Ocean Matrix OMX-ADA6 User manual

OMX-ADA6
1x6 Balanced Stereo Audio
Distribution Amplifier
www.oceanmatrix.com
Thank you for purchasing this Ocean Matrix component. This unit is designed
to give you years of trouble free professional operation for your most
demanding applications. It is our goal to develop long term partnerships with
our customers through our commitment to exceed their expectations.
Instruction Manual
For Repair Information or to view the entire Ocean Matrix product line, please visit our web site.

1x6 Balanced Stereo Audio
Distribution Amplifier
OMX-ADA6
812 Kings Highway • Saugerties, NY 12477
A Division of Tower Products, Inc.
The OMX-ADA6 is shipped from the factory already calibrated and ready to use. There is no need
for any customer adjustments for normal use of the unit. There are, however, procedures that must
be observed in order to assure proper performance of the unit in your system.
The OMX-ADA6 is a high quality, compact 1 X 6 Balanced audio distribution amplifier. With a band-
width of 30 Khz, this product is perfectly suited for those applications where an audio signal needs to
be distributed and fed along balanced lines. Several OMX-ADA6 units can be used to provide “bank
feed” signal distribution points in a production facility. The OMX-ADA6 can be used for unbalanced sig-
nals as well by simply inserting a tip/ring 1/4” phone plug into the rear panel connector.
GENERAL OPERATION
AUDIO (per channel)
Input: Balanced, Hi-Z, Bridging (150K)
OdB Nominal on 1/4" TRS Connectors
Outputs: 6 Outputs: 600Ω, Balanced 1/4" TRS
0dB Nominal (Unity)
Gain: -3dB to +3dB, internally
Freq. Resp.: 10Hz - 20KHz, @ 0; -1.2dB
S/N Ratio: 85dB: 20Hz - 20KHz
Harmonic Distribution: Less than 0.05%
Power Requirements: 110VAC 50/60Hz, 10 Watts (220V Model OMX-EU/ADA6)
Dimensions: 1.625”H x 8.25”W x 6”D, Steel Housing
Weight: 2.5lbs. (Less Shpg. Carton)
SPECIFICATIONS
OMX-ADA6 1x6 Balanced Stereo Audio Distribution Amplifier
The OMX-ADA6 can be used with unbalanced devices.
Simply insert a 1/4" PhoneTip-Sleeve into the input/out-
put connectors and feed to your unbalanced device.
1/4" Tip-Sleeve (Unbalanced) TS
1/4" Tip-Ring-Sleeve (Balanced) TRS
USING UNBALANCED DEVICES

1x6 Balanced Stereo Audio
Distribution Amplifier
OMX-ADA6
812 Kings Highway • Saugerties, NY 12477
A Division of Tower Products, Inc.
1. To prevent fire or shock hazard, do not expose this equipment to the environment of Humidity
and/or dust. Do not use this equipment in an unprotected outdoor installation or any area classi-
fied as a wet area.
2. The operating temperature of this product must be kept between -40°C and +95°C. Direct sun-
light or an intense source of heat, direct or ambient, must not be introduced to the product
either by induction or contact.
3. Always keep the product on a stable and secure base or enclosure. Do not drop the product or
subject it to sudden heavy impact.
4. Provide adequate ventilation so that thermal characteristics do not cause an increase in product
temperature to resulting in overheating.
5. Do not clean the unit by using electrically conductive or corrosive chemicals. Always be certain
to unplug the unit from AC wall power before any major cleaning. Use a damp cloth only for
cleaning.
6. Do not subject the product to electrical mains power over voltage: The product must be used at
the rated supply voltages indicated on the product rear panel only.
7. Do not plug the product into an overloaded electrical outlet. This may result in fire or electrical
shock.
8. Object Ingress and Liquid Entry: Never insert or push sharp metal objects into the product or use
such devices for an attempt at opening or servicing the product. Servicing should be referred to
a trained and qualified technician only. Do not allow liquid of any type to enter the unit. Do not
allow the unit to be submersed in water as this may cause a shock hazard.
9. A trained qualified technician should perform all servicing of the unit. There are no serviceable
components within the unit for user access.
Safety Precautions