Nugens NC-A24P User manual

All-in-One PC
User Manual

Getting Started
Specifications
To help you use your Nugens All-In-One PC, we have designed a set of guides:
First off, the Setup Guide helps you get started with setting up your PC.
The Quick Guide introduces you to the basic features and functions of your new PC.
For more on how your PC can help you to be more productive.
To start your All-in-One PC for the first time:
1. Press the power button on your All-in-One PC on the bottom left side of the screen.
Wait for a few minutes until the setup screen appears.
2. From the setup screen, pick your Region and Language.
3. Carefully read the License Terms, then select “I Accept”.
4. Follow the onscreen instructions to configure the following basic items: Personalize,
Get online, Settings, Your Account.
5. Once the setup process is completed, the start screen appears.
Display
Processor
Wireless
Memory
Storage
I/O Port
Webcam
23.8 inch FHD 1920*1080
Intel Core i5-4310M (Dual Core, 3M Cache, 2.7GHz, with Turbo Boost
up to 3.4GHz, Intel HD Graphics 4600)
802.11 b/g/n/ac , Bluetooth 4.2
DDR3 1600 8GB
SSD 256GB
USB 3.0*2, USB2.0*4, RJ45*1, Audio Output*1, Mic Input*1
HDMI Output*1, VGA Output*1
210M CMOS

Power Button
Mic Input
USB 2.0 USB 2.0 VGA Output Power
USB 3.0 HDMI Output
Webcam
Audio Output
LAN
The Power Button is located on bottom right of your All-In-One PC.

Shutting down (turning off) the computer
To turn the Power Off, do any of the following:
Use the Windows Shut Down Command: Click “Start” > “Power” then click “Shut Down”.
If you need to power down the computer for a short while, but don’t want to completely
shut it down, you can put it into Hibernate by pressing the power button.
You can also put the computer in sleep mode by pressing the sleep hotkey <Fn> + <F4>.
Although you can turn off the computer with the power button, the recommended
procedure is to use the Windows Shut Down Command.
Connecting Bluetooth devices
Before you can use a Bluetooth device, you must establish a Bluetooth connection.
1. Type “Bluetooth” in the Search Box, and then select “Bluetooth and other devices
settings”.
2. Enable Bluetooth, if it is not already enabled.
3. Select “Add Bluetooth or other device”, and then in the “Add a device” dialog box,
select “Bluetooth”.
4. Select your device from the list, and then follow the on-screen instructions.
Dialy maintenance
Please pay attention to the following points during use:
• Do not expose the computer to direct sunlight.
• Do not place it near sources of heat, such as a radiator.
• Do not expose the computer to temperatures below 0º C (32º F) or above 50º C (122º F).
• Do not subject the computer to magnetic fields.
• Do not expose the computer to rain or moisture.
• Do not spill water or any liquid on the computer.
• Do not subject the computer to heavy shock or vibration.
• Do not expose the computer to dust or dirt.
• Never place the computer on uneven surfaces.
Turning Your PC Off or Sleep
Connecting Bluetooth Devices
Daily Maintenance