O.S. engine Max-BGX-1 Ring User manual

•
INSTRUCTIONS FOR MAX-BGX-1 RING REMOTE NEEDLE VERSION ENGINES
It is of vital importance, before attempting to operate
your engine, to read the general 'SAFETY INSTRUC-
TIONS AND WARNINGS' leaflet enclosed. Also, please
study the entire contents of the instruction manual
enclosed, so as to familiarize yourself with the con-
trols and other features of the engine.
This 'RN' version of the MAX-BGX-1 RING is fitted, as standard,
with a 'remote' needle-valve, mounted at the back of the engine,
safely distanced from the propeller. This device was origonated
by OS several years before being adopted by a number of other
manufacturers.
BEFORE INSTALLING THE ENGINE
Connect the needle-valve to carburettor jet nozzle with silicone
tubing supplied. In the event of the tubing becoming damaged,
it should be replaced with 78mm length of 5mm ODX2mm ID
silicone tubing.
The specifications are subject to alteration for improvement without notice.
PARTS LIST(CARBURETTOR)
"O" Ring
Carburettor Rotor
Carburettor Body
Venturi Insert
Rotor Spring
Code No.
Throttle Lever Assembly
Carburettor Rubber Gasket
Fuel Inlet
Description
Rotor Guide Screw
Mixture Control Screw Assembly
Description Code No.
PARTS LIST
Description
Drive Hub
Connecting Rod
Woodruff Key
Crankshaft
Crankcase
Propeller Lock Nut Set
Piston Pin
Piston Pin Retainer(2pcs.)
Cover Plate Fuel Outlet
Piston Ring
Cylinder Head
Cylinder Liner
Piston Remote Needle Valve Assembly
Needle
"O" Ring
Screw Set
Gasket Set
Set-screw
Glow Plug No.8
Ratchet Spring
Plug Screw
E-5010 Silencer Assembly
Code No.
Crankshaft Ball Bearing (Front)
Remote Needle Valve Bracket(BGX-1)
Carburettor Complete(Type 8AA-RN)
Description Code No.
Crankshaft Ball Bearing (Rear)
TEL. [phone]
FAX. [phone]
6-15 3-chome Imagawa Higashisumiyoshi-ku
Osaka 546-0003, Japan.
Copyright 1998 by O.S. Engine Mfg. Co., Ltd. All rights reserved. Printed in Japan.
C
•Fit the remote needle to the attachment bracket as shown in
the photo.
•
27881820
28281400
24925202
22681953
29315000
28281200
29381100
28281600
29381300
28281210
28281500 Carburettor Fixing Screw
29308000
29305000
29208200
29302000
29301000
29310100
29306000
29317000
29307000
29303400
29304000
29303100
29303200
29313000
29314000
46231000
29330000
28282000
28281970
24981837
46181950
71704230
26381501
26711305
22881950
29383010
71608001
29025000
29320000
71919000
Thrust Washer
Backplate Mount
Beam Mount
Backplate Mount
When beam-mounting the engine in the model, bolt the engine
to the bearers along with the attachment bracket. Please refer
to the INSTALLATION section of the engine instructions when
installing the engine.
Remote Needle
Silicone Tube
Remote Needle Valve Bracket