Ocean Matrix OMX-12GSDI-1X6 User manual

Ocean Matrix
812 Kings Highway
Saugerties NY 12477
www.oceanmatrix.com
SAFETY PRECAUTIONS
1. To prevent fire or shock hazard, do not expose this equipment to high
humidity and/or dust. Do not use in an unprotected outdoor installation
nor any area classified as overly damp or wet.
2. The temperature for installation should be kept between 32°F to 140°F
(0°C to 60°C). Avoid direct sunlight exposure or extreme changes of tem-
perature over a short period of time.
3. Do not disassemble the unit or place it on an unstable base.
4. Do not drop the unit and avoid heavy impact.
5. This unit should not be permanently installed unless proper ventilation is
provided. Any enclosure openings must not be blocked or covered as
they protect the unit from overheating.
6. Before cleaning, turn off the power and unplug the unit from all connec-
tions. Use a damp cloth. Do not use liquid cleaners nor aerosol cleaners.
7. Do not overload outlets and extension cords as this may
result in a risk of fire or electric shock.
8. Enclosure entry is dangerous. Never push objects of any kind, including
liquids, into this unit through openings as they may touch dangerous volt-
age points or short-out parts that could result in a fire or electric shock.
9. Do not attempt to open or service this unit yourself as
opening or removing covers may expose you to dangerous voltage and
other hazards.
10. There are no user-serviceable parts inside the unit. If the unit requires
service contact your authorized dealer, or an
authorized repair service company.
USER MANUAL
OMX-12GSDI-1X6
Ocean Matrix OMX-12GSDI-1X6 Reclocking Distribution Amplifier
with 12G/6G/3G Compatibility
Ocean Matrix
812 Kings Highway ·Saugerties, NY 12477
www.oceanmatrix.com

OMX-12GSDI-1X6
Reclocking Distribution Amplifier 
The Ocean Matrix OMX-12GSDI-1X6 Reclocking Distribution Amplifier
replicates SDI video signals across 6 outputs for real-time multi viewing
or recording.
This distribution amplifier reclocks and splits one SDI, HD-SDI, 3G-SDI,
6G-SDI, or 12G-SDI input to six SDI compliant outputs using automatic
signal detection. OMX-12GSDI-1X6 supports SMPTE video formats for
HD and UHDTV broadcast requirements, in addition to 2K and 4K SDI
transmission.
Includes: 5V/2A Power Supply
Specifications
SDI Standards SMPTE UHDTV-SDI
Supported Formats DVB-ASI at 270Mbps, SMPTE 259M,
SMPTE 292M, SMPTE 344M, SMPTE
424M, SMPTE425M, SMPTE ST2081,
SMPTE ST2082
Video Bandwidth 11.868 / 11.88Gbps
Data Rates 1.485 / 2.97 / 5.96 / 11.88 Gbps
Cable Equalization up to 1000ft@SD, 500ft@HD, 300ft@3G,
and 150ft@12G
PCB Stack-Up 6-Layer Board/Impedance Control
Differential 100Ω, single 75Ω
Input/Outputs SDI (BNC 75Ω)
Power Consumption 5W
Operating Temperature 32°F to 104°F (0°C to 40°C)
Dimensions (LxWxH) 8x2.75x1in / 203x6.99x25.4mm with flanges
Weight 1 lb / 0.45 kg
Ocean Matrix OMX-12GSDI-1X6 Page 2
1 3
2
Ocean Matrix OMX-12GSDI-1X6 Page 3
LED Indicators
Lock
Rate
Power
1 12G/6G/3G/HD/SD-SDI Output
2 12G/6G/3G/HD/SD-SDI Input
3 5VDC Power Input
Front Panel
Rear Panel
OMX-12GSDI-1X6 Features
Installation
A Connect 12G/6G/3G/HD/SD-SDI source to input #2 above
B Connect 12G/6G/3G/HD/SD-SDI display or devices to outputs #1 above
C Plug power adapter into the power input #3 above