Obihai OBi100 User manual

- 1 -
Detailed Technical Specifications
OBi100 VoIP Telephone Adapter & Voice Services Bridge
with Support for Two (2) SIP and OBiTALK VoIP Services
With the OBi100, you are in control of your digital & analog communications life. Via the OBi100’s on-board
connections as well as via the Internet to other OBi endpoints via Obihai’s free OBiTALK network or up to two (2)
available VoIP services, you have the power to bridge mobile, fixed line and Internet telephone services.
The OBi100 is a dedicated device, built with a high-performance system-on-a-chip platform to ensure high quality
voice conversations. The OBi100 has high availability and reliability because it is always-on to make or receive a call.
With the OBi100, a computer is not required and a computer does not need to be on to talk to people. To get
started, all you need is a phone, power and a connection to the Internet.
The OBi100 is Complemented by Other OBi Products & Services
OBiTALK: A customer portal for device management allowing members to add people and associated OBi endpoints
to “circles of trust” such that additional functionality can be shared amongst authorized users. The OBiTALK portal is
also where members can download the OBiAPP and OBiON applications for PCs and the iPhone, iPad, iPod touch &
Android devices, respectively.
OBiON iPhone, iPad, iPod touch & Android Devices: An application for iPhone, iPad, iPod touch and Android devices
which makes possible placing and receiving calls to/from other OBi endpoints.
OBiON PC:A middleware application for a PC that facilitates placing and receiving calls to/from other OBi endpoints.

- 2 -
Key Features of the OBi100 VoIP ATA & Voice Services Bridge:
Aggregation and Bridging of Two (2) SIP and One (1) OBiTALK Services
Automatic Attendant for Simplified Call Routing (AA)
Call Back Service –Connect to AA to Make a New Call or Ring the Attached Phone
OBiTALK Web Portal Integration
Configuration and Management of OBi Endpoints
Download OBi Client Applications for Smart Phones, Internet Devices & PCs
Creating & Joining Circles of Trust So You Can Share Your OBi
Setting Up Your OBi Endpoint Speed Dial Directory
Configurable to Work with Any SIP Compliant Internet Telephone Service
Analog Phone Impedance Agnostic
Robust Telephony Features:
Message Waiting Indication - Visual and Tone Based
Speed Dialing of 99 OBi Endpoints or Numbers
Three Way Conference Calling with Local Mixing
Hook Flash Event Signaling
Caller ID –Name & Number
Caller ID Spoofing
Call Waiting
Call Forward - Unconditional
Call Forward on Busy
Call Forward on No Answer
Call Transfer
Anonymous Call
Block Anonymous Call
Do Not Disturb
Call Return
Repeat Dialing
Powerful Call Routing & Voice Service Features:
SIP Support for Voice and Fax Over IP from Internet Telephony Service Providers
OBiTALK Managed VoIP Network for OBi Endpoint Devices & Applications
High Quality Voice Encoding Using G.711, G.726, G.729 Algorithms
Recursive Digit Maps & Associated Call Routing (Outbound, Inbound)
OBi100 & OBi110

- 3 -
General
Brand
Obihai
Browse Obihai Devices
Manufacturer
Obihai
Hardware Designer
Obihai Technology, Inc.
Model Name
OBi100
Release Date
March 2011
Microprocessor
Chip Vendor
Obihai SoC
Width of Machine Word
32 bit
Instruction Set
MIPS
FXS SLIC (Subscriber Line Integrated Circuit)
Ringer Specifications
Ring Frequency: 14Hz –68Hz
Ring Waveform: Trapezoidal, Sinusoidal
Ring Voltage: 55v –85v
Maximum Ring Load
5 REN (Ringer Equivalence Number)
FXS (PHONE Port)
Configuration Settings
Recursive Digit Map & Associated Outbound Call Routing
On-Hook Tip Ring Voltage: 30v –52v
Off-Hook Current Max: 15mA –45mA
Impedance: 12 Independent Settings
DTMF Playback Level: -90 dBm –3dBm
Caller ID Method (FSK Bell202, FSK V.23, DTMF FI/SE/DK)
Caller ID Trigger (Before / After First Ring, Polarity Reversal)
Channel Tx Gain: -12dB –12dB
Channel Rx Gain: -12dB –12dB
Silence Detect Sensitivity
Hook--Flash Time Max
HookFlash Time Min
CPC Delay Time
CPC Duration
Idle Polarity
Connect Polarity
Management –Configuration
Local Access Interface
IVR, Web Page –Password Protected (Admin & User Level Log-in)
Remote Access Interface
Syslog (Multi-Level Granularity), Invokable via SIP Notify, Web, Provisioning
Device Web Page Standard
HTTP v1.1, XML v1.0
Remote Provisioning
XML via TFTP or HTTP (TR069 / TR104 Parameter Naming Syntax)
Secure Remote Provisioning
SSL via HTTPS , Encrypted XML via HTTP or TFTP –Dedicated User Name & Password
Secure Remote Firmware Update
Encrypted Binary File via TFTP or HTTP + Dedicated User Name & Password
Customization
OBi-ZT: Obihai Zero-Touch Automatic Customization & Configuration **
Call History (CDRs)
Call Detail Records on OBi Web Page, Export to XML
LED Indications
Power, Device Status, Upgrade Progress Status, Ethernet Actvty, PHONE Status
RTP Statistics
RTP Transport Type
Audio Codec Type (Tx/Rx)
RTP Packetization - ms (Tx/Rx)
RTP Packet Count (Tx/Rx)
RTP Byte Count (Tx/Rx)
Peer Clock Differential Rate - PPM
Packets In Jitter Buffer
Packets Out-Of-Order
Packets Interpolated
Packets Late (Dropped)
Packets Lost

- 4 -
Packet Loss Rate %
Packet Drop Rate %
Jitter Buffer Length - ms
Received Interarrival Jitter - ms
DTMF Digits Received
Jitter Buffer Underruns
Jitter Buffer Overruns
Sequence Number Discontinuities
Skew Compensation - ms
Session Information
SIP Session Status
OBiTALK Status
Phone Port Status
Primary SIP Service Set-Up Wizard
Dedicated Device Web Page for Quick ITSP Account Set-Up
System Settings Back-Up / Restore
Save & Restore Configuration via XML file to / from a Local Folder
Security
Local Access Interface
IVR Password
Remote Access Interface
User Name & Password Access via HTTP, TFTP –HTTPS
Device Web Page Standard
HTTP v1.1, XMLv1.0
Secure Remote Provisioning
TFTP, HTTP, HTTPS
Network –Application Details
Data Networking
MAC Address (IEEE 802.3)
UDP (RFC 768)
TCP (RFC 793)
IP version 4 (RFC 791) –Static IP and DHCP Support
ICMP (RFC 792)
ARP - Address Resolution Protocol
RTP (RFC 1889, 1890)
RTCP (RFC 1889)
DHCP Client (RFC 2131)
DiffServ (RFC 2475) –Independently Configured: Service, SIP & Media
ToS (RFC 791, 1349) –Independently Configured: Service, SIP & Media
VLAN Tagging (802.1p) –Independently Configured: Service, SIP & Media
SNTP (RFC 2030) –Primary & Secondary NTP Servers
VoIP
SIPv2 (RFC 3261, 3262, 3263, 3264)
SIP over UDP
SIP over TCP
SIP over TCP with TLS
2 SIP Service Provider Service Sessions –Concurrent Operation
1 OBiTALK Service Session
SIP Proxy Redundancy –Local or DNS Based SVR, Primary & Secondary Fallback List
Restrict Source IP Address
Maximum Number of Sessions –Independent per Service
Trunk Groups (4)
Voice Gateway –Direct Dialing (8)
G.711 A-Law
G.711 µ-Law
G.726 (40/32/24/16)
G.729a
Codec Pre-selection Code
Voice Processing per SIP Service –TX/RX Audio Gain, Echo Cancellation
Adjustable Audio Frames per Packet
Codec Name Assignment
Codec Profile per SIP SP (2) & OBiTALK Service
Dynamic Audio Payload
Packet Loss Concealment
Jitter Buffer (Adaptive)
STUN
ICE
Management Configuration –Continued…
RTP Statistics Cont…

- 5 -
SUBSCRIBE / NOTIFY Framework (RFC 3265)
NOTIFY Dialog, Line Status
SUBSCRIBE Message Summary
VoIP NAT Interworking
DATE Header Support
ALERT-INFO Header Support
Remote-Party-ID (RPID)
P-Asserted-Identity (PAID)
RTP Statistics in BYE Message
Media Loopback Support
Telephony
Configurable Contact List (Inbound Call Routing)
Automatic Attendant (English) with Configurable Answer Delay
PIN Access Control to AA (Up to 4 PINs)
Recursive Digit Map for Call Routing (AA, Phone, Voice Gateways, Trunk Groups)
AA Configurable Outbound Call Routing Rule
SIP Service Configurable Inbound Call Routing Rule (2)
Direct / Single-Stage Dialing (Route to Voice Gateway)
Fax Pass Through (G.711)
Modem Pass Through (G.711)
In-Band DTMF (G.711)
Out of Voice Band DTMF (RFC 2833)
Out of Voice Band DTMF (INFO Method)
Call Progress Tone Generation
Tone Profile per SIP SP and OBiTALK service
Ring Profile per SIP SP and OBiTALK service
Star Code Profile per SIP SP and OBiTALK service
Full Duplex Audio
G.165, 168 Echo Cancelation
VAD –Voice Activity Detection
Silence Suppression
Comfort Noise Generation
Three Way Conference Calling with Local Mixing
Hook Flash Event Signaling
Flash Hook Timer
Caller ID –Name & Number per Bellcore, ETSI and DTMF
MWI –Message Waiting Indicator
Visual Message Waiting Indication (VMWI)
Daylight Savings Time Support –North & South Hemispheres
Caller ID Enable /Disable
Caller ID Number
Caller ID Name (Alphanumeric)
Caller ID Spoofing
Call Waiting
Maximum Session Control
Call Forward - Unconditional
Call Forward on Busy
Call Forward on No Answer (Ring Count Configurable)
Call Transfer Enable / Disable
Anonymous Call Block
Anonymous Call
Do Not Disturb
Call Return
Repeat Dialing
Call Progress Tones
Configurable Call Progress Tone
Call Progress Tone Profiles (2)
Dial Tone
Busy Tone
Ringback Tone
Reorder Tone
Confirmation Tone
Holding Tone
Second Dial Tone
Stutter Tone
Network –Application Details Continued…
VoIP Cont…

- 6 -
Howling Tone
Prompt Tone
Call Forwarded Tone
Conference Tone
SIT Tones (1-4)
Ringing & Call Waiting Tone Configuration
Ring Patterns (10) - Configurable
Call Waiting Tone Patterns (10) - Configurable
Call Waiting Tone Pattern Profiles (2)
Star Code Configuration
Configurable Start Codes
Star Code Profiles (2)
Redial
Call Return
Activate Block Caller ID
Deactivate Block Caller ID
Block Caller ID Once
Unblock Caller ID Once
Activate Call Forwarding (All Calls)
Deactivate Call Forwarding (All Calls)
Activate Call Forward on Busy
Deactivate Call Forward on Busy
Activate Call Forward on No Answer
Deactivate Call Forward on No Answer
Activate Block Anonymous Calls
Deactivate Block Anonymous Calls
Activate Call Waiting
Deactivate Call Waiting
Activate Do Not Disturb
Deactivate Do Not Disturb
Activate Repeat Dial
Deactivate Repeat Dial
Interfaces & Indicator Lights
Internet (WAN)
1 x 10/100BaseT Ethernet Port (802.3)
Phone (FXS)
1 x RJ-11 FXS Analog Phone Port
Reset Button
Yes –Located on Bottom of Case
LEDs
3 –Power + Status, Ethernet Activity, Phone
LED Indications
Power On, Device Status, Upgrade in Progress Status, Packet RX/TX, Phone Port
Status
Certifications
FCC Part 15
Yes –Class B
A-Tick
Yes
CE
Yes
ICES-003
Yes
RoHS
Yes
WEEE
Yes
UL/cUL
Yes –Power Adapter
Environmental
Operating Temperature
0º to 45º C (32º to 113º F)
Storage Temperature
-25º to 85º C (-13º to 185º F)
Operating Humidity
10% to 90% Non-condensing
Non-operating Humidity
10% to 90% Non-condensing
Call Progress Tones Cont…

- 7 -
Physical Attributes
Dimensions:
(width x depth x height)
6.5 x 9.0 x 2.2 centimetres
2.6 x 3.5 x 0.9 inches
Unit Weight:
200 grams / 7 ounces
Shipping Weight
312 grams / 12 ounces (Including Power Supply, Cable and Packaging)
Mounting
Desktop Mountable
Power Supply
Type
Universal Switching with Fixed US, EU, UK or AU Style Plug Prongs (Model
Dependent)
Input Power
AC Input: 100 to 240 Volts 0.3A 50-60Hz (26-34 VA)
Output Power
DC: +12V 1.0 Amp Max
Carton Specifications
Units Per Carton
20 Units
Carton Dimensions
(width x depth x height)
43.2 x 25.4 x 21.6 centimetres
17 x 10 x 8.5 inches
Carton Weight
6.4 Kilograms / 14 pounds
Cartons Per Std. 20 / 40 ft Container
1,170 / 2,430 Cartons –Non-palletized
Miscellaneous
Requirements
Active Internet Connection
Analog Touch Tone Phone
Access to Internet Via a Switched Ethernet Port on Home or Office Router
(Optional) Active Internet Phone Service Subscription with All Required SIP
Credentials to Make & Receive Calls
Documentation
Quick Start / Installation Guide
User / Administrative Guide
Implementation Guide for Service Providers **
Package Contents
OBi100 Voice Service Bridge and Telephone Adapter
Power Adapter
1 x RJ-45 Ethernet Cable (80 inches / 203 centimeters)
Quick Start / Installation Guide
Warranty
1-Year Hardware (Limited)
Engineering & Design Location
California, USA
HST Code
8517.62.00
Data Sheet State
All content subject to change.
This data sheet is not a warranty.
Data Sheet Version
131217.100.2
** For Service Providers Only
∞Available in Future with Firmware Update
iPhone, iPad and iPod touch are trademarkes of Apple Computer, Inc.
Android is a trademark of Google, Inc.
OBi, OBiAPP, OBiON and OBiTALK are trademarks of Obihai Technology, Inc.
All other trademarks metioned in this document are property of their respective owners.
This document is provided by Obihai Technology for planning purposes only. No warranty is implied.
Do Not Use For Emergency Service Calls
Obihai Technology does not warrant the availability or quality of the OBiTALK network. Furthermore, Obihai
Technology will not be liable to you or any third party for any costs or damages arising directly and or indirectly
from the use of thisproduct’s hardware & software including without limits any damage, or for any loss whatsoever.
©2010-2013 Obihai Technology, Inc. All rights reserved.