Epson ActionTower 2000 User manual

The KGB/CIA World Factbook CD-ROM game included with your system is an newer version
of this game then the one installed on your computer’s hard disk drive.
To install this game
correctly in Windows please follow the instructions given below:
Removing the Existing KGB/CIA World Factbook from the Hard Drive
1. Exit to Windows Program Manager by clicking on the EXIT button on the right side of the
FocalPoint screen.
2. From The Program Manager window open the FILE menu and select EXIT WINDOWS.
3. At the C:\> prompt type the following: Deltree C:\KGBCIA then press Enter.
4. Press Y then press Enter to answer the question Delete directory “kgbcia” and all its
subdirectories? [yn]
5. Reboot you computer.
Reinstalling KGB/CIA World Factbook
1. Exit to Windows Program Manager by clicking on the EXIT button on the right side of the
FocalPoint screen.
2. Place the KGB/CIA disk into the CD-ROM drive.
3. From The Program Manager window open the FILE menu and select RUN option.
4. In the Command Line, type D:SETUP and press Enter.
5. The installation will begin. You will be asked on which drive and directory you want the
software installed. To choose the default setting, press Enter or click Continue.
6. The Necessary files will now be installed onto your hard drive.
When the installation process is done correctly you will see a new group called “M.O.S.T.” in the
Windows Program Manager.
Installing the Program in FocalPoint
To Setup KGB/CIA World Factbook in FocalPoint please follow the instruction given below.
1. Single click on the SETUP button on the right side of the FocalPoint screen, this will activate
FocalPoint SETUP.
2. Single click on the KGB/CIA World Factbook icon.
3. In the Command Line, type C:\KGBCIAMOST.EXE KGBCIA.INI.
4. Click on the Icon button, in the File Name area type C:\KGBCIA\MOST.EXE, then click on
the OK button. Click on the OK button one more time to go back to FocalPoint main menu
screen.
5. To deactivate FocalPoint SETUP single click on the SETUP button again. This will complete
the KGB/CIA Setup process in FocalPoint.
Loading the Program in FocalPoint
To load the KGB/CIA World Factbook (M.O.S.T.) Windows software from FocalPoint, single-
click on the KGB/CIA World Factbook program icon.

Update
This update revises the Read This First booklet that came with your
computer. In addition to the multimedia software listed in that
booklet, your computer also comes with these multimedia programs:
InterplayTM Battle Chess® game software on CD
Technical support:
[phone]
Fax:
[phone]
BBS:
[phone]
Paramount Interactive Lenny’s MusicToonsTMgame software
on CD
Technical support:
[phone]
Fax:
[phone]
This update tells you how to use Microsoft® WindowsTMto install
these programs on your computer’s hard disk drive and how to
create buttons for them in the EPSON® FocalPointTM Windows
environment program. See your Read This First booklet, your
Windows documentation, and the on-line help utilities for in-depth
information on using Windows and FocalPoint.
For information on using Battle Chess and Lenny’s MusicToons,
see the program’s README file or on-line help utility, or contact
the manufacturer at the numbers listed above.
lnstalling BattIe Chess
To install Battle Chess using Windows, follow these steps:
1. Start the Windows Program Manager.
2. Insert the Battle Chess CD into the CD-ROM drive. Then wait
for the green light on the CD-ROM drive to light up.
3. From the File menu, select Run.
1

4. Then select Browse.
5. In the Drives dialog box, select drive D: to specify your
CD-ROM drive.
6. In the Directories box, select the MPCCHESS directory.
7. In the File Name box, select setup. exe. Then select OK.
8. You see the Battle Chess installation screen. Follow the
instructions on the screen to accept the suggested directory and
select Continue.
9. The installation program copies the files from the CD to your
hard disk drive and creates the Battle Chess group and program
icon in Windows. When the installation is complete, you see a
confirmation message. Select OK to continue.
10. Your computer automatically starts Battle Chess. Make sure you
hear the sound the program produces and can select items on
the screen to test it. Then select Exit from the File menu to exit
the program.
Adding Battle Chess to FocalPoint
To add a program button for Battle Chess in the FocalPoint program,
follow these steps:
1. Start FocalPoint and select the Games program group.
2. Go to page 2 of the Games group.
3. Select the Setup control button (with the wrench icon) on the
right side of the screen. The Setup bar appears on the left side of
the screen and empty program buttons appear in the program
icon selection screen in the middle.
4. Select one of the empty program buttons. You see the Button
Properties dialog box.
2

5. In the Title field, type Battle Chess
6. Move the cursor to the Command Line field and select the
Find Programbutton.
7. In the Drives box, select drive D :
8. In the Directories box, select the MPCCHESS directory.
9. In the File Name box, select mpcchess . exe. Then select OK.
10. You see the Button Properties dialog box. FocalPoint Setup
automatically fills in the Working Directory box and selects the
Battle Chess icon. Select OK.
11. Select the Setup control button again to exit FocalPoint Setup.
Now Battle Chess is installed in Windows and in FocalPoint
Installing Lenny’s Music Toons
To install Lenny’s MusicToons using Windows, follow these steps:
1. Start the Windows Program Manager.
2. Insert the Lenny’s MusicToons CD into the CD-ROM drive
Then wait a few seconds for the CD to initialize.
3. From the File menu, select Run.
4. Then select Browse.
5. In the Drives dialog box, select drive D : to identify your
CD-ROM drive.
6. In the File Name box, select install. exe. Then select OK.
7. You see the program’s installation screen. Follow the instructions
on the screen to install the program and continue.
3

8. The installation program copies the files from the CD to your
hard disk drive, creates the Lenny’s MusicToons group, and
creates Lennys’ MusicToons, Sound Test, and Read Me program
icons. When the installation is complete, you see a confirmation
message. Select OK to continue.
9. You see a prompt asking if you want to view the program’s
README.DOC file. Select Yes or No.
10. When you see the Lenny’s MusicToons program group, select
the icon to run the program and test it. Make sure you hear the
sound the program produces and can select items on the screen.
Then exit the program.
Adding Lenny’s Music Toons to FocalPoint
To add program buttons for Lenny’s MusicToons in the FocalPoint
program, follow these steps:
1. Start FocalPoint and select the Games program group
2. Go to page 2 of the Games group.
3. Select the Setup control button (with the wrench icon) on the
right side of the screen. The Setup bar appears on the left side of
the screen and empty program buttons appear in the program
icon selection screen in the middle.
4. Select one of the empty program buttons. You see the Button
Properties dialog box.
5. In the Title field, type Lenny’s MusicToons.
6. Move the cursor to the Command Line field and select the
Find Programbutton.
7. In the Drives box, select drive D :
8. In the File Name box, select lenny . exe. Then select OK.
4

10. You see the Button Properties dialog box. FocalPoint Setup
automatically fills in the Working Directory box and selects
the Lenny’s MusicToons icon. Select OK.
11. Repeat steps 4 through 10 to create the Sound Test button
substituting the following information:
In the Title field, type Sound Test.
In the File Name box, select lensnoop. exe.
12. Repeat steps 4 through 6 again to create the Read Me button
substituting Lenny’s Read Me in the Title field.
13. In the Drives box. select drive C :
14. In the Directories box, select the windows directory.
15. In the File Name box, select notepad. exe. Then select OK.
16. You see the Button Properties dialog box. Move the cursor to
the end of the command in the Command Line field and type
c:\lenny\readme.doc.
17. Now select the icon shown in the Icon box. In the dialog box,
select the following:
Drive :c:
Directory: windows
File Name: *.exe
18. Then select the file notepad. exe when the *.exe files are
listed.
19. Select OK.
20. Select the Setup control button again to exit FocalPoint Setup.
Now all the components of Lenny’s MusicToons are installed in
Windows and in FocalPoint.
5

EPSON is a registered trademark of Seiko Epson Corporation.
FocalPoint is a trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may
be trademarks of their respective companies.
Copyright © 1994 by Epson America, Inc.
400346500
Torrance, California, USA 6/94
6

IMPORTANT NOTlCE
DISCLAIMER OF WARRANTY
Epson America makes no representations or warranties, either express or implied, by or
with respect to anything in this manual, and shall not be liable for any implied warranties
ofmerchantability and fitness for a particular purpose or for any indirect, special, or
consequential damages. Some states do not allow the exclusion of incidental or
consequential damages, so this exclusion may not apply to you.
COPYRlGHT NOTlCE
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted, in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the prior written permission of Epson
America, Inc. No patent liability is assumed with respect to the use of information
contained herein. Nor is any liability assumed for damages resulting from the use of the
information contained herein. Further, this publication and features described herein are
subject to change without notice.
TRADE MARKS
EPSON is a registered trademark of Seiko Epson Corporation
EPSON Connection is a service mark of Epson America, Inc
General Notice: Other product names used herein are for identification purposes only and
may be trademarks of their respective companies.
Copyright © 1994 by Epson America, Inc. 400352000
Torrance, California, USA 6/94
ii

Important Safety Instructions
Read all of these instructions and save them for later reference. Follow
all warnings and instructions marked on the computer.
•
•
•
•
•
•
•
•
•
•
Unplug the computer before cleaning. Clean with a damp cloth only.
Do not spill liquid on the computer.
Do not place the computer on an unstable surface or near a radiator
or heat register.
Do not block or cover the openings in the computer’s cabinet. Do not
insert objects through the slots.
Use only the type of power source indicated on the computer’s label.
Connect all equipment to properly grounded power outlets. Avoid
using outlets on the same circuit as photocopiers or air control
systems that regularly switch on and off.
Do not let the computer’s power cord become damaged or frayed.
If you use an extension cord with the computer, make sure the total
ampere rating of the devices plugged into the extension cord does
not exceed the cord’s ampere rating. Also, make sure the total of all
devices plugged into the wall outlet does not exceed 15 amperes.
Except as specifically explained in this User'S Guide, do not attempt
to service the computer yourself.
Unplug the computer and refer servicing to qualified service
personnel under the following conditions:
If the power cord or plug is damaged; if liquid has entered the
computer; if the computer has been dropped or the cabinet damaged;
if the computer does not operate normally or exhibits a distinct
change in performance. Adjust only those controls that are covered
by the operating instructions.
If you plan to use the computer in Germany, observe the following:
To provide adequate short-circuit protection and over-current
protection for this computer, the building installation must be
protected by a 16 Amp circuit breaker.
Beim Anschluß des Computers an die Netzversorgung muß
sichergestellt werden, daß die Gebaudeinstallation mit einem
16 A Uberstromschutzschalter abgesichert ist.
.. .
111

Importantes instructions de securite
Lire attentivement les instructions suivantes et les conserver pour les
consulter en cas de besoin. Observer soigneusement tous les
avertissements et directives marques sur l’ordinateur.
•
•
•
•
•
•
•
•
•
•
Debrancher l’ordinateur avant de le nettoyer. N’utiliser chiffon chiffon
humide. Veiller a ne pas renverser de liquides sur l’appareil.
Ne pas placer l’ordinateur sur une surface instable ni pres d'une
source de chaleur.
Ne pas bloquer ni couvrir les orifices d’aeration de l’appareil. Ne pas
introduire d’objets dans les ouvertures.
Utiliser seulement le type de source d’alimentation electrique indiqué
sur l’étiquette.
Tout l’équipement doit étre branché sur des prises de courant avec
contact de terre. Ne jamais utiliser une prise sur le méme circuit
qu’un appareil a photocopies ou un systeme de controle de
ventilation avec commutation marche-arrêt automatique.
S’assurer que le cordon d’alimentation de l’ordinateur n’est pas
abîmé ni effiloché.
Dans le cas oú on utilise un cordon de rallonge avec l’ordinateur,
s’assurer que l’intensité en amperes requise pour tous les appareils
branches sur ce cordon ne soit pas supérieure a la capacité du cordon.
S’assurer aussi que cette intensté ne dépasse jamais la somme de 15
amperes pour l’ensemble des appareils.
Sauf dans les cas spécifiques expliqués dans ce manuel de l’usager,
ne pas essayer d’entretenir ou de reparer l’ordinateur soi-méme.
Debrancher l’ordinateur et contacter un technicien qualifié dans les
circonstances suivantes:
Si le cordon ou la prise sont abîmes; si un liquide a pénétré á
l’intérieur de l’appareil; si on a laissé tomber l’appareil ou si le boîtier
est endommagé; sil’ordinateur ne fonctionne pas normalement ou
fonctionne d'une maniére trés différente de l’ordinaire. N’ajuster que
les commandes décrites dans les directives.
Pour utiliser l’ordinateur en Allemagne, il est nécessaire que le
bâtiment soit munid’un disjoncteur de 16 amperes pour protéger
l’ordinateur contre les courts-circuits et le survoltage.
iv

Contents
Introduction
VGA Drivers ...............................
2
Optional Equipment ...........................
3
Memory...............................
3
Video Memory ...........................
3
Microprocessor ...........................
3
Drives ................................
3
Math Coprocessor .........................
4
How to Use This Manual ........................
4
Where to Get Help ............................
5
CompuServe On-line Support ..................
6
Chapter I
Setting Up Your-System
Unpacking Your Computer ......................
1-1
Setting the Voltage Selector Switch ..................
1-2
Connecting Computer Components .................
1-3
Connecting a Keyboard and Mouse ...............
1-4
Connecting a Monitor .......................
1-5
Connecting a Printer or Other Device ..............
1-6
Connecting the Power Cord ...................
1-7
Turning On the Computer .......................
1-7
Turning Off the Computer .......................
1-9
Running the SETUP Program .....................
1-10
Starting the SETUP Program ...................
1-10
Displaying System Information .................
1-12
Setting the Date and Time ....................
1-12
Setting the Diskette Drive(s) ...................
1-12
Setting the Hard Disk Drive(s) ..................
1-13
Checking System Memory ....................
1-14
Setting the Video Display Type .................
1-14
Setting Keyboard Options ....................
1-15
Setting the Processor Speed ...................
1-15
Cyrix Cache Option ........................
1-16
Setting Chip Set Feature Control Options ...........
1-16
V

Exiting SETUP ...........
Post-SETUP Procedures ........
1-17
1-17
Chapter 2 Using Your Computer
Working Comfortably
2-1
Inserting and Removing Disks
2-2
Stopping a Command or Program
2-3
Resetting the Computer
2-4
Changing the Processor Speed
2-5
Chapter 3 Installing and Removing Options
Removing the Cover
Replacing the Cover
Locating the Internal Components
Changing the Jumper Settings
Setting the Jumpers
Installing Memory Modules (SIMMs)
Inserting SIMMs
Removing SIMMs
Installing an Option Card
Removing an Option Card
Adding Video Memory
Installing the Video Chips
Installing the Math Coprocessor
Post-installation Procedures
3-2
3-4
3-5
3-7
3-8
3-10
3-11
3-13
3-15
3-18
3-18
3-18
3-20
3-22
Chapter 4 lnstalling and Removing Drives
Setting the IDE Hard Disk Drive Jumpers
4-2
Removing Mounting Frames
4-3
Installing a Drive in the Front Internal Drive Bay 4-4
Removing a Drive From the Front Internal Drive Bay 4-8
Installing a Drive in an External Drive Bay 4-9
Removing a Drive From an External Drive Bay 4-12
Installing a Drive in the Rear Internal Drive Bay 4-14
Removing a Drive From the Rear Internal Drive Bay 4-17
Post-installation Procedures
4-19
vi

Chapter 5
Troubleshooting
Identifying Your System
The Computer Will Not Start
The Computer Does Not Respond
Keyboard Problems
Mouse Problems
Monitor Problems
Diskette Problems
Diskette Drive Problems
Hard Disk Drive Problems
Software Problems
Printer Problems
Option Card Problems
Memory Module Problems
Controller Problems
Internal Battery Problems
5-1
5-3
5-4
5-4
5-5
5-5
5-6
5-7
5-8
5-9
5-10
5-11
5-11
5-12
5-12
Appendix A Specifications
CPU and Memory..................
Controllers ......................
Interfaces .......................
Mass Storage.....................
Keyboard .......................
SETUP Program ...................
Physical Characteristics...............
Power Supply.....................
Environmental Requirements ...........
Tested Operating Environments..........
Video Memory and Supported Resolutions ...
Options Available from EPSON..........
Hard Disk Drive Types...............
Drive Option Information .............
DMA Assignments .................
Hardware Interrupts ................
System Memory Map ................
System I/O Address Map .............
Connector Pin Assignments ............
A-1
A-2
A-2
A-3
A-4
A-4
A-4
A-5
A-5
A-6
A-7
A-7
A-8
A-10
A-11
A-12
A-13
A-14
A-16
vii

Glossary
Index
EPSON U.S. and International Marketing Locations
. . .
Vlll

lntroduction
Your new EPSON® computer provides the following features:
Cyrix®486SLC-33 or 486SLC2-50 microprocessor
2MB, 4MB, or 8MB of internal memory, expandable to 16MB
System and video BIOS shadow RAM
At least 512KB of on-board video memory; 512KB is
expandable to 1024KB (1MB)
Built-in, local bus SVGA port
Two built-in serial ports and one built-in parallel port
One built-in PS/2TM compatible keyboard port and one
built-in PS/ 2 compatible mouse port
1KB of internal cache
Support for relocation of 128KB of memory
High-speed local bus video controller with True Color’”
support, providing resolutions up to 1280 x 1024 in 16 colors
Socket for an optional math coprocessor
Five full-length, 16-bit, ISA-compatible option slots
Space for up to seven mass storage devices (four externally
accessible and three internal)
Support for up to two IDE hard disk drives and two
diskette drives (or one diskette drive and one tape drive)
Real-time clock and calendar on main system board with
built-in rechargeable battery backup.
Introduction 1

The 486SLC microprocessor in this computer is i486SX
instruction set compatible. It features a 32-bit internal/ 16-bit
external data path.
The shadow RAM feature speeds up processing by moving the
system and video BIOS into the RAM area of memory.
Using the built-in interfaces, you can connect most of your
peripheral devices directly to the computer so you do not have
to install option cards. You can use the option slots to enhance
your system with extra functions such as a modem card, a
network controller card, or additional interface ports.
The local bus video interface provides data transfer at the full
speed of the processor, rather than at the standard 8.33 MHz
ISA bus speed.
VGA Drivers
Your computer comes with VGA drivers and utilities for use
with the integrated video interface. With these drivers, you can
take advantage of the extended VGA features such as high
resolutions and 132-column text mode when you run popular
applications. If your system was configured for you, these
drivers and utilities may be installed on your hard disk. If you
need to install them yourself, see the README files on your
Drivers diskettes or your hard drive, as described in Chapter 1.
To obtain drivers for additional applications, call the EPSON
ConnectionSM or access the Epson America Forum on
CompuServe@.
2 Introduction

Optional Equipment
You can easily upgrade your computer by installing additional
memory and a wide variety of options, as described in
Chapters 3 and 4.
Memory
By adding 1MB or 4MB SIMMs (single inline memory modules)
to the main system board, you can expand the computer’s
memory up to 16MB.
Video Memory
Your system came with at least 512KB of video memory. If
your system came with 512KB, you can increase it to 1024KB
(lMB), which allows you to use higher resolutions with more
colors.
Microprocessor
Your system supports one of the following microprocessors:
486SLC-33
486SLC2-50.
Drives
Your system can hold up to seven mass storage devices,
including hard disk drives, diskette drives, tape drive(s), a
CD-ROM drive, or optical drive(s). As your storage needs
expand, you can install additional drives.
Introduction 3

Math Coprocessor
You may want to install an optional math coprocessor, which
allows your computer to perform mathematical calculations
and process graphics more quickly.
How to Use This Manual
This manual contains the information you need to get the best
results from your computer. You do not have to read
everything; check the following chapter summaries.
Chapter 1 provides simple instructions for setting up your
system, turning it on and off, and connecting peripheral
devices such as the monitor and printer. It also describes
running the SETUP program to define your computer’s
configuration.
Chapter 2 covers general operating procedures, such as using
diskettes, resetting the computer, and changing the processor
speed.
Chapter 3 describes how to remove and replace the computer’s
cover, change jumper settings, and install optional equipment
such as option cards and memory modules.
Chapter 4 explains how to install and remove disk drives
Chapter 5 contains troubleshooting tips.
Appendix A lists the specifications of your computer.
At the end of this manual you’ll find a Glossary, an Index, and
a list of international marketing locations.
4 Introduction

Where to Get Help
If you purchased your computer in the United States or
Canada, EPSON provides customer support and service
through a network of Authorized EPSON Customer Care
Centers. EPSON also provides support services through the
EPSON Connection. In the United States, dial [phone]. In
Canada, dial (800) GO-EPSON.
Call the EPSON Connection for the following:
Technical assistance with the installation, configuration,
and operation of EPSON products
Assistance in locating your nearest Authorized EPSON
Reseller or Service Center
Customer Relations
EPSON technical information library fax service
Product literature on current and new products.
You can purchase accessories, manuals, or parts for EPSON
products from EPSON Accessories at [phone] (U.S. sales
only). In Canada, call (800) GO-EPSON for sales locations.
When you call for technical assistance, be ready to identify
your system and its configuration, and provide any error
messages to the support staff. See Chapter 5 for more
information.
If you purchased your computer outside the United States or
Canada, contact your EPSON dealer or the marketing location
nearest you for customer support and service. International
marketing locations are listed at the end of this manual.
Introduction 5