -An outdoor antenna should be located away from power lines .
14. Outdoor Antenna Grounding-If an outside is connected to the receiver be sure the antenna
system is grounded so as to provide protection against voltage surges and to build up static charges.
15. Non-use Periods -The power cord of the appliance should be unplugged from the outlet when
left unused for a long period of time .
16. Object and Liquid Entry -Care should be taken so that objects do not fall and liquids are not
spilled ,into the enclosure through openings . The apparatus shall not be expose to dripping or
splashing and that no objects filled with liquids, such as vases , shall be placed on the apparatus.
17. Conditions Requiring Service -The Appliance should be serviced by qualified service
personnel when:
●The power-supply cord or the plug has been into the appliance.
●Objects have fallen or liquid has been spilled into the appliance.
●The appliance has been expose rain.
●The appliance does not appear to operate normally or exhibit a marked change in performance.

NPG DTR 1002S PRO V2.3
- 4 -
2. CONTENTS AND EQUIPMENT
Package Contents
1. DVB Product DTR 1002S PRO
2. Remote control DVB RECEIVER ( include 2 batteries Remote control x 1)
3. 2 batteries,1.5V ,"AAA" type
4. Operation manual
Using the remote control
Unless stated otherwise , the remote control can operate all features of the DVB Product. Always
point the remote control directly at the remote sensor on the front of the DVB Product, not the TV.
Before you begin
Refer to the manuals of your TV , stereo, or other equipment as necessary .Note the style of jacks
and connectors on the equipment .Determine how to choose different audio and video in channels
on your other equipment so you can and hear the DVB Product working on the TV, stereo ,etc.
You only need two audio connection and one video connection between the DVB Product and your
TV.So you might not use all the jacks on the DVB Product.
Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only
after you have finished hooking up everything. Never make or change connections with equipment
connected to the power outlet.
DTR 1002S PRO
Remote control X1
2 batteries 1.5V "AAA"
Operation manual X1

NPG DTR 1002S PRO V2.3
- 5 -
Front Panel
Real Panel
1. ANT IN Income marks them of antenna.
2. Exited LOOP OUT passing marks them of antenna towards the TV.
3. SPDIF Digital audio optical output.
4. Taken VCR SCART audio/video SCART for the videoregistrazione.
5. Exited TV SCART audio/video SCART for the connection to screen TV.
6. CABLE FEEDING Cable integrated for the connection to taken of net electrical worker 230 Volt
AC, 50Hz.
7. Taken RS232 given serial RS232 (classified to the technical attendance).
8. Power Buttton ON/OFF
1 Menú
2 Display 4 LEDS
3 CH- / CH + ( channels search manual )
Decoder

NPG DTR 1002S PRO V2.3
- 6 -
2.1 REMOTE CONTROL
1. POWER Switches the DVB -T between operation and standby mode.
2. MUTE Enables/disables the audio.
3. 0-9 (Numeric Keys)
Selects the TV or Radio service channels
and individual menu option
4. FAV To shows favorite channels list.
5. CIRCULATING
6. DTV/VCR.
7. TV FORMAT
8. INFO Displays the program information
box on the screen.
9. MENU Displays the Menu on screen or
returns to previous menu from submenu.
10. EXIT Returns to the previous menu and
the screen.
11. EPG Displays the EPG (Electronic
Programme Guide) on screen only when available.
12. VOL+/- Changes the volume level in viewing
mode and setting in menu mode.
13. OK Confirms the choices and selection
with highlight menu item.
14. CH+/- Changes channels in viewing mode
and moves cursor up or down in menu mode.
15. LANGUAGE
16. PAUSE To still picture in current channel.
17. AUDIO Set the output direction for speaker.
18. TV/RADIO Select the TV/Radio mode.
19. SUBTITLE
20.TELETEXT

NPG DTR 1002S PRO V2.3
- 7 -
2.2 CONECTIONS

NPG DTR 1002S PRO V2.3
- 8 -
Connecting the power cable
Insert the plug of the power cable into the power socket.
Caution: The unit is completely disconnected from the mains supply if the power plug is pulled
out of the socket or with power button on OFF.
Inserting batteries into the remote control
To open battery compartment, press catch and remove cover. Observe correct polarity when
inserting the batteries (AAA, 2×1.5V)
Note:
If the unit no longer responds to the remote control, it is possible that the batteries are used up.
Make sure to remove consumed batteries.
Note on the environment:
Batteries must not be disposed of in domestic waste. Batteries must be handed in to a
used-battery collection point.

NPG DTR 1002S PRO V2.3
- 9 -
3. BASIC FUNCTIONS
Program List
TV Program List
Music Program List
Sort
By Name
By Service ID
Channel No.
Program Search
Automatic Search
Manual Search
Parental Control
Channel Lock
YES
NO
Parental Setting
Change PIN
System Setting
TV Standard
PAL
NTSC
AUTO
Display Type
4:3 PS
4:3 LB
16:9
Video Output
CVBS+S-Video
CVBS+RGB
Antenna Power
OFF
ON
Regional Setting
Language
Time Setting
System Schedule
Game
Mine
Tetris
Gomoku
Calendar
Accessory
System Information
Factory Default
NO
YES
System update
Personal Style
Menu Color
Transparency Level
Border Pattern
Entry Animation

NPG DTR 1002S PRO V2.3
- 10 -
3.1 Enter into system and power on-off
It will continue to play the latest program before previous power off if the database having any TV or RADIO
program.
1. Power on
When it is in “standby” mode, press “power” to power on.
2. Power off
When it is running, press “power” will enter into “standby” mode.
3.2 TV/RADIO programs switch
Press “TV/RADIO” to switch the programs when it is in full screen.
3.3 Station switch
1. Press “OK” to switch to the quick selet program list, press “VOL+/VOL-” to select different program class; press
“CH+/CH-” to select program.
Press “OK” to confirm program selection, press “EXIT” return to hide menu
1. If there are some favorite programs that been set up, just press “FAV” key to enter into the favorite program
list:
Press “CH+/CH-” to select favorite program, Press “OK” to confirm the selection,press “EXIT” to return to hide
menu.

NPG DTR 1002S PRO V2.3
- 11 -
3.4 Display information of programs
Press key “INFO” twice to show the information of current programs when it is in normal palying state.
3.5 Program return
Press “RECALL” under state of full-screen to return to the previous program palyed.
3.6 Audio and Language switch
1.Press “Language/Audio” key to switch the language of sound of current programs and switch among “stereo”-
“left”- “right”(stereo-left channel-right channel).
2.Press “VOL+/VOL-” to switch among “stereo”- “left”- “right”(stereo- left channel- right channel), press “CH+/CH-” to
switch the language of sound.
3.Press “OK” key to confirm the selection and return to full-screen play mode

NPG DTR 1002S PRO V2.3
- 12 -
3.7 Electronic programs guide (EPG)
1. You can press key “EPG” on the remote control to enter into the EPG page to know more aboutthe programs to
be played.As shown in the figure below:
(3).Tab 3 shows particular date list;
(4).Tab 4 shows program list, press “CH+/CH-” to switch between programs;
(5).Tab 5 shows the time range and program information, press “F.R & F.F” circularly to choose to browse the
time range and program information on basis of days of every week;
(6). Tab 6 shows the detailed program information in Tab 5;
(7). Tab 7 shows hint information for keys, corresponding to the three colors on the remote controller: Green
button, Yellow button , Blue button;
(8).Press “VOL+/VOL-” to switch between Tab 4 and Tab 5;
2. Press “Green” key to enter into Weekly Mode to display the programs and program information in different
time ranges of the currenty program list within one week
3.
(1).Press “F.R & F.F” key to switch between Thursday ---wednesday in Tab 3;
(2).Press “CH+/CH-“ key to move upward and downward to switch between the different programs in Tab 5;
(3).Press “VOL+/VOL-“ key to choose to view the program information in different time ranges in Tab 6.
3. When the cursor stops on Tab 5, press the yellow key to choose the detailed information corresponding to the
current program
4. When the cursor stops in Tab 5, press the” blue “key to enter Wakeup Timer menu to book programs
5. Press “EXIT” to exit from EPG.

NPG DTR 1002S PRO V2.3
- 13 -
3.8 Teletext
1. If you want to watch teletext, please press “Teletext” on the remote control to enter into teletext page.
2. Input three digits to go to corresponding page you want;
4. Press “CH+” to go to the previous page, while press “CH-” to go to the next page;
5. Press “VOL-” go to back 100pages, while press “VOL+” go to previous 100 pages.
6. Press “EXIT” to exit from teletext.
3.9 Subtitle
1. Subtitle is defaulted to be off; to see the caption information, press the “SUBTITLE” key on the remote control to
enter the Subtitle menu of the current programs
2. Press “VOL+/VOL-“ key to choose whether to open Subtitle

NPG DTR 1002S PRO V2.3
- 14 -
4. Digital TV
In the main menu of the system, under Digital TV, there are such as options as Channelmanager , installation
, configuration , software upgrade , factory default , version
press MENU key firstly to enter the main menu
In Main Menu, press “CH+/CH-“ key to choose Digital TV option and then Press
“OK “key once to enter Digital TV menu
4.1 Installation
There are two kinds of Installation mode as follow:
1. Manual Search
2. Auto Search
You can enter into parameter “installation page” via input password digitals(default password is “0000”), As
shown in the figure below:
3. Area Search

NPG DTR 1002S PRO V2.3
- 15 -
4.1.1 Manual Search
If you understand much about digital TV and know the frequency of the program or if you want to scan the
program at any frequency required, you can select manual scaning, whitch can save your much time.
1. You can move the cursor to “Manual search” via press “CH+/CH-” key under “installation menu”, then press
“OK” to enter into Manual searching page, As shown in the figure below:
4.1.2 Auto Search
You can search the programs of any channel.
1. You can move the cursor to “Auto search” via press “CH+/CH-” key under “installation menu”, then press “OK”
to enter intoAuto searching page, As shown in the figure below:
4.1.3 Areal Search
4.2 Channel Manager
System offer an efficient function of channel management such as channel organizer , channel
sorting ,channel grouping , delete all
4.2.1 Channel Organizer
1. You can enter the page as shown in the figure below via “MENU->Digital TV-> Channel Manager -> Channel
Organizer”
2. it will pop up and dialogue box prompting that “Channel not available” when there are no channels in database to

NPG DTR 1002S PRO V2.3
- 16 -
enter into, and it will not enter into channel organizer page.
3. Channel Organizer menu includes: Favorite Channel, Delete Channel, Mov Channel, Lock Channel. Press
“UP/DOWN” key to choose the line where Favorite Channel is, then press the 4-color key on the remote controller:
press the red key to set and cancel Favorite Channel, the green key to set or cancel “Delete Channel”, the yellow
3D key to set or cancel “Mov Channel”, the blue key to set or cancel “Lock Channel”;
4. To rename channel , press “CH+/CH-“ key to choose the line where the channel to be renamed is, press
“VOL+/VOL-“ key to enter the page to rename the channel, as shown below:
5. Press “EXIT” key to exit Channel Organizer page.
4.2.2 Channel Sorting
The channels shall be listed according to certain sequence so that the user can easily find them.
1. you can enter the page As shown in the figure below via “MENU->Digita TV-> Channel Manager -> Channel
Sorting”:
2. It will pop up and dialogue box prompt that “Channel not available” when there are no programs in database to enter
into, and it will not enter into channel sorting page.
3. Before sorting, the type of sorting shall be set, including the following items:
(1).First Option: choose the programs to be sorted via the selection area;
(2).Second Option: Press FTA(free of charge), Scramble(encrypted), ALL Freehand Encryted Channels;
(3).Third Option: According to alphabetic order A-Z, or Z-A,LCN+,LCN-,ALL
4.Press “CH+/CH-“ key choose Type , Press “VOL+/VOL-“ key to set Sorting Parameters;
5. After sorting is setted, to realize channel sorting, press “OK” key,
6.Press “EXIT” key to exit Channel Sorting page.
4.2.3 Channel Grouping
Group channels according to Movies, Sport, Music, Kids, Fashion etc.

NPG DTR 1002S PRO V2.3
- 17 -
1. You can enter the page As shown in the figure below via “MENU->Digita TV-> Channel Manager -> Channel
Grouping”:
2. It will pop up and dialogue box prompting that “Channel not available” when there are no programs in database
to enter into, and it will not enter into channel grouping page.
3. Press “CH+/CH-“ key to choose the line where the channel to be grouped is in, then press the number keys 1-8
on the remote controller to set different channel grouping.
4. After channel is edited, when “EXIT” key is pressed to exit the menu
4.2.4 Edit Channel
Have such operations as Add, Delete and Rename to channels.
1. You can enter the page as shown in the figure below via “MENU->Digita TV-> Channel Manager -> Edit Channel”:
2. It will pop up and dialogue box prompting that “No Carriers” when there are no programs in database to enter
into, and it will not enter intoADD-Edit Channel page.
3.Press the red key of the remote controller to enter Add Channel menu, as shown in Below
Under Add Channel menu, there are 6 parameters for adding one channel as follows:
(1).Area Name: For Area Name, press the “VOL+” key of the remote controller to enter the Area Name list on

NPG DTR 1002S PRO V2.3
- 18 -
the right, then press “CH+/CH-“ key to choose area name, press OK key to confirm;
(2).Carrier: Press “VOL+/VOL-“ key to choose;
(3).Channel Name: Press “VOL+/VOL-“ key to enter Rename Channel page as shown
(4).Audio PID, Video PID, PCR PID, Press 0-9 number key to revise values;
(5).Press “OK” key to confirm the adding, the system will hint with “successfully Updated” and return to Edit
Channel menu;
4.Press the yellow key of the remote controller to enter Rename Channel menu , as shown in below
The operation for this menu is as that of for Add Channel page.
4.2.5 Delete All
1. Under Channel Manager menu, press “CH+/CH-“ key to choose Delete All option, press ”OK” key again, then
the system will hint with the dialogue box of inputting password which is defaulted as “0000” .
2. To delete all TV channels, press “CH+/CH-“ key to move the cursor to ALL TV Channels option, press “OK” key,
then the system will hint with ”Delete all TV Channels?”
3.To delete all RADIO channel, press “CH+/CH-“ key move the cursor to ALL Radio Channels option, press “OK” key, then
the system will hint with ”Delete all Radio Channels? ”dialogue box , press “VOL+/VOL-“ key to choose “Yes” or “No”,
press “OK” key to confirm;

NPG DTR 1002S PRO V2.3
- 19 -
4.3 Configuration
Configuration provides individualized system setup function, you can configure the system according to your
own hobby and demand. You can enter Configuration menu via the menu(MENU->Digita TV->Configuration), as
shown in below
4.3.1 OSD
Via OSD option setup, you can set the user interface display mode according to your own demand. Via the menu (
MENU->Digita TV->Configuration -> OSD), you can enter OSD menu, as shown in below
All options are listed on the left of the OSD menu, when the cursor moves on the option in OSD menu, the values
corresponding to this option on the right of the menu, press “CH+/CH-“ key to move upward and downward to choose
the options in OSD menu.
There are following options in OSD menu:
(1).OSD Option sets system color;
(2).Time on OSD Option sets whether to display system time in full-screen play channel (3)OSD Timeout Option, move
the cursor to OSD Timeout Option, press “VOL+/VOL-“ key to choose among 1-6s, the default is 3s;
(4). OSD Trans option set menu color, press “VOL+/VOL-“ key to adjust between 0%-60%.
(5) OSD Language option: The system has the user interface supporting a couple of languages, you can set language
via OSD Language option:
(1)Move the cursor onto OSD Language option , Press VOL+ key to enter OSD Language List as shown in below
(6) .1st Audio Language option: Press “VOL+” key to enter the currently supported Audio Language list, in the Audio
Languagelist, press “CH+/CH-“ key to choose language, press “OK” key to confirm;
Press “OK” key to confirm the editing action in OSDmenu