ObboMed MU-2010 User manual

1
Mounng Flange
Armrest
Leg Extension
Your healthy living center
www.obbomed.com
Toilet Safety Frame
Model No.: MU-2010
Please carefully read through this manual before first use, and store it in safe place.
If you pass the product to another person, hand over this manual along with it!
IMPORTANT SAFETY INSTRUCTION
OVERVIEW
Failure to follow the above instrucons may result serious bodily injuries.
ObboMed assumes no responsibility for any damage or injuries caused by wrongful installaon, assembly, or use of
this product.
- Consult your physicians or doctors before use.
- This product is suitable to be used in private places or at home.
- This product is intended to be used indoor only.
- The maximum capacity of this safety frame is 115kg/ 250 lbs.
- This product requires checking and reghtening on regular bases. Always ensure the safety frame is secured and stable
before applying weight to it.
- The safety frame is designed to provide assistance when geng on and up from the toilet. Do not use the frame to
support full body weight, as this may result bodily injuries.
All below informaon serves to ensure the safety of user, read before use.
Please follow the instrucons below.

2
- Inspect the safety frame for wear and damage regularly.
- Use mild soap and water soluon to clean the safety frame. Rinse with clean water and dry with so cloth. Do not use
abrasive cleaners to any part of the product.
- Store in cool and dry place if not in use. Long exposure to direct sunlight and heat may damage the rubber accessories.
- Do not make aempts to repair the product.
- Please bring the product to the dealer or the service center.
- Be careful when handling the product in order to avoid damage to the equipment.
- Check regularly and stop using if damage is present.
SPECIFICATION
ASSEMBLY AND HOW TO USE
Please read all instrucons below before installing the product.
1. Detach the toilet seat by removing the toilet seat bolts.
2. Place the frame mounng flange on the toilet and align the holes.
3. Place the toilet seat and align the holes, and use the bolts to secure both the toilet seat and the mounng flange.
4. Slide the side frames into the mounng flange, and secure them with the snap buons. An audible ‘click’ will be heard
when the frame is locked.
5. Slide the leg extension into the side frames and set the height, the legs of the frame should be in contact with the floor.
6. Adjust the width with the adjustment holes on the mounng flange.
7. Make sure all snap buons are secured before use.
Always test the stability of the safety frame before use.
Flange
Model No.: MU-2010
Name: Toilet Safety Frame
Material: Aluminum
Size: Fits most toilet seat
Weight Capacity: 115kg/ 250 lbs
CARE AND STORAGE INSTRUCTION
Technical specificaons are subject to change without noce.

3
Distribuon by ObboMed Group:
Webshop: www.obbomed.com
Europe:
Morseweg 11, 8503 Ah Joure
The Netherlands
Mail: [email protected]
United States:
1210 E Lexington Ave,
Pomona, CA 91766, U.S.A.
Mail: [email protected]
Australia:
39/3 Kelso Crescent Moorebank,
NSW 2170, Australia
Mail: [email protected]
ObboMed® is registered Trademark of ObboMed Group.
DISTRIBUTION & SERVICE
LIMITED LIFETIME WARRANTY
This warranty is extended only to the original purchaser/ user of our product.
ObboMed warrants the frame to be free of defects in materials and workmanship for the lifeme of the product. In the
event of a defect covered by this warranty, we will, at our opon, repair or replace the device.
This warranty does not cover device failure due to owner misuse or negligence, or normal wear. The warranty does not
extend to non-durable components, such as rubber accessories, casters, and grips, which are subject to normal wear and
need periodic replacement. No guarantee is provided when the product is not installed/ operated according to this
manual, used for other purposes or careless use of the product.
For repair and warranty processing, please include the following documents when you send in the product:
• A copy of the receipt with purchasing date.
• A reason for the claim or descripon of the fault.
DISPOSAL
Disposal of packing and product aer end of lifeme.
Deliver all packing materials at a collecon point or in the appropriate bins for recycling. For further queson please
contact local recycling office.