Numark SS-K-030E User manual

Fairlane 3 piece seating set
ASSEMBLY INSTRUCTIONS
SS-K-030E/3&SS-K-030EB/3
Questions, problems, missing parts with this product? Do not return to your
retailer,please call our customer service department 9:00 a.m. to 5:00 p.m.
Eastern Standard Time Monday through Friday Phone # [phone]
or contact us at www.numarkcustomerservice.com
1
Care and Maintenance
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with exposure to the elements. In case of rust or scratches,
lightly sand the affected area and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.
Wash frames with a mild solution of soap and water; rinse thoroughly. Do not use bleach or solvents.
Do not store anything on tabletop. Use furniture covers or store indoors during cold or inclement weather.

Parts
A
B
C
D
chair frame
seat and back
table top
(Attached 16 bolts and 16 metal washers)
leg
2
2
1
4
Hardware
Eb x 12+1 spare
Long Bolt
Ea x 1 spare
Short Bolt
Ec x12
Metal Washer Allen Wrench
Ed x 1 Ee x 1
Assembly instruction
Do not tighten completely.
Repeat procedure for the other side.
2
Assembly Instructions Sheet
A
B
C
D
D
D
D
A
B
B
A
Eb
Ec
Eb x 6
Long Bolt
Ec x 6
Metal Washer
1

3
Assembly instruction
Now your seating set is ready for use!
Printed in china
Once all bolts are in place, go back and tighten all bolts by using Allen wrench (Ed).
Repeat procedure for the other chair.
Turn over the side table, securely tighten all bolts by using Allen wrench (Ed) in a diagonal pattern.
Do not tighten completely.
Repeat procedure for the other three legs.
C
D
C
D
Ea
Ea
Ea
Ea
Ec
Ec
Ec
Ec
Ea x 16
Short bolt
(Remove from the table top)
Ec x 16
Metal washer
(Remove from the table top)
2
3
Adjust the table level by twisting knobs on the bottoms of the legs.
4