NUTRIBULLET NBP50100 User manual

User guide.
FOOD PROCESSOR

stopped before disassembling
the appliance to remove food.
Always make sure the blades
have come to a stop before
removing the lid.
• Never store the blade
attachments in the bowl
without the lid in place.
Exposed blades can present a
dangerous hazard.
• Do not use this appliance
if any parts appear to be
damaged. If you have any
questions or concerns, please
contact customer service.
• Do not use outdoors.
• Never continuously operate
for longer than one minute
intervals. Allow at least
a minute before starting
another processing cycle.
FEED CHUTE
• Never push food into the feed
chute with your fingers or
utensils. Only use the food
pusher provided. If food
becomes lodged in the feed
chute, ONLY use the food
pusher provided to push it
down. Do not place hand or
fingers into the feed chute.
• Keep hands and utensils
out of the feed chute
and bowl and away from
moving blades or discs while
processing food, to reduce
the risk of severe injury to
persons or property damage.
GENERAL SAFETY
INFORMATION
WARNING! AVOID CONTACT
WITH MOVING PARTS.
Blades and discs are sharp.
Handle carefully.
Do not leave the appliance
unattended when in use.
• Do not overfill the bowl. Make
sure to stay at or below the
LIQUID MAX line when using
liquid ingredients to reduce
the risk of injury or damage to
the machine. Overfilling the
bowl can cause damage to
the bowl or cover and cause
the ingredients to leak.
• Always make sure the unit
is properly and completely
assembled before connecting
to power outlet and
operating. Always make sure
the bowl is securely locked
in place (with lid on and
locked) before the motor is
turned on. Do not attempt
to remove the bowl or lid
while the unit is in operation.
• Do not attempt to defeat the
lid interlock mechanism.
• This appliance is not
intended for use by persons
(including children) with
reduced physical, sensory,
or mental capabilities, or
lack of experience and
knowledge, unless they
are closely supervised and
instructed concerning use of
the appliance by a person
responsible for their safety.
• Close supervision is necessary
when any appliance is used
by or near children. Children
should be supervised to
ensure that they do not play
with the appliance.
• Do not immerse the
appliance, motor base,
cord, or plug in water or
any other liquid.
• Turn motor o and ensure
that all moving parts have
A scraper may be used
BUT ONLY WHEN THE
APPLIANCE IS OFF.
• Do not overload the feed
chute with ingredients.
• When using the food pusher,
never use excessive force
to push food down the
feed chute. Wait until food
naturally moves down the
feed chute and into the bowl
before adding more food.
ELECTRICAL SAFETY
Do not use this product
in locations with dierent
electrical specifications or
plug types. Do not operate
with any type of plug adapter
or voltage converter device,
as these may cause electrical
shorting, fire, electric shock,
personal injury or product
damage. This appliance has
important markings on the
plug blade. The cord is not
suitable for replacement. If
damaged, the appliance must
be replaced.
• Do not modify the plug in
any way.
• Always turn the appliance
OFF and UNPLUG from
the outlet when not in use,
BEFORE assembling or
disassembling parts and
before cleaning.
• To unplug, grasp the plug and
pull from the outlet. Never pull
from the power cord.
!
Save these instructions!
FOR HOUSEHOLD USE ONLY
Important safeguards.
Warning! To avoid the risk of serious injury, carefully read all
instructions before operating your nutribullet®Food Processor. When
using any electrical appliance, basic safety precautions should always
be observed, including the following important information.
WARNING!
32

• Do not let the power supply
cord hang over the edge of a
table or countertop.
• Do not let the power supply
cord touch hot surfaces,
including stove, or become
knotted or tangled.
• This unit has a polarized
plug. To reduce the risk of
electric shock, this plug will
fit into a polarized outlet
only one way. If the plug
does not fit fully inside the
outlet, reverse the plug. If it
still |does not fit, contact a
qualified electrician.
• Regularly inspect the power
cord, plug, and appliance
for any damage. Do not
operate any appliance with
a damaged cord or plug or if
the appliance malfunctions, or
is dropped or damaged in any
manner. Contact Customer
Service for assistance at
1 [phone].
ADDITIONAL
SAFEGUARDS
• Remove and safely discard
any packaging material or
promotional labels before
using the appliance for the
first time.
• Do not put any non-food
items in any of the appliance
pieces, as doing so may
damage the unit and or cause
severe personal injury or
property damage.
• This appliance is not intended
to be an ice crusher.
Attempting to crush ice may
cause permanent damage
to the blades or cause
the unit to malfunction,
resulting in personal injury
or property damage.
• Make sure you have removed
any rind from fruit prior to
adding to the bowl. Do not
use fruits that contain seeds
or pits unless they have been
completely removed.
• Do NOT attempt to use blade,
cup or bowl attachments
from another nutribullet®
or a magic bullet®product
with the nutribullet®Food
Processor. Only use the bowl
and blade attachments that
come with your unit.
• The use of attachments not
recommended or sold by
Capital Brands Distribution,
LLC may cause personal
injury or property damage.
• Ensure that the surface where
the appliance operates is
stable, level, clean, and dry.
• Vibration may occur during
normal operation.
• Any significant spillage
onto the surface under or
around the appliance, or
onto the appliance itself,
should be cleaned and dried
before continuing to use the
appliance.
• When using this appliance,
provide adequate air space
above, below, and on all sides
for circulation.
• Periodically inspect all
nutribullet®components
for damage or wear that
may impair proper function
or present an electrical
hazard. Make sure that the
power cord and plug are
undamaged. Discontinue
use and replace if you
detect damage to the motor
body, work bowl, or any
attachments. Ensure that the
blades rotate freely and that
the structure is undamaged.
Follow the recommended
procedures in the Care
and Maintenance section
of this guide, and never
operate your nutribullet®with
damaged components.
!
• If your nutribullet®
malfunctions in any way,
immediately discontinue use
and contact Customer Service
at 1 [phone]. You may
purchase new nutribullet® ,
attachments, or other parts
at nutribullet.com or by
contacting Customer Service.
• If you have any questions or
comments, or if some aspect
of this user guide is not clear,
please contact Customer
Service for assistance at
1 [phone].
Save these
instructions!
54

Contents.
Thank you for purchasing the nutribullet®Food Processor.
08 What’s included
09 Assembly guide
10 Control panel
11 Assembly & use
11 Before first use
11 Assembly
13 Using the chopping blade
16 Using the dough blade
18 Using a disc attachment
20 Using the dual-size food pusher
21 Troubleshooting
22 Care & maintenance
23 How to store
23 Replacement parts
24 nutribullet®Food Processor
one-year limited warranty
27 Warranty registration
76

spiralizer disc
What’s included. Assembly guide.
motor base
dual-size
food pusher
reversible thin
slice/shred disc
blade adaptor
reversible thick
slice/shred disc
7-cup
work bowl
work bowl lid
with feed chute
chopping blade
OFF LOW HIGH PULSE
7-cup work bowl
OFF LOW HIGH PULSE
Base Unit
spiralizer disc
dough blade
OFF LOW HIGH PULSE
motor base
7 cup
work bowl
dual-size
food pusher
chopping blade
work bowl lid
with feed chute
blade adaptor
CAUTION: Blades are sharp. Handle carefully.
reversible thin slice/
shred disc
reversible thick
slice/shred disc
spiralizer disc
dough blade
98

Before first use.
Before using your nutribullet®Food Processor for the first time,
please take a moment to perform the steps below.
1. UNPACK
Open box. Remove the Motor Base and all attachments. Place all
parts on a flat, dry surface.
2. CLEAN
Rinse all detachable parts and accessories. All parts except the Motor
Base are dishwasher safe, or can be cleaned by rinsing with warm,
soapy water. Clean the Motor Base with a clean, damp cloth.
WARNING: Never submerge the Motor Base in water or any other liquid. See Care
& Maintenance instructions on page 22 for more detailed cleaning instructions.
7-cup work bowl
place the blade adaptor in the work bowl
1Place the Work Bowl on a
clean, dry, flat surface, like
a countertop or table.
Assembly.
Review all warning and caution statements in the Important Safeguards
section (pages 2-5) and above before proceeding to Step 1.
Assembly & use.
The nutribullet®Food Processor features a multi-speed control panel
for all types of food prep.
Control panel.
OFF:
Stops the Food Processor when
operating on continuous LOW or
HIGH speeds.
HIGH:
Continuous HIGH-speed
chopping or mixing.
PULSE:
A burst of chopping or mixing
that runs at HIGH speed.
PULSE must be held to activate;
motion will stop when the
button is released.
LOW:
Continuous LOW-speed
chopping or mixing.
LOW
LOW
LOW
LOW
HIGH
HIGH
HIGH
HIGH
PULSE
PULSE
PULSE
PULSE
OFF
OFF
OFF
OFF 2Place the Blade Adaptor in
the Work Bowl. Lower the
Blade Adaptor onto the top
of the shaft located in the
center of the Work Bowl.
Push down so the adaptor is
firmly and securely in place.
1110

3a If using the Chopping Blade
or Dough Blade: Hold the
plastic center of the blade,
and carefully place it on
top of the Blade Adaptor.
Slide the blade down until
it reaches the bottom of the
Work Bowl. Press it down
firmly to set it in place.
CAUTION: Blades are sharp!
Handle carefully. Keep fingers
away from the blade’s sharp
edges. Always hold blades by
grasping the plastic areas.
4If using the Spiralizer disc
attachment: Align the
notches on the Spiralizer
Disc with the tabs that are
located inside the Work
Bowl towards the top. Once
the disc is properly seated
on the Blade Adaptor and
inside of the Work Bowl,
3b If using a Slice/Shred disc
attachment: The disc
attachments can be placed
in 2 dierent positions on the
Blade Adaptor. The lower
position is for storage, and
the higher position is for use.
Hold the center knob of the
disc, and carefully place it on
the Blade Adaptor. Align the
markings on the disc
with the markings on the
Blade Adaptor, so that the
lines connect. If the disc
appears to be in the lower
position, remove the disc and
rotate until the markings line
up and the disc sits in the
higher position.
CAUTION: Blades are sharp! Handle
carefully. Keep fingers away from
the blade’s sharp edges. Always hold
blades by grasping the plastic areas.
3a If using the Chopping Blade
3a If using the Chopping Blade
2 Prepare food (cut into smaller pieces, remove seeds, etc.)
3c If using the Spiralizer disc
3b If using a Slice/Shred
turn the Spiralizer Disc so
that the 'FRONT' is aligned
with the front of the Motor
Base. The spiralizer part
of the disc will sit directly
under the Feed Chute.
CAUTION: Never run the motor
with more than 1 blade attached.
1Place the Work Bowl, with
the Chopping Blade
attached, on a clean, dry,
flat surface like a
countertop. Refer to the
assembly instructions
on page 12 for how to
properly attach the
Chopping Blade.
2Prepare food (cut into
smaller pieces, remove
seeds, etc.) and place into
the Work Bowl. Do not
overload bowl with food.
If you are using liquid
ingredients do not fill past
the LIQUID MAX line.
NOTE: Make sure the Chopping
Blade has been attached to the
Work Bowl BEFORE adding
food to the bowl.
Using the chopping blade.
The Chopping Blade is a versatile blade that can be used to chop,
mix, mince, or purée foods.
thin/thick shred disc
1312

4Place the Work Bowl, with
lid attached, onto the
Motor Base. Turn the bowl
clockwise to lock into place.
You should hear a click
when the bowl is properly
locked into place.
3Place the Work Bowl Lid
on top of the Work Bowl.
Turn the lid clockwise, lining
up the arrows on the lid and
handle, to lock into place.
Place the Dual-Size Food
Pusher into the Feed Chute.
NOTE: The motor will not run unless
the lid is locked into place.
5bIf you need to add liquid
while processing, unlock
the Inner Pusher by
turning the Pusher Cap
clockwise. Once unlocked,
lift the Inner Pusher and
drizzle liquid through the
narrow chute.
NOTE: Do not fill liquid ingredients
past the LIQUID MAX line.
5aPlug in the unit, then press
your desired speed to
start processing food. The
blue light will illuminate
over the speed that is
currently running.
HIGH PULSEOFF LOW
6When you’re done, press
the OFF button. Wait until
the Chopping Blade has
come to a complete stop.
Remove the Work Bowl
by turning the handle
counterclockwise to unlock
it from the Motor Base. Lift
the bowl up o the base
and set it on a flat surface.
7Remove the Work Bowl
Lid from the Work
Bowl by turning the lid
counterclockwise to unlock.
Carefully remove the lid
and set it aside.
OFF LOW HIGH PULSE
8Carefully remove the
Chopping Blade and the
Blade Adaptor from the Work
Bowl and set them aside.
CAUTION: Blades are sharp! Handle
carefully. Keep fingers away from
the blade’s sharp edges. Always hold
blades by grasping the plastic areas.
9Remove your food from the
Work Bowl using a spatula
or spoon. Dispose of any
leftover food in the bowl,
then clean the bowl, blades,
and other parts to avoid
food residue buildup.
OFF LOW HIGH PULSE
1514

3Refer to the instructions
on page 14 for attaching
the Work Bowl Lid and the
Work Bowl to the Motor
Base.
4bLOW: Use LOW speed for
all dough making. Using
a lower speed will help
to avoid overworking the
dough which can lead to
a tough dough. If dough
is cold and not overly
blended, it will remain flaky.
4aAfter plugging in the unit,
press your desired speed to
start processing food. The
blue light will illuminate
over the speed that is
currently running.
OFF LOW HIGH PULSE
4cPULSE: Use PULSE to cut
butter into flour before
switching to LOW speed
for mixing and kneading
the dough.
NOTE: We do not recommend
using HIGH speed as it will over
work the dough, and the dough
will become tough.
1Place Work Bowl, with
Dough Blade attached,
on a clean, dry, flat surface
like a countertop. Refer to
the assembly instructions
on page 12 for how to
properly attach the
Dough Blade.
2Prepare food, ensuring to
chop ingredients like butter
into small chunks, and
place into the Work Bowl.
Do not overload the bowl
with food. If you are using
liquid ingredients do not fill
past the LIQUID MAX line.
NOTE: Make sure the Dough Blade
has been attached to the Work Bowl
BEFORE adding food to the bowl.
Using the dough blade.
The Dough Blade can be used for combining ingredients to make
dough for pie crusts, pizza, bread, and more!
OFF LOW HIGH PULSE
OFF LOW HIGH PULSE
5If you need to add liquid
while processing, unlock
the Inner Pusher by turning
the Pusher Cap clockwise.
Once unlocked, lift the
Inner Pusher and drizzle
liquid (like ice water)
through the narrow chute.
Process just long enough to
bring dough together in a
loose ball.
NOTE: Do not fill liquid ingredients
past the LIQUID MAX line.
6Refer to the instructions
on page 15 for removing
the Work Bowl from the
Motor Base once dough
has reached your desired
consistency and you are
done mixing.
2 Prepare food (cut into smaller pieces, remove seeds, etc.)
1716

1Place the Work Bowl, with
disc attached, on a clean,
dry, flat surface like a
countertop. Refer to the
assembly instructions on
page 12 for how to properly
attach a disc for use.
2Place the Work Bowl Lid on
top of the Work Bowl. Turn
the lid clockwise, lining up
the arrows on the lid and
handle, to lock into place.
NOTE: The motor will not run
unless the lid is locked in place.
Using a disc attachment.
The disc attachments are for slicing, shredding, or spiralizing your
ingredients. The Slice/Shred Discs are reversible and labeled on
either side. Place the side you want to use with its name facing up.
4Prepare food (cut into
smaller pieces, remove
seeds, etc.) and set aside.
3Place the Work Bowl, with
lid attached, onto the Motor
Base. Turn the Work Bowl
clockwise to lock in place.
You should hear a click when
the bowl is properly locked
in place.
NOTE: When using the Spiralizer
Disc,cut the produce into pieces
that will easily fit in the chute. We
recommend to cut foods vertically
along the sides creating a 'square'
shape for best spiralizing results.
6With the motor running,
place food into the Feed
Chute, carefully guiding it
down using the Food Pusher.
7When you’re done, or when
your processed ingredients
have filled the work bowl,
press the OFF button. Wait
until the blade has come to
a complete stop.
8Remove the Work Bowl
Lid from the Work Bowl
by turning the lid
counterclockwise to unlock.
Carefully remove the lid
and set it aside.
5Plug in the unit and press
the HIGH speed button.
HIGH PULSEOFF LOW
OFF LOW HIGH PULSE
WARNING: always use the Food
Pusher, not fingers or utensils,
to push food down chute. Do
not insert too much food at one
time. Never force stuck food
down chute.
1918

9Carefully remove the Disc
Blade and Blade Adaptor
from the bowl and set
them aside.
10 Remove your food from the
Work Bowl using a spatula
or spoon. Dispose of any
leftover food in the bowl,
then clean the bowl, blades,
and other parts to avoid
food residue buildup.
Using the
dual-size
food pusher.
The Dual-Size Food Pusher
features a smaller pusher inside
a larger one. Use the Full-Sized
Pusher for guiding bigger
pieces of food down the Feed
Chute — like when shredding
lettuce or a big block of cheese.
Unlock the Inner Pusher to
create a more narrow Feed
Chute, and use the Inner Pusher
for better control with thinner
ingredients, such as zucchini or
carrots. The narrow Feed Chute
is also ideal for drizzling
in liquids during processing.
OFF LOW HIGH PULSE
OFF LOW HIGH PULSE
CAUTION: Blades are sharp!
Handle carefully. Keep fingers
away from the blades sharp edges.
Always hold blades by grasping the
plastic areas.
HIGH PULSEOFF LOW
Separate the Inner Pusher from
the outer pusher piece by
gripping the circular Pusher
Cap. Twist the top of the pusher
clockwise and lift the Inner
Pusher from the outer piece.
Troubleshooting.
PROBLEM
Unit does not power on.
SOLUTIONS
Make sure the Power Cord
is plugged into an electrical
outlet, and that outlet has
power.
Make sure the Work Bowl Lid is
locked into place on top of the
Work Bowl. The arrow on the lid
and handle should line up when
properly locked in place. If the
lid becomes unlocked at any
time while the motor is running,
the unit will stop running and
the blue lights around the
buttons will flash.
Make sure the Work Bowl is
locked into place on the Motor
Base. When placing the Work
Bowl on the Motor Base, turn
the handle clockwise until you
hear a click – indicating that the
bowl is properly locked in place.
PROBLEM
The Food Processor stopped in
the middle of processing, and
the control panel lights flashed
three times.
SOLUTIONS
You have exceed 10 minutes
of continuous running time.
Unplug the Food Processor and
keep the unit o for 15 minutes
before continuing use.
PROBLEM
Feed Chute is blocked.
SOLUTIONS
If you notice that a piece or
cluster of food appears to
be stuck in the Feed Chute,
blocking food flow, turn the
motor OFF. Unlock the Work
Bowl Lid from the Work Bowl,
and use the Food Pusher, a
spatula, or spoon to remove the
stuck food before reassembling.
If the Work Bowl is nearly full
of food, that may stop the flow
of food down the Feed Chute.
If the food has reached to just
below the disc attachment,
you’ll need to empty the bowl
before processing more food.
Turn the motor OFF, wait until
the blades have come to a
complete stop and disassemble
the unit to empty the Work Bowl.
2120

STEP 1:
The most important thing — ALWAYS
POWER OFF THE UNIT and UNPLUG
the Motor Base from the power
outlet when it is not in use.
NOTE: Do not attempt to handle the
appliance until all parts have stopped
moving! This includes during assembly
and disassembly, while changing
accessories, during cleaning, and any
time you leave the machine unattended
STEP 2:
Detach the blades and other
attachments from the Motor Base.
STEP 3:
Clean the individual components
as recommended in the following
sections.
MOTOR BASE:
• To avoid risk of injury, NEVER
attempt to clean the actuator
system on the Motor Base while
the unit is plugged in.
• Do not attempt to remove any
pieces from the Motor Base.
• Use a sponge or dish cloth
dampened with warm soapy
water to wipe down the Motor
Base until clean.
• If necessary, you may use a
small brush to scrub the
actuator system area to ensure
it’s clean.
Cleaning the nutribullet®Food Processor is quick and easy. All
detachable parts (Blade Adaptor, Chopping Blade, Dough Blade, Slice/
Shred Discs, Spiralizer Disc, Work Bowl, Work Bowl Lid, and Dual-Size
Food Pusher) are TOP RACK dishwasher-safe. The Motor Base can be
quickly hand-washed with a damp cloth. Read on for best practices.
Care & maintenance.
• To clean leakage residue from
the Motor Base, wipe with a
damp sponge and warm water.
WARNING: Never submerge the
Motor Base in water.
ALL DETACHABLE PARTS:
WARNING: Blades are sharp!
Handle all blade attachments with
care when cleaning!
• The Blade Adaptor, Blade
Attachments, Work Bowl,
Work Bowl Lid, and Dual-Size
Food Pusher are all TOP RACK
dishwasher-safe. These parts
may also be cleaned by hand
with warm soapy water.
• We recommend cleaning all
removable parts after each use
to reduce the buildup of residue.
WARNING: NEVER use the sanitize
cycle — heat this high can warp
the plastic.
WARNING: Do not clean the
Work Bowl, Work Bowl Lid, or other
parts of the appliance with steel
wool pads/balls or other hard
material that might scratch your
Food Processor.
The blade attachments conveniently store within the Work Bowl when
not in use. Make sure the unit is powered o and unplugged before
placing attachments in the Work Bowl for storage. Read on for details:
How to store.
the Slice/Shred Discs. When storing
the Spiralizer Disc, align the notches
on the Spiralizer Disc with the tabs
that are located inside of the Motor
Base towards the top. Ensure the
disc is properly seated on the blade
and adapter, inside of the Motor
Base, and turn the Spiralizer Disc so
that the 'FRONT' is aligned with the
front of the Motor Base.
STEP 5:
Place the Work Bowl Lid onto the
Work Bowl and lock into place, with
the Dual-Size Pusher nestled in the
Feed Chute.
NOTE: The power cord wraps under the
bottom of the Motor Base – keeping it
neatly tucked away when stored.
Replacement parts.
To order additional parts and accessories, please visit our website
at nutribullet.com/shop/accessories or feel free to contact
Customer Service: 1 [phone].
NOTE: All included blades and discs will
not store in the work bowl together, you
will have two storage options:
OPTION 1: Chopping Blade, Dough
Blade, 2 Slice/Shred Discs
OPTION 2: Chopping Blade, Dough
Blade, 1 Slice/Shred Disc, Spiralizer Disc
STEP 1:
Place the Blade Adaptor on the
center shaft.
STEP 2:
Lower the Chopping Blade onto
the Lower the Chopping Blade onto
the blade shaft, and then lower the
Dough Blade onto the blade shaft
so that it sits above the Chopping
Blade on the shaft.
STEP 3:
Lower the disc attachments onto
the adaptor, on top of the Chopping
Blade. In storage mode, the discs
should sit in the lower position on the
adaptor than when used in normal
operation. In storage mode, the lines
on the disc will NOT be aligned with
the lines on the adaptor.
STEP 4:
The Spiralizer Disc should be the
last disc stored, if storing with one of
2322

nutribullet®Food Processor
one-year limited warranty.
LIMITED WARRANTY
FOR NUTRIBULLET®
nutribullet's limited warranty
obligations are confined to the
terms set forth below:
nutribullet, LLC (“nutribullet”)
warrants this nutribullet®
against defects in materials
and workmanship for a period
of one year from the date of
original retail purchase. This
limited warranty is valid only in
the country in which the product
is purchased and comes with
the product at no extra charge,
however, shipping and processing
fees will be incurred for returns,
replacements and or refunds.
If a defect exists and nutribullet®
is obligated under this
limited warranty, at its option
nutribullet®will (1) repair the
product at no charge, using
new or refurbished replacement
parts, (2) exchange the product
with a product that is new or
that has been manufactured
from new or serviceable used
parts and is at least functionally
equivalent to the original
product, or (3) refund the
purchase price of the product. A
replacement product assumes
the remaining warranty of the
original product. A repaired
product has a one-year
warranty from the date of
repair. When a product or part
is exchanged, any replacement
item becomes your property
and the replaced item becomes
nutribullet’s property. When a
refund is given, your product
becomes nutribullet’s property.
OBTAINING WARRANTY SERVICE
For limited warranty service,
simply call our customer service
department at 1 [phone]
or contact us via email from
our website at nutribullet.com;
click the Contact Us link, fill
out and submit the customer
contact form, and we will be
glad to help you. When you
contact our customer service
department, you will be asked
to provide your name, address,
telephone number, and proof of
the original purchase (receipt)
containing a description of the
product(s), purchase date, and
the appropriate nutribullet®serial
number(s). Before sending your
product for limited warranty
service, please make sure to
keep a copy of all relevant
documents for your files (receipt,
etc.). It is always recommended
to purchase product insurance
and tracking services when
sending your product for service.
Remember, shipping and
processing fees will be incurred
and are not covered by the one-
year limited warranty.
EXCLUSIONS & LIMITATIONS
This nutribullet®one-year
limited warranty applies
only to nutribullet®products
distributed by or for nutribullet
that can be identified by the
“nutribullet” trademark, trade
name, logo, and bar code. This
nutribullet®Food Processor,
one-year limited warranty
does not apply to any other
products that may appear to
be authentic, but were not
distributed/sold by nutribullet.
Normal wear and tear is not
covered by this limited warranty.
This limited warranty applies
to consumer use only, and
is void when the product
is used in a commercial or
institutional setting.
This limited warranty extends
only to the original consumer
purchaser and is not
transferable. In addition, proof of
purchase must be demonstrated.
Repair or replacement of
the product (or, if repair or
replacement is not feasible, a
refund of the purchase price)
is the exclusive remedy of the
consumer under this limited
warranty. nutribullet shall not
be liable for any incidental or
consequential damages for
breach of this limited warranty
or any implied warranty on
this product.
This limited warranty gives
you specific legal rights, and
you may also have other rights
which vary from state to state.
nutribullet is not liable for any
damage to products not covered
by this warranty (e.g., cups,
book, User Guide).
This limited warranty does not
apply: (a) to damage caused
by accident, abuse, misuse,
or misapplication; (b) to
damage caused by improper
maintenance (including
unauthorized parts service); (c)
to a product or a part that has
been modified in any way; (d) if
any nutribullet®serial number
or trademark has been removed
or defaced; and/or (e) if the
product has been used with an
adapter/converter.
2524

THIS LIMITED WARRANTY
AND THE REMEDIES SET
FORTH ABOVE ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER
WARRANTIES, REMEDIES
AND CONDITIONS, WHETHER
ORAL OR WRITTEN, EXPRESS
OR IMPLIED. NUTRIBULLET
SPECIFICALLY DISCLAIMS ANY
AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT
LIMITATION, WARRANTIES
OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE. IF NUTRIBULLET
CANNOT LAWFULLY DISCLAIM
IMPLIED WARRANTIES UNDER
THIS LIMITED WARRANTY,
ALL SUCH WARRANTIES,
INCLUDING WARRANTIES
OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED IN
DURATION TO THE DURATION
OF THIS LIMITED WARRANTY.
No nutribullet®reseller, agent, or
employee is authorized to make
any modification to this warranty.
NUTRIBULLET IS NOT
RESPONSIBLE FOR DIRECT,
SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES
RESULTING FROM ANY
BREACH OF WARRANTY
OR CONDITION, OR UNDER
ANY OTHER LEGAL THEORY,
INCLUDING BUT NOT LIMITED
TO LOST PROFITS, DOWNTIME,
GOODWILL, DAMAGE TO
OR REPLACEMENT OF
EQUIPMENT AND PROPERTY.
NUTRIBULLET SPECIFICALLY
DOES NOT REPRESENT THAT
IT WILL BE ABLE TO REPAIR
ANY PRODUCT UNDER THIS
LIMITED WARRANTY.
Some states and provinces
do not allow the exclusion
or limitation of incidental or
consequential damages or
exclusions or limitations on the
duration of implied warranties
or conditions, so the above
limitations or exclusions may not
apply to you. This warranty gives
you specific legal rights, and you
may also have other rights that
vary by state or province.
Warranty registration.
Please visit nutribullet.com/
shop/accessories or call
1 [phone] to register
your new nutribullet®Food
Processor. You will be asked to
enter the Serial Number*
of your product, along with
the purchase date and place
of purchase.
The registration will enable us to
contact you in the unlikely event
of a product safety notification.
By registering your product, you
acknowledge you have read
the instructions and understood
the warnings as set forth in the
accompanying instructions.
12345678910110
How to find serial number
under the Motor Base.
2726

Capital Brands Distribution, LLC | nutribullet.com | All rights reserved.
nutribullet®and the nutribullet logo are trademarks of CapBran Holdings, LLC
registered in the U.S.A. and worldwide.
Illustrations may dier from the actual product. We are constantly striving
to improve our products, therefore the specifications contained herein
are subject to change without notice.
210817_NBP50100