Ocean Digital IRT-01C User manual

User Manual
Please read this user manual carefully before using the receiver.
IRT-01C
Internet Radio Adaptor

Location of Controls
LCD Display
Infrared Sensor
3.5 mm Audio out socket:
Connect external powered speakers with
3.5 mm plug or RCA adapter
Earphone jack
DC Power socket 5V:
Connect the AC adaptor supplied in the package
Power on/off switch
Remote control
1. : Standby button
2. : Mute
3. 0-9: Favorite station key / input letters and numbers for
WiFi Encryption code
4. : Dim the display
5. : Favorite button, Long press to preset station. Press it
briefly to recall station. Adding station to your favorite list
6. aGCursor up
7. aGCursor down
8. : Cursor left / back to previous menu
9. : Cursor right
10. OK: confirm button
11. : Alarm button
12. : Sleep Timer
13. Vol+: Volume up
14. Vol-: Volume down
15. : Main Menu
16. Mode: Switch between Internet radio,
Media Center (UPnP) and Bluetooth
17. EQ: Equalizer
18. : Previous song (for UPnP)/Previous radio channel
19. : Play/pause (for UPnP)
20. : Next song (for UPnP)/Next radio channel

OFF/ON
Audio out DC 5V

Before you start
Please ensure the following is ready:
• You have a broadband internet connection.
• A wireless (Wi-Fi) broadband router is connected to the internet successfully.
The radio supports Wireless B, G and N connection (Wireless N router can also be used with
the setting on B or G).
• You know the Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data
encryption code/password. You need to key in the correct code when the radio is connected
to the wireless router for network connection.
If you do not know the code/password, please contact the person /technician who set up the
router/network for you.
• The radio can work via Wireless network connection (Wi-Fi connection).
Precautions
• The radio should not be used in a high temperature or high humidity environment over
prolonged periods of time as this may damage the unit.
• Keep the radio away from liquids as it may get damaged. Please switch off the radio
immediately if water or liquids is spilled into the radio. Consult with the shop you bought this
radio for any question.
• Avoid using or storing the unit in dusty or sandy environment.
• Do not open and repair the radio by yourself.
• Use only the AC adaptor supplied with the radio.
Connecting a power supply with a different rating will cause permanent damage to the radio
and may be hazardous.
• Clean only with dry cloth
The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.


Remote control character list
Key“0”―― 0,'DEL'
Key“1”―― '1'->'@'->' '˄space˅->'ʽ'-> “ (double quotes)->'#'->'$'->'%'->'&'-> '˄single
quotes˅->'˄'->'˅'->'*'->'+'->'ˈ'->'-'->'.'->'/'->':'->';'->'<'->'='->'>'->'?'->'['->'\'-
>']'->'^'->'_'->'`'->'{'->'|'->'}'->'~'
Key “2”―― 2,A,B,C,a,b,c
Key“3”―― 3,D,E,F,d,e,f
Key“4”―― 4,G,H,I,g,h,i
Key“5”―― 5,J,K,L,j,k,l
Key“6”―― 6,M,N,O,m,n,o
Key“7”―― 7,P,Q,R,S,p,q,r,s
Key“8”―― 8,T,U,V,t,u,v
Key“9”―― 9,W,X,Y,Z,w,x,y,z
Remark: press '►' to move to next character and press 'OK' button to confirm.
You can also press ▲ ▼ to change the character /number, then press the right key► to confirm
the entry.
After you finish the entry, press the select button to confirm
Switching on the radio
Plug the connector pin of the mains adaptor into the DC jack on the unit. Connect the other end
of the adaptor to the wall socket.
Caution: Use only the main adaptor supplied with the radio. Connecting a power supply with a
different rating will cause permanent damage to the radio and may be hazardous.
The display on the front of the radio will light up and show:
Then you can select your prefer language on the radio.
It will ask you if you want to Enable the “Check Network” when Power on”, it is suggested to
choose “Yes”. Then the radio will always check the available WiFi network automatically.
Welcome
• English
Deutsch
Français
< 2/7 
01:44AM



Connecting to your WiFi Network
The following screen will appear. You can choose <Yes> to proceed to search for the available
WiFi network. If your router has the WPS function, you can select the <Yes (WPS)> to proceed.
It will then start scanning the network. After the search is done, it will display a list of the
available router.
Choose your router from the list, enter the WEP(Wired Equivalent Privacy) or WPA(Wi-Fi
Protected Access) code. If your network is not configured to be with the WEP or a WPA code,
the unit will connect to the router automatically.
Note: The encryption code would have been set up by the person who set up and
configured your network.
Please refer to the “Remote control character list” for you to enter the passwords. Press the
“ ► ” button to go to the next entry, press “ ◄” button to make correction.
The radio will start connecting to the network.
After the router is connected successfully, it will display the menu screen:
You can now start enjoying the internet radio.
01:01
Would you like to
configure Network now?
Yes(WPS) NOYes
Linksys
Homeaudio
Demo
0144
MOVE INPUTOK
Ent er

Password
11
1623
0858
Internet Radio


Internet Radio
Choose 'Internet Radio' from the menu, you can see different functions as below:
To start listen the worldwide radio stations, select “Radio Station/Music”,
My Favorite
This is to show the list of your Favorite stations which have been assigned to the presets.
To preset a station:
While you are playing the favorite station, simply hold and press the key until the follow
screen appear.
The icon will appear, it means the station is added to the radio preset.
Kindly note the Preset 1-5 are reserved for new feature in future. The preset will be saved from
Preset #6 onwards.
The presets will be stored in ascending order. You can store up to 250 presets.
Edit the presets
You can edit your Favorite list with the following options:
Delete – To delete the selected station
Shift up/Shift down – To shift the selected station to a particular ranking on the list.
Rename – To rename the selected station
Play – press and play the selected station
To do the edit, simply press the button briefly to enter the Preset station list.
Choose the radio station that you want to make with the above changes. Then press the Right
key ►, it will enter into the edit menu. Then choose your desire action.
To recall a preset station:
Press the button briefly to recall the favourite list.
Remark: Please note Preset 1-5 is reserved for future use and cannot be preset for radio
stations.
Radio Station / Music
Select this option, then you can select your desired radio station by Genre or Location., etc.
1 .977 The 80s Channel
.977 The 90s Chanr
MOVE2/2 OK
Add to My Favorite
Delete
Shift Up
Shift Down
< 1/5 >
iRadio

Local Radio
If you want to access quickly the radio station located in your area, select this function and it
will display the list of the stations available in your area.
Remark: You can set other region as the local radio in the Local radio set up under
Configuration.
History
It will show you the radio stations that you have listened in the past.
Service
Search Stations
You can find your desire radio station by entering the name of the radio.
Add New Radio Station
If you cannot find your desire station from the Radio station list and you have the URL address,
you can input the link here and add to your favorite list.
When the radio station is playing, the display will show a color image transmitted from the
radio station.
DLNA
The Internet radio can play music stream from DLNA compatible device, provided that the
Internet radio and other DLNA devices are under the same Wi-Fi network.
The radio will appear as “AirMusic” when you try to search it on other devices. If you want to
change other name from AirMusic, go to Configuration and DLNA setup to make the change.
Media Center
UPnP (Universal Plug and Play)
You can stream music from the Networked device which supports UPnP function to the radio to
play.
For instance, most of the latest computer laptop supports UPnP, and you can stream music
from Windows Media Player application on the computer and listen on your radio.
Please make sure your computer laptop is on the same Wi-Fi network as the Radio
before you start using this function.
1. If your PC is running Microsoft Windows XP, then you can use Windows Media Player 11
(WMP11) to act as your UPnP (Universal Plug and Play) media server. (For Windows 7 or
above, please download the correspond version of Windows Media Player). The latest
Windows Media Player may be downloaded from Microsoft's website and install by
following the instructions detailed in its installation wizard.
2. Once installed, Windows Media Player will create a library from all the media files available
to it on your PC.
iRadio
Internet Radio
Music
977
.977 The 80s Channel


2.1 Windows XP / Windows Media 11
2.1.1 To add new media files to the library, select' File > Add to Library…> Advanced
Options', Click 'Add' and choose the files you wish to add and click' OK'.
2.1.2 Now you need to connect your Internet radio to Windows Media Player 11 and
configure it to allow the radio to access your media library. In order to this, you will
need to do the following:
a.On the radio, go to the main menu and select <Media Centre> <UPnP>.
b. It will scan for all available UPnP servers. Note, this may take a few seconds for
the radio to complete its scan and before the scan has completed, the radio will
display '[Empty]'. The radio will continue to display '[Empty]' if no UPnP servers
and found.
c.After a successful scan. Select your UPnP server, by rotating the dial if there is
more than one UPnP server, and then press SELECT.
2.1.3 Your PC will now prompt you that a device has attempted to connect to your UPnP
server. In order to allow the radio to have access to the media files, you will need to
click the 'Library' tab from Windows Media Player 11 and select the <Media
Sharing> item to open the 'Media Sharing' window.
Selecting 'Media Sharing…' for Windows Media Player11:
2.1.4 From the 'Media Sharing' windows, the radio will be listed as an unknown device.
Click on the unknown device listed, then click the 'Allow' button and then click 'OK'.
Allowing the Radio to Connect:



2.2 Windows 7 / Windows Media Player 12
2.2.1 If you are using WMP 12, simply go to <File> and choose <Open> to retrieve the
music files you would like to add to library.
2.2.2 Windows 7 or above requires the PC to be set as Home network and also with the
Homegroup enabled to allow devices to access/ play the media files on your
Windows Media Player. Please find the steps below:
i)Go to <Control Panel>, select <Network and Internet>
ii) Choose <HomeGroup>
iii) Set the network location


iv) Choose Home network
v) Create a homegroup, then choose the kind of media file to be accessed,
such as music..etc.
vi) Launch the Windows Media Player, select <Stream> and choose <Automatically allow
devices to play my media> from the drop down list.
vii) You can now enjoy the music streaming from the windows media player.