OBD HOSTPOWER
OBD HOST
POWERBT
'Connect'
button
Android Quick Start Guide
OBDLink MX Bluetooth
Android
Scan the QR code or visit the URL from your Android
device to download the OBDLink app:
obdlink.mx/app
Download & install OBDLink app
The DLC is usually found on the driver’s side, under
the dash.
– Can’t nd your DLC? Visit dlc-locator.com
‘POWER’ LED will turn ON, and the ‘BT’ LED will
start ashing slowly.
You must complete steps 7, 8, and
9 within 2 minutes. If you need
more time, press the button again.
Attention!
The ‘BT’ LED will switch to a fast blink.
Tap ‘Scan’ if OBDLink MX does not show in Avail-
able devices.
– LEDs are o? Check vehicle for blown fuses.
[instructions continue on reverse]
Plug MX Bluetooth into the diagnostic
link connector (DLC)
Turn ignition to Key On, Engine O
position
Open ‘Settings’ app, and enable
‘Bluetooth’
Press the‘Connect’ button on MX
Tap ‘OBDLink MX’ to pair the deviceTap ‘Bluetooth - Pair with a device’
Wait for OBDLink MX to appear on
the ‘Available devices’ list
1
2
3
4
6
85
7
