Obihai OBi Series Operation instructions

This tutorial guides you through setting up your OBiWiFi5G Wireless Adapter with the OBi IP
Phone.
Setting up the OBiWiFi5G dongle may require your OBi device to run the latest firmware. If you are
having trouble configuring the OBiWiFi5G dongle, there is a good chance your OBi device's firmware
needs to be updated.
Updating the OBi firmware is simple:
1. Log in to your OBiTALK account and check whether there is a yellow exclamation icon
next to your OBi number. The yellow exclamation icon indicates that a new
firmware is available for the OBi device.
2. Click on the yellow exclamation icon to update the OBi device.
If you have any issue on the firmware update, please email [email protected] with your 9
digit OBi number to get help with firmware update for the OBiWiFi5G dongle connectivity.
If you have a OBi300/OBi302/OBi200/OBi202, scroll down or click here for the instructions.
Connect the power adapter to the OBi IP phone
Insert the OBiWiFi5G dongle in the USB port 1 on the back of the phone
Refer to the screenshots below to connect OBi Phone with your WiFi network:
1. Select Settings on the phone screen
2. Select OBiWiFi
3. Click on “Scan” (bottom right of the screen)
4. Select the WiFi network you would like to connect to
5. Click on “Connect” to enter your network password
6. Enter the WiFi password if required

You will see a WiFi icon (see screenshot below) on top of the screen once OBi Phone is
successfully connected to your WiFi network. Dial **9 222 222 222 to verify if the OBi is able
to reach out to the internet.
OBiWiFi5G Setup - OBi300/OBi302/OBi200/OBi202
This tutorial guides you through setting up your OBiWifi5G Wireless Adapter with the
OBi300/OBi302/OBi200/OBi202.
Step 1: Connect the OBiWiFi5G adapter to the OBi3xx or OBi2xx USB port and power on the
OBi device.

Step 2: Check if the OBiWiFi5G dongle has a blinking BLUE light. The OBiWiFi5G dongle
MUST show a blinking blue light in order to proceed with the setup. If you do not see a blinking
blue light, please do the following:
1. Unplug and reinsert the OBiWiFi5G dongle again.
2. Power cycle the OBi2xx/OBi3xx device.
3. If you still do not see a blinking blue light on the OBiWiFi5G, please contact our Support
Team.
Step 3: Only required for the OBi202. Please skip to step 4 for all other devices.
1. Dial ***0 from the phone connected to the OBi202
2. Enter 30#
3. Press 1 to Enter a New Value
4. Press 1# to Enable
5. Press 1 to Save
Step 4*: From a WiFi enabled device, e.g. computer, tablet or smart phone, open its network
settings and connect to a WiFi network called “OBiWiFi_Setup.” Your browser-equipped
device will automatically connect to the OBiWiFi_Setup network.
Note: If you do not see the network, dial *27 on a phone connected to the OBi.
Step 5: Wait 30 seconds. Then, open a browser window and visit http://192.168.10.1/wifi or try
http://obiconnect.com/wifi.
When prompted, enter a username and password to access the configuration webpage.
The default username is: admin
The default password is: admin
If you have previously changed your OBi2xx/3xx Webpage Admin Password, log-in to the
www.OBiTALK.com portal, select your OBi2xx/3xx from the Dashboard and retrieve the
password.

Step 6: Next, you will see a screen allowing you to select your WiFi Network Name (SSID)
from a drop down list and (if necessary), a WiFi Network Password. Click the Connect button to
complete the setup. If the SSID is not on the drop down list, choose Other network, and enter
the SSID of your wireless router. If you do not know the security mode, leave it as Auto and OBi
will automatically detect the security mode for you.
Allow 30 seconds for the OBiWiFi5G adapter to connect to the your wireless network. If
successful, the OBi's power LED should turn from blinking green to steady green.
Note: You can also verify if OBiWiFi5G is working properly by checking if the OBi device has
acquired a valid IP address (dial ***1 to listen to the IP address).