NXP Semiconductors MIMXRT1064-EVK User manual

Quick Start Guide
i.MX RT1064 Evaluation Kit

LCD Interface
Touch Interface
2
GET TO KNOW THE i.MX RT1064 EVK
Quick Start Guide
Figure 2: Back side of MIMXRT1064-EVK
Figure 1: Front side of MIMXRT1064-EVK
Power Reset
Boot Mode
Select Switch
Debug USB
i.MX RT1064
Audio Jack
Camera
Interface
Ethernet
POR
Reset
ON/
OFF
USB
Host
USB
OTG
JTAG
Arduino Interface
User Button
SDRAM
TF Socket for
SD Card
Hyper Flash
Arduino Interface
QSPI Flash
DC IN:5V
Power Switch

3
www.nxp.com
HOW TO GET STARTED
1
The evaluation kit shipped with an
MIMXRT1064-EVK Board, a camera
and a USB Cable(Micro B). Ensure
the items are available in the i.MX
RT1064 evaluation kit
2
Connect the MIMXRT1064-EVK board
to a PC using the included micro USB
cable to USB connector J41.
The MIMXRT1064 EVK Board comes
preprogrammed with a demo which
flashes the LED on the board.
3
Explore more out-of-box demos and
download software and tools on
www.nxp.com/MIMXRT1064-EVK/
startnow.
4
Enjoy your design freedom with the
MIMXRT1064-EVK.

SUPPORT
Visit www.nxp.com/support for a list
of phone numbers within your region.
WARRANTY
Visit www.nxp.com/warranty for
complete warranty information.
www.nxp.com
NXP, the NXP logo and Kinetis are trademarks of NXP B.V. All other product or service names are the
property of their respective owners. © 2018 NXP B.V.
Document Number: IMXRT1064QSG REV 0
Agile Number: 926-32221 REV A
Get Started
Download installation
software and documentation
under “Jump Start Your Design”
at www.nxp.com/MIMXRT1064-EVK.