Numark Roxboro Cove User manual

1
ASSEMBLY INSTRUCTIONS
# MS18-301-102-13
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
Questions, problems, missing parts with this product? Do not return to your
retailer, please call our customer service department 9:00 a.m. to 5:00
p.m.Eastern Standard Time Monday through Friday Phone # [phone].
contact us at www.numarkcustomerservice.com.
Roxboro Cove 4 piece Conversation set
ITEM
DON’T RETURN TO STORE

2
WARRANTY
FREIGHT & PACKAGING
Freight and packaging are the responsibility of the original purchaser.
WARRANTY
We warrant our products to be free of manufacturing defects to the original purchaser
for the period listed below. We reserve the right to make substitutions with similar
merchandise,if the model in question is no longer in production.
EXCLUSIONS
This warranty does not cover: Furniture used for commercial or non-residential
purposes; failures caused by improper care; unreasonable or abusive use; freeze
damage; acts of nature. Steel products are not covered against rust. Tempered glass
table tops are not covered against breakage.
FINISH
Frame finish is warranted to be free of manufacturing defects for a period of one (1) year.
Discoloration or fading of the finish as a result of exposure to the elements, chemicals, or
spills is not covered.
FRAMES
Frame is warranted to be free from defects in material or workmanship for a period of
one (1) year for steel frame. This product is made with a steel frame.
ACCESSERY
FABRIC
Fabric is warranted to be free of manufacturing defects for a period of one (1) year.
Discoloration or fading of the finish as a result of exposure to the elements, chemicals, or
spills is not covered.
M1 (34 + 2 spares)
Short Bolt
M2 (4)
Medium Bolt
M4 (44)
Metal Washer
M3 (6)
Long Bolt
M5 (2)
Allen Wrench
DON’T RETURN TO STORE

3
Parts
ASSEMBLY INSTRUCTIONS
1
2
A1 Left Arm
A2 Right Arm
B Chair Back
C Chair Seat
D Chair Connector Bar
H Back Cushion
I Seat Cushion
2
2
2
2
2
2
2
ITEM DESCRIPTION QUANTITY
M1 x 2
Short Bolt
M4 x 2
Metal Washer
Don’t tighten completely.
Repeat procedure for the other side.
M1 x 4
Short Bolt
M4 x 4
Metal Washer
Don’t tighten completely.
Repeat procedure for the other side.
DON’T RETURN TO STORE
A1
A2
B
C
D
H
I
D
A1
A2
B
C
M1
M4
M1
M4

4
ASSEMBLY INSTRUCTIONS
3
4
M1 x 4
Short Bolt
M4 x 4
Metal Washer
Don’t tighten completely.
Repeat procedure for the other side.
Don’t tighten completely.
Repeat procedure for the other side.
Securely tighten all bolts.
M3 x 2
Long Bolt
M4 x 2
Metal Washer
5
Repeat procedure for the other chair.
Putting cushions onto the chair frame.
DON’T RETURN TO STORE
H
I
A2
A1
C
M1
M4
B
A2
A1
M3
M4

5
Parts
ASSEMBLY INSTRUCTIONS
ITEM DESCRIPTION QUANTITY
A1 Left Arm
A2 Right Arm
E Loveseat Back
F Loveseat Seat
G Loveseat Connection Bar
H Back Cushion
I Seat Cushion
1
2
M1 x 2
Short Bolt
M4 x 2
Metal Washer
Don’t tighten completely.
Repeat procedure for the other side.
M1 x 4
Short Bolt
M4 x 4
Metal Washer
Don’t tighten completely.
Repeat procedure for the other side.
1
1
1
1
1
2
2
DON’T RETURN TO STORE
HH
I
A1
A2 E
F
G
I
F
E
G
A2
A1
M1
M4
M1
M4

ASSEMBLY INSTRUCTIONS
3
4
5
M1 x 4
Short Bolt
M4 x 4
Metal Washer
Don’t tighten completely.
Repeat procedure for the other side.
Don’t tighten completely.
Repeat procedure for the other side.
Securely tighten all bolts.
M3 x 2
Long Bolt
M4 x 2
Metal Washer
Putting cushions onto the loveseat frame
6
DON’T RETURN TO STORE
E
F
A2
A1
H
H
II
M1
M4
E
A2
A1
M3
M4

7
Parts
ASSEMBLY INSTRUCTIONS
ITEM DESCRIPTION QUANTITY
1
2
J Tempered Glass Tabletop
K Metal Leg
L Metal center ring
1
2
1
M1 x 4
Short Bolt
M4 x 4
Metal Washer
Don’t tighten completely.
Repeat procedure for the other side and the other leg.
M2 x 4
Medium Bolt
M4 x 4
Metal Washer
Don’t tighten completely.
Repeat procedure for the other side and the other leg.
Securely tighten all bolts and turn it over.
You can twist knobs on the bottom of table leg to adjusting table level as designed.
Your seating is ready for use.
DON’T RETURN TO STORE
K
J
K
M1
M4
L
K
K
M4
M2
J
K
L
K