Zotac ZBOX HD-NS21-E User manual
1
ZOTAC ZBOX
ZOTAC ZBOX
User’s Manual
No part of this manual, including the products and software described in it,
may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language in any form or by any means,except documenta-
tion kept by the purchaser for backup purposes, without the express written
permission of ZOTAC.
Products and corporate names mentioned in this manual may not be reg-
istered trademarks or copyrights of their respective companies, and are
respective owners.
Every effort has been made to ensure that the contents of this manual are cor-
rect and up to date. However, the manufacturer makes no guarantee regard-
ing the accuracy of its contents, and reserves the right to make changes
without prior notice.
2
ZOTAC ZBOX
Table of Contents
-------------------------------------------------------------------------- 3
-------------------------------------------------------------------------------- 4
Setting up your system ----------------------------------------------------------------------- 4
Care during use -------------------------------------------------------------------------------- 4
--------------------------------------------------------------------------------------------- 5
Package contents ------------------------------------------------------------------------------ 5
-------------------------------------------------------- 6
Front view ---------------------------------------------------------------------------------------- 6
Rear view----------------------------------------------------------------------------------------- 7
------------------------------------------------- 8
Installing a memory module ----------------------------------------------------------------- 8
Removing the memory module ------------------------------------------------------------- 9
Installing and removing a hard disk ------------------------------------------------------- 10
Installing a hard disk (for Type 1 HDD Bracket)------------------------------------ 10
Installing a hard disk (for Type 2 HDD Bracket)------------------------------------ 11
Removing a hard disk (for Type 1 HDD Bracket) ---------------------------------- 12
Removing a hard disk (for Type 2 HDD Bracket) ---------------------------------- 13
--------------------------------------------------------------- 14
Installing the stand----------------------------------------------------------------------------- 14
Installing your ZOTAC ZBOX to a monitor ----------------------------------------------- 14
---------------------------------------------------------------- 15
--------------------------------------------------------------- 16
Installing an operating system -------------------------------------------------------------- 16
Installing system drivers---------------------------------------------------------------------- 16
----------------------------------------------------------------------- 17
----------------------------------------------------------- 17
--------------------------------------------------------------- 17
Using a static IP ---------------------------------------------------------------------------- 17
Using a dynamic IP (PPPoE connection) -------------------------------------------- 18
------------------------------------------ 18
3
ZOTAC ZBOX
q
v NVIDIA®
qProduct Size
v 188mm x 188mm x 44mm
q
v Intel®
q
v Supports Windows XP 32 bit/64 bit, Windows Vista 32 bit/64 bit and Windows
7 32bit/64bit
q
v
v
v
q
v Supports hot plug and play
v Six USB 2.0 ports (two front panel ports, four rear panel ports)
v
q
v
v
vSupport one ESATA port.
q
v
q
v
v Supports Jack-Sensing function
q
v
q
v
v
v
4
ZOTAC ZBOX
Safety information
Your ZOTAC ZBOX is designed and tested to meet the latest standards of safety for infor-
mation technology equipment. However, to ensure your safety, it is important that you read
the following safety instructions.
Setting up your system
Read and follow all instructions in the documentation before you operate your system.
Do not use this product near water or a heat source such as a radiator.
Set up the system on a stable surface with the provided stand. Never use the system
alone without the stand.
Openings on the chassis are for ventilation. Do not block or cover these openings.
objects of any kind into the ventilation openings.
Use this product in environments with ambient temperatures between 0@and 35@.
the total ampere rating of the devices plugged into the extension cord does not
exceed its ampere rating.
Care during use
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
unplug all power, modem, and network cables from the power outlets before cleaning
the system.
If you encounter the following technical problems with the product, unplug the power
¾The power cord or plug is damaged.
¾
¾The system does not function properly even if you follow the operating instructions.
¾The system was dropped or the cabinet is damaged.
¾The system performance changes.
5
ZOTAC ZBOX
Welcome
Congratulations on your purchase of the ZOTAC ZBOX. The following illustration displays
the package contents of your new ZOTAC ZBOX. If any of the below items is damaged or
missed, contact your retailer.
6
ZOTAC ZBOX
Getting to know your ZOTAC ZBOX
Front view
1 2 3 4 5 6 7
Refer to the diagram below to identify the components on this side of the system
The stereo headphone jack (3.5mm) is used to connect the system’s audio out
The microphone jack is designed to connect the microphone used for video confer-
encing, voice narrations or simple audio recordings.
The USB (Universal Serial Bus) port is compatible with USB devices such as key-
boards, mouse devices, cameras and hard disk drives. USB allows many devices
to run simultaneously on a single computer, with some peripheral acting as addi-
tional plug-in sites or hubs.
drive.
The power switch allows powering ON and OFF the system
7
ZOTAC ZBOX
Rear view
Refer to the diagram below to identify the components on this side of the system.
The external SATA port is compatible with e.SATA devices such as external hard
drives and Blu-ray drives
The USB (Universal Serial Bus) port is compatible with USB devices such as key-
boards, mouse devices, cameras and hard disk drives. USB allows many devices
to run simultaneously on a single computer, with some peripheral acting as addi-
tional plug-in sites or hubs.
a local network.
Plug an optical cable into this jack for digital audio transfer.
The supplied power adapter converts AC power to DC power for use with this jack.
Power supplied through this jack supplies power to the PC. To prevent damage to
the PC, always use the supplied power adapter.
The power adapter may become warm to hot when in use. Do not cover the
adapter and keep it away from your body.
1 2 3 2 4 5 6 7 4
8
ZOTAC ZBOX
Installing Hardware inside ZOTAC ZBOX
Before installing hardware, please follow the instructions below to remove the cover of your
ZOTAC ZBOX.
1. Unscrew.
Installing a memory module
at a 45 degree angle.
ZOTAC ZBOX
memory slot.
Removing the memory module
below to release the memory module.
2. The memory module can be easily taken out.
This ZOTAC ZBOX accomodates two
install at least one module in any of the two slots. If you want to install two SO-
ZOTAC ZBOX
Installing and removing a hard disk
Users please note that the hard disk bracket of your ZOTAC ZBOX will be one of the two
images below. Please install or remove the hard disk according to the hard disk bracket type.
Type 1 HDD Bracket
Installing a hard disk (for Type 1 HDD Bracket)
Type 2 HDD Bracket
11
ZOTAC ZBOX
Installing a hard disk (for Type 2 HDD Bracket)
3. Insert a 2.5-inch SATA hard disk into the bracket at a 45 degree angle and gently slide
into the connector.
12
ZOTAC ZBOX
2. Insert a 2.5-inch SATA hard disk into the bracket at a 45-degree angle.
pressing down on the hard drive to secure the hard disk into the bracket.
4. Ensure the hard disk snaps into place with the plastic clips.
Removing a hard disk (for Type 1 HDD Bracket)
13
ZOTAC ZBOX
Removing a hard disk (for Type 2 HDD Bracket)
14
ZOTAC ZBOX
Positioning your ZOTAC ZBOX
Do not position the ZOTAC ZBOX where the ventilation holes are covered. To
guarantee proper use, leave 4 inches (10 cm) spacing in front of the ventilation
holes.
ZOTAC mini-PC system provide ample connectivities in tiny space, please choose
Installing your ZOTAC ZBOX to a monitor
1.
2. Place your ZOTAC ZBOX on the VESA mount noting the correct alignment and
then secure the PC to the VESA mount with a coin.
To fasten the VESA mount, your monitor must comply with VESA75 Or VESA100
standard.
monitor should be lay this equipment on a reliable surface when install. A drop or
fall could cause injury.
Installing the stand
1.
2. Align the stand screw to the PC screw hole and then secure the Stand to the PC
with a coin.
Do not place your ZOTAC ZBOX on the desktop without the stand.
15
ZOTAC ZBOX
Setting up your ZOTAC ZBOX
You need to connect peripherals before using your ZOTAC ZBOX.
123
4
1.
Connect USB devices like wired/wireless keyboards (varying with areas), mouse
devices and printers to the USB ports on the system rear panel.
the other End to a hub or switch.
Connect the supplied AC adapter to the DC IN jack on the system rear panel and
then press the power switch on the front panel to turn on the system.
When your ZOTAC ZBOX is not in use, unplug the power adapter or switch off the
AC outlet to save on power consumption.
12
3
4
16
ZOTAC ZBOX
Installing drivers and software
Installing an operating system
The ZOTAC ZBOX does not ship with an operating system preinstalled. The user
must install the operating system before the ZOTAC ZBOX can be used. The follow-
®XP
®Vista
®7
1. Attach external CD/DVD drive via USB or eSATA
3. Wait for the ZOTAC ZBOX to boot from the disk.
4. Follow the onscreen directions to install the operating system.
5. Install system drivers to gain full functionality of the ZOTAC ZBOX hardware and
features.
Installing system drivers
Before you can use the full features of the ZOTAC ZBOX, the system drivers must
be installed. The following types of operating systems are supported by the ZOTAC
®XP
®Vista
®7
1. Insert the ZOTAC ZBOX driver CD. If
autorun is enabled, the driver installation
main menu will show up automatically. If
ation main menu. Windows Vista may
“Allow” or “OK” to proceed.
2. The following drivers are available on the
17
ZOTAC ZBOX
Using your ZOTAC ZBOX
1. Double-click the crossed wireless network icon (pic) on
2. Select the wireless network you want to connect to
from the list and click Connect.
3. After connection was established, you will see
Connected.
Connect the supplied wireless antenna to your ZOTAC
ZBOX to enhance wireless signal reception.
For security concerns, Do NOT connect to an
unsecured network, otherwise, the transmitted
information without encryption might be visible to
others.
Enter the network security key if necessary.
1. Right-click the network icon on the
Network Connections.
select Properties.
3. Highlight Internet protocol (TCP/IP) and
click Properties.
4. Select Use the following IP address.
5. Enter your IP address, subnet mask and
Default gateway.
6. If needed, enter the preferred DNS server address.
Each driver must be installed individually to ensure proper operation of the
ZOTAC ZBOX.
3. Select the driver you want to install. The driver installer should launch.
4. Follow the onscreen instructions to install the drivers.
5. Restart the system.
18
ZOTAC ZBOX
1. Repeat Step 1-3 in the previous section.
2. Select Obtain an IP address automatically and click OK.
4. Click Next.
5. Select Connect to the Internet and click Next.
6. Select Set up my connec-
tion manually.
7. Select your connection
type and click Next.
8. Enter your ISP Name and
click Next.
9. Enter your User name and
Password. Click Next.
11. Enter your user name and password. Click
Connect to connect to the internet.
Contact your internet Service Provider (ISP) if you have problems connecting to
the network.
1. Access the Sound settings via the system Control Panel
2. Under Playback devices, click the NVIDIA
3. Click the “Set as Default” in the lower right
hand corner.
4. Click OK to exit the setup.
The screenshots shown in this section are
for the Windows®Vista operating system.
ZOTAC ZBOX
Table of contents
Other Zotac Desktop manuals
Zotac
Zotac ZBOX Magnus EN1080K User manual
Zotac
Zotac MAG User manual
Zotac
Zotac ZBOX nano XS User manual
Zotac
Zotac ZBOX nano AD10 User manual
Zotac
Zotac ZBOX Giga User manual
Zotac
Zotac ZBOX NANO User manual
Zotac
Zotac ZBOX MI553 User manual
Zotac
Zotac ZBOX PICO User manual
Zotac
Zotac ZBOX MI553 User manual
Zotac
Zotac ZBOX series User manual
Zotac
Zotac ZBOX pico User manual
Zotac
Zotac ZBOX SD-ID10 User manual
Zotac
Zotac VR GO User manual
Zotac
Zotac ZBOX SD-ID12 User manual
Zotac
Zotac ZBOX Q Series User manual
Zotac
Zotac ZBOX series User manual
Zotac
Zotac ZBOX series User manual
Zotac
Zotac MEK MINI Series User manual
Zotac
Zotac ZBOX B Series User manual
Zotac
Zotac ZBOX NANO User manual
Popular Desktop manuals by other brands
Epson
Epson Equity 4 specification
IEI Technology
IEI Technology AFL-F08A-N270 user manual
Asus
Asus Portable AiO P1802-T Series user manual
HP
HP VH677UA#ABA - Pavilion Dv6-1244sb... Product specifications
Control Data Corporation
Control Data Corporation CDC 790ICEM owner's manual
Shuttle
Shuttle NC40U Series quick guide