
2
1. Remove all parts from the carton.
2. Aach the red handle: Thread the screws through the boom of the bench into the handle, and ghten it.
3. Aach the rubber grips: Thread the screws through the top of the bench to the rubber grips underneath the bench.
Don’t ghten the screw so the rubber grips can be moved
4. Place the bench in the bathtub with the red handle on the outside. The handle supports user to get into and out of the
bathtub.
Move the rubber grips within the adjustment gaps against the side of the bathtub, and ghten the screws.
Please make sure the grey rubber side faces the side where it makes contact to the bathtub. This will prevent your
bench from sliding bathtub from scratches.
5. Make sure the bench is secure before each use.
Model No.: MU-5230
Name: Shower Bench
Material: ABS and rubber
Size: 32 x 71 x 19cm/ 12.5 x 27.9 x 7.4 inches
Max. Capacity: 135 kg/ 300 lbs
Color: White
ASSEMBLY AND HOW TO USE
SPECIFICATION
CARE AND STORAGE INSTRUCTION
LIMITED LIFETIME WARRANTY
- Inspect the bench and the rubber grips for wear and damage regularly.
- Use mild soap and water soluon to clean the bench. Rinse with clean water and dry with so cloth. Do not use
abrasive cleaners to any part of the bench.
- Store in cool and dry place if not in use. Long exposure to direct sunlight and heat may damage the rubber accessories.
This warranty is extended only to the original purchaser/ user of our product.
ObboMed warrants the frame to be free of defects in materials and workmanship for the lifeme of the product. In the
event of a defect covered by this warranty, we will, at our opon, repair or replace the device.
This warranty does not cover device failure due to owner’s misuse or negligence, or normal wear.
The warranty does not extend to non-durable components, such as rubber accessories, casters, and grips, which are
subject to normal wear and need periodic replacement. No guarantee is provided when the product is not installed/
operated according to this manual, used for other purposes or careless use of the product.
For repair and warranty processing, please include the following documents when you send in the product:
• A copy of the receipt with purchasing date.
• A reason for the claim or descripon of the fault.
DISPOSAL
Disposal of packing and product aer end of lifeme.
Deliver all packing materials at a collecon point or in the appropriate bins for recycling. For further queson please
contact local recycling office.
Technical specificaons are subject to change without noce.
Distribuon & Service
Distribuon by ObboMed Group:
Webshop: www.obbomed.com
Europe:
Morseweg 11, 8503 Ah Joure
The Netherlands
Australia:
39/3 Kelso Crescent Moorebank,
NSW 2170, Australia
United States:
1210 E Lexington Ave,
Pomona, CA 91766, U.S.A.
ObboMed® is registered trade mark of ObboMed Group.