Oceanic OCEACTG4IX User manual

OPERATING AND INSTALLATION
INSTRUCTIONS OF 60cm FRONT
CONTROL BUILT-IN GAS HOB
OCEACTG4IX
EN

Dear Customer,
Our goal is to offer you products with high quality that exceed your expectations.
Your appliance is produced in modern facilities carefully and particularly tested for
quality.
This manual is prepared in order to help you use your appliance that is manufactured
by the most recent technology, with confidence and maximum efficiency.
Before using your appliance, carefully read this guide that includes the basic
information for right and safe installation, maintenance and use. Please contact to
the nearest Authorized Service for the installation of your product.
CE Declaration of conformity
This appliance has been designed to be used only for home cooking. Any other use
(such as heating a room) is improper and dangerous.
This appliance has been designed, constructed, and marketed incompliance with:
• Safety requirements of the "Gas" Directive 2009/142/EC;
• Safety requirements of the "Low voltage" Directive 2006/95/EC;
• Safety requirements of the "EMC" Directive 2004/108/EC;
• Requirements of the Directive 93/68/EC.

2
CONTENTS:
1. BRIEF PRESENTATION OF PRODUCT
2. WARNINGS
3. INSTALLATION AND PREPARATIONS FOR USE
3.1
3.2 Gas connection
3.3 Electric connection and safety
3.4 Gas conversion
4. USE OF YOUR PRODUCT
4.1 Use of gas burners
4.2 Use of hotplate
4.3 Accesorries
5. CLEANING AND MAINTENANCE
5.1 Cleaning
5.2 Maintenance
6. SERVICE AND TRANSPORT
6.1
6.2 Information related to the transport
Installation of product
Basic troubleshooting before contacting service

3
1. BRIEF PRESENTATION OF PRODUCT
* The appearance of your hob may be different than the model shown above due to its configuration.
Control Knobs
Auxillary Burner Medium Burner
Pan Support
Cooktop
Medium Burner
Rapid Burner

4
2. WARNINGS
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE USING YOUR APPLIANCE, AND
KEEP IT IN A CONVENIENT PLACE FOR REFERENCE WHEN NECESSARY.
THIS MANUAL IS PREPARED FOR MORE THAN ONE MODEL IN COMMON. YOUR APPLIANCE MAY
NOT HAVE SOME OF THE FEATURES THAT ARE EXPLAINED IN THIS MANUAL. PAY ATTENTION TO THE
EXPRESSIONS THAT HAVE FIGURES, WHILE YOU ARE READING THE OPERATING MANUAL.
General Safety Warnings:
Your appliance is produced in accordance with all applicable local and international standards and
regulations.
Maintenance and repair work must be made only by authorized service technicians. Installation
and repair work that is carried out by unauthorized technicians may endanger you. It is dangerous
to alter or modify the specifications of the appliance in any way.
•
•
•Prior to installation, ensure that the local distribution conditions (nature of the gas and gas
pressure or electricity voltage and frequency) and the adjustments of the appliance are compatible.
The adjustment conditions for this appliance are stated on the label.
•CAUTION: This appliance is designed only for cooking food and is intended for indoor domestic
household use only and should not be used for any other purpose or in any other application, such
as for non-domestic use or in a commercial environment or room heating.
•This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be
made by children without supervision.
•This appliance is not connected to a combustion products evacuation device. It shall be installed
and connected in accordance with current installation regulations. Particular attention shall be
given to the relevant requirements regarding ventilation.
•If after 15 s the burner has not lit, stop operating the device and open the compartment door
and/or wait at least 1 min before attempting a further ignition of the burner.
•These instructions are only valid if the country symbol appears on the appliance. If the symbol
does not appear on the appliance, it is necessary to refer to the technical instructions which will
provide the necessary instructions concerning modification of the appliance to the conditions of
use of the country.
•WARNING: The appliance and its accessible parts become
hot during use. Care should be taken to avoid touching

5
2. WARNINGS
heating elements. Children less than 8 years of age shall be
kept away unless continuously supervised.
•WARNING: Unattended cooking on a hob with fat or oil can
be dangerous and may result in fire. NEVER try to
extinguish a fire with water, but switch off the appliance
and then cover flame e.g. with a lid or a fire blanket.
•WARNING: Danger of fire: do not store items on the
cooking surfaces.
•WARNING: If the surface is cracked, switch off the
appliance to avoid the possibility of electric shock.
•For hobs incorporating a lid, any spillage should be
removed from the lid before opening. And also the hob
surface should be allowed to cool before closing the lid.
•The appliance is not intended to be operated by means of
an external timer or separate remote-control system.
•Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass and other surface
since they can scratch the surface, which may result in
shattering of the glass or damage to the surface.
•Do not use steam cleaners for cleaning the appliance.
•All possible security measures have been taken to ensure your safety. Since the glass may break,
you should be careful while cleaning to avoid scratching. Avoid hitting or knocking on the glass with
accessories.
•Ensure that the supply cord is not wedged during the installation. If the supply cord is damaged, it
must be replaced by the manufacturer, its service agent or similarly qualified persons in order to
prevent a hazard.
Installation Warnings:
•Do not operate the appliance before it is fully installed.
•The appliance must be installed by an authorized technician and put into use. The producer is not
responsible for any damage that might be caused by defective placement and installation by
unauthorized people.
•

6
•
•Protect your appliance against atmospheric effects. Do not expose it to effects such as sun, rain,
snow etc.
•The surrounding materials of the appliance (cabinet) must be able to withstand a temperature of
min 100°C.
During usage:
•Do not put flammable or combustible materials, in or near the appliance when it is operating.
•Do not leave the cooker while cooking with solid or liquid oils. They may catch fire on condition of
extreme heating. Never pour water on to flames that are caused by oil. Cover the saucepan or
frypan with its cover in order to choke the flame that has occured in this case and turn the cooker
off.
•Always position pans over the centre of the cooking zone, and turn the handles to a safe position
so they cannot be knocked or grabbed.
•If you will not use the appliance for a long time, plug it off. Keep the main control switch off. Also
when you do not use the appliance, keep the gas valve off.
•Make sure the appliance control knobs are always in the "0" (stop) position when it is not used.
•CAUTION: The use of a gas cooking appliance results in the production of heat, moisture and
products of combustion in the room in which it is installed. Ensure that the kitchen is well
ventilated especially when the appliance is in use, keep natural ventilation holes open or install a
mechanical ventilation device (mechanical extractor hood).
•Prolonged intensive use of the appliance may call for additional ventilation, for example opening
of a window, or more effective ventilation, for example increasing the level of mechanical
ventilation where present.
During cleaning and maintenance:
•Always turn the appliance off before operations such as cleaning or maintenance. You can do it
after plugging the appliance off or turning the main switches off.
•Do not remove the control knobs to clean the control panel.
TO MAINTAIN THE EFFICIENCY AND SAFETY OF YOUR APPLIANCE, WE RECOMMEND YOU ALWAYS
TO USE THE ORIGINAL SPARE PARTS AND TO CALL ONLY OUR AUTHORIZED SERVICES IN CASE OF
NEED.
When you unpack the appliance, make sure that it is not damaged during transportation. In case
of any defect; do not use the appliance and contact to the authorized maintenance service
immediately. As the materials used for packaging (nylon, staplers, styrofoam...etc) may cause
harmful effects to children, they should be collected and removed immediately.
2. WARNINGS

7
3. INSTALLATION AND PREPARATIONS FOR USE
Important: This appliance must be installed by a qualified people according to the
manufacturers installation instructions, local building regulations, gas authority codes and
electrical wiring instructions.
3.1. Installation of your product
Advice for the installer
Important
• The appliance should be installed, regulated and adapted to function with other types of gas by
a QUALIFIED INSTALLATION TECHNICIAN. Failure to comply with this condition will render the
guarantee invalid.
• The appliance must be installed in compliance with regulations in force.
• Installation technicians must comply to current laws in force concerning ventilation and the
evacuation of exhaust gases.
• Always disconnect the gas supply from the appliance before carrying out any maintenance
operations or repairs.
• The appliance must be housed in heat-resistant units.
• These tops are designed to be embedded into kitchen fixtures measuring 600 mm in depth.
• Do not install the appliance near inflammable materials (eg. curtains).
Location
• The appliance may be installed in a kitchen, kitchen/diner or a bed sitting room, but not in a
room or space containing a bath or a shower.
3
• The appliance must not be installed in a bed-sitting room of less than 20 m .
• The appliance is designed and approved for domestic use only and should not be installed in a
commercial, semi commercial or communal environment. Your product will not be guaranteed if
installed in any of the above environments and could affect any third party or public liability
insurances you may have.
Ventilation requirements
3 2
• For rooms with a volume of less than 5 m - permanent ventilation of 100 mm free area is
required.
!
!

8
3. INSTALLATION AND PREPARATIONS FOR USE
3 3 2
• For rooms with a volume of between 5 m and 10 m a permanent ventilation of 50 cm free
area will be required unless the room has a door which opens directly the outside air in which
case no permanent ventilation is required.
3
• For rooms with a volume greater than 10 m - no permanent ventilation is required.
Pay attention: Regardless of room size, all rooms containing the appliance must have direct
access to the outside air via an openable window or equivalent.
Technical information for the installer
• I
In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown in
Fig. 4 has to be made, bearing in mind the following:
t is absolutely essential that you place a separator between the base of the hob and the
drawer unit.
!

9
3. INSTALLATION AND PREPARATIONS FOR USE
FASTENING THE INSTALLATION
BRACKETS
•Each cooker top is provided with an
installation kit including brackets and
screws for fastening the top to fixture
panels.
•Turn the cooker top upside down and
fasten the brackets which can be
connected to cooker in two different
position depending on fixture panel
thickness as shown in figure 3.5 or
3.6 to the appropriate
holes, without tightening the screws
“B” for the moment.
“A”
screw
FASTENING THE COOKER TOP
•
•Insert the cooker top into the hole and
position it correctly. (Fig 3.2)
•Adjust the position of the brackets “A”
and tighten screws “B” to thefix
cooker top firmly in position (Fig 3.5,3.6)
INSTALLATION IN KITCHEN
CABINET WITH DOOR (Fig.3.7)
The distance between the bottom of the
hob and the fixture surface should be at
least 60mm.
Fig.3 .6
B
A
Tt 25 mm<
Tt
B
A
Fig.3. 5
Tt
Tt>25 mm
Fig.3 .7
60 mm
Fig.3 .4
C
Apply the one_sided self_adhesive
sealing tape ‘C’all the way round the
lower edge of the cooktop. Do not
stretch it. ( Fig 3.4)

10
3. INSTALLATION AND PREPARATIONS FOR USE
Locating of your hob
Neighbourhood walls A[mm] B[mm]
Combustible 60 150
Non-combustible 40 50
510 mm
Min. A
490 mm
Min. B
Min.
100mm
Min.
25mm
580 mm
560 mm
42 mm
Fig. 3

3. INSTALLATION AND PREPARATIONS FOR USE
11
Emptying of the Burned Gases from Environment
The cooking appliances that operate with gas, throw the burned gas wastes out directly to the
outside or through the cooker hoods that are connected to the a chimney that opens directly to the
outside. If it seems that it is not possible to install a cooker hood, it is required to set an electric fan
on the window or wall that has access to fresh air. This electric fan must have the capacity to change
the air of the kitchen environment 4-5 times of its own volume of air per hour.
3.2. Gas connection
The connection of the appliance should be performed in accordance with local and international
standards and regulations applicable. You can find the information related to appropriate gas types
and appropriate gas injectors on technical data table. If the pressure of used gas is different than
these values stated or not stable in your area, it may be required to assemble an available pressure
regulator on the gas inlet. It is certainly required to contact to the authorized service to make these
adjusments.
The points that must be checked during flexible hose assembly
If the gas connection is made by a flexible hose that is fixed on the gas inlet of appliance, it must be
fixed by a pipe collar as well. Connect your appliance with a short and durable hose that is as close
as possible to the gas source. The hose's permitted maximum lenght is 1.5m. The hose that brings
gas to the appliance must be changed once a year for your safety.
0
The hose must be kept clear from areas that may heat up to temperatures in excess of 90 C. The
hose must not be ruptured, bent or folded. It must be kept clear of sharp corners, moving things,
and should not be defective. Before assembly, it must be checked whether there is any production
defect.
As gas is turned on, all connection parts and hose must be checked with soapy water or leakage
fluids. Do not use naked flame to check gas leakage. All metal components used during gas
connection must be clear of rust. Also check the expiry dates of components to be used.
The points that must be checked during fixed gas connection assembly
To assemble a fixed gas connection (gas connection made by threads, e.g. a nut), there are different
methods used in different countries. The most common parts are already supplied with your appliance.
Any other part can be supplied as spare part.

3. INSTALLATION AND PREPARATIONS FOR USE
12
3.3. Electric connection and safety
.
• .
During the electric connection, follow the instructions stated in the user manual
The earthing cable must be connected to the earth terminal
During connections always keep the nut on the gas manifold fixed, while rotating the counter-part.
Use spanners of appropriate size for safe connection. For all surfaces between different
components, always use the seals provided in the gas conversion kit. The seals used during
connection should also be approved to be used in gas connections. Do not use plumbing seals for
gas connections.
Remember that this appliance is ready to be connected to gas supply in the country for which it has
been produced. The main country of destination is marked on the rear cover of the appliance. If you
need to use it in another country, any of the connections in the figure below can be required.
In such a case, contact local authorities to learn the correct gas connection.
It is required to call the authorized service to be able to make the gas connections appropriately
and in compliance with safety standards.
ATTENTION! Surely do not use any match or lighter for control of gas leakage.
!
Seal
Hose
Fitting
Hose
Fitting
Gas Hose
with Collar
Gas Pipe
Figure 4
Seal
Hose
Fitting
Gas Hose
with Collar
Gas Pipe
Mechanical
Gas Hose
Seal
Hose
Fitting
Gas Pipe
Seal
Hose
Fitting
Hose
Fitting
Mechanical
Gas Hose
Gas Pipe
Mechanical
Gas Hose
Hose
Fitting
Gas Pipe

3. INSTALLATION AND PREPARATIONS FOR USE
13
•
.
The appliance is adjusted for 230V 50Hz electricity. If the mains electricity is different contact
your authorized service
•
•
.
3.4 Gas conversion
:
Changing injectors:
• .
•
•
•
The supply cord should be kept away from hot parts of appliance. Otherwise, the cord may be
damaged, causing short circuit.
The manufacturer declares that it has no responsibility against any kind of damages and losses
that are caused by improper connections that are performed by unauthorized people
Caution: The following procedures must be undertaken by authorized service people.
Your appliance is adjusted to be operated with LPG/NG gas. The gas burners can be adapted to
different types of gas, by replacing the corresponding injectors and adjusting minimum flame length
suitable to the gas in use. For this purpose, following steps should be performed
Cut off the main gas supply and unplug from the electric mains
Remove the burner cap and the adapter(Figure 6).
Unscrew the injectors. For this, use a 7mm spanner(Figure 7).
Replace the injector with the ones from the gas conversion kit, with corresponding diameters
suitable to the type of gas that is going to be used, according to the information chart (which is
also supplied in the gas conversion kit).
Figure 5
•
.
• .
•
• .
•
.
You have to ensure the power cord with suitable insulation to be connected to the power source
during the connection If there is no appropriate earthed electric outlet in accordance with
regulations in the place where the appliance to be installed, contact to our authorized service.
The earthed electric outlet must be close to the appliance.
Do not use an extension cord
The power cord must not touch to the hot surface of the product.
In case the cord is damaged, contact Authorized Service to have it changed
Any wrong electric connection may damage your appliance, as well as endangering your safety,
rendering your guarantee invalid
BROWN
BLUE
YELLOW GREEN

3. INSTALLATION AND PREPARATIONS FOR USE
14
Adjusting the reduced flame position
The flame length in the minimum position is adjusted with a flat screw located on the valve. For
valves with flame failure device, the screw is located on the side of the valve spindle(Figure 8-9). For
valves without flame failure device, the screw is located inside the valve spindle(Figure 10). For
easier reduced flame adjustment, it is advised to remove the control panel (and microswitch, if
present) during adjustment.
To determine the minimum position, ignite the burners and leave them on in minimum position.
Remove the with the help of a small screwdriver fasten or loosen the bypass screw around 90
angular degrees. When the flame has a length of at least 4mm, the gas is well distributed. Make
sure that the flame does not die out when passing from the maximum position to the minimum
position. Create an artificial wind with your hand toward the flame to see if the flames are stable.
:
Figure 7
Injector
Spanner
Figure 9 Figure 10
Figure 6
Figure 8
Valve with flame failure device Valve with flame failure device Valve without flame failure device
Changing the gas inlet:
For some countries, the gas inlet type can be different for NG/LPG gases. In such a case, remove the
current connection components and nuts (if any) and connect the new gas supply accordingly. In all
conditions, all components used in gas connections should be approved by local and/or
international authorities. In all gas connections, refer to the “Assembly of gas supply and leakage
check” clause explained before.
Bypass screw
Bypass screw
Bypass screw
(Inside the hole)

4. USE OF YOUR PRODUCT
15
4.1 Use of gas burners
•
:
•
.
Flame safety device:
.
Ignition of the burners
To determine which knob controls which burner, check the position symbol above the knob.
Manual Ignition
If your appliance is not equipped with any ignition aid or in case there is a failure in the electric
network, follow the procedures listed below
To ignite one of the burners, press and turn its knob counter-clockwise so that the knob is in
maximum position, approach a match, taper or another manual aid to its upper circumference.
Move the ignition source away as soon as you see a stable flame.
Electrical Ignition
Electrical ignition of gas burners can be performed in two ways; depending on the configuration of
your appliance
Ignition by Hob Control Knob: Press the hob control knob of the burner you want to operate and
turn the hob control knob in the counterclockwise direction so that the knob is in maximum
position while keeping the knob pressed. The spark plugs will generate sparks as long as you keep
the control knob pressed. The micro switch placed under the knob will automatically create sparks
through the spark plug of the burner. Continue pressing the knob until you see a stable flame on
the burner.
Hob Burners (If your product is equipped with gas safety device)
Hobs equipped with flame failure device provide security in case of accidentally extinguished flame.
If such a case occurs, the device will block the burners gas lines and will avoid any accumulation of
unburned gas. Wait 90 seconds before re-igniting an extinguished gas burner
Ignition by Spark Button: Press the valve of the burner you want to
operate and turn the valve in the counter-clockwise direction so that the
knob is in maximum position and with your other hand, press the ignition
button (Figure 11) at the same time. Press the ignition button
immediately, because if you wait, a build up of gas may cause the flame to
spread. Continue pressing the ignition button until you see a stable flame
on the burner.
Figure 11

4. USE OF YOUR PRODUCT
16
Controlof the hob burners
The knob has 3 positions: Off (0), maximum (big flame symbol) and minimum (small flame symbol).
After you ignite the burner in maximum position; you can adjust the flame length between
maximum and min. positions. Do not operate the burners when the knob position is between
maximum and off positions.
After the ignition, check the flames visually. If you see yellow
tip, lifted or unstable flames; turn the gas flow off, and check
the assembly of burner caps and crowns (Figure 13). Also,
make sure that no liquid has flown into the burner cups. If
the burner flame goes out accidentally, turn the burner off,
ventilate the kitchen with fresh air, and do not attempt re-
ignition for 90 sec.
When turning the hob off, turn the knob in the clockwise
direction so that the knob shows "0" position or the marker
on the knob points upwards.
Your hob has burners of different diameters. The most economic way of using gas is to choose the
correct size gas burners for your cooking pan size and to bring the flame to minimum position once
the boiling point is reached. It is recommended to always cover your cooking pan.
In order to obtain maximum performance from the main burners, use pots with the following flat
bottom diameters. Using smaller pots than the minimum dimensions stated below will cause
energy loss.
Rapid / Wok Burner: 22-26cm
Semi-rapid Burner: 14-22cm
Auxiliary Burner: 12-18cm
MAX. position
OFF position
Figure 12
MODULATE
MIN. position
Figure 13
Cap
Crown
Spark
Plug
Burner
Cup

4. USE OF YOUR PRODUCT
17
Make sure that the tips of the flames do not spread out of the outer circumference of the pan, as
this may also harm the plastic accessories around the pan (handles etc.)
When the burners are not in use for prolonged periods, always turn the main gas control valve off.
4.2. Use of Hotplates
There are 2 types hotplates
Standard hotplate
Rapid hotplate (which is marked by the red dot on the
hotplate surface)
These hotplates are controlled by a 6 position switch.
By switching the control knob to one of these positions the
hotplate can be operated. Near each hob control knob, there is
a small diagram that shows which hotplate is controlled with
that knob. On/off light on the control panel shows if any of the
hotplates are in use.
.
Warning:
• Use only flat pans and with a sufficiently thick base.
• Ensure that the base of the pan is dry before placing it on the burners.
• The temperature of accessible parts may be high when the appliance is operating. So it is
imperative to keep children and animals out of the reach of the burners during and after
cooking.
• After use, the hob remains very hot for a prolonged period of time, do not touch it and do not
place any object on top of the hob.
• Never place knives, forks, spoons and lids on the hob as they will get hot and could cause
serious burns.
•
•
!
Figure 14
Figure 15
1
2
34
5
6
0

Warning:
When the operating for the first time or whenever the hotplate has not been used for a prolonged
time it is necessary to eliminate any humidity which may have accumulated around the electrical
elements of the plate by operating the hotplate on its lowest setting for about 20 minutes.
Use only flat pans and with a sufficiently thick base.
Never use a pan with a smaller diameter than of the hotplate.
Ensure that the base of the pan is dry before placing it on the hotplate. While the hotplate is in
operation, it is important to ensure that the pan is centered correctly above the hotplate.
•
•
•
18
4. USE OF YOUR PRODUCT
!
Hotplate Knob Position - Function
0 Off position
1 To melt butter etc. and to warm small quantities of liquid.
2 To warm bigger quantities of liquid. To prepare creams and sauces.
3 To defrost food for cooking
4 To cook delicate meat and fish
5 To roast meat and steak
6 To boil big quantities of liquid or to fry.
CORRECT INCORRECT
circular saucepan base INCORRECT
saucepan’s base had not settled
INCORRECT
small saucepan diameter
Figure 16
•
• Never operate the hob without pans on the hotplate.
• The temperature of accessible parts maybe high when the appliance is operating. So it is
imperative to keep children and animals out of the reach of the hotplate during and after the
operation.
• If you note a crack on the hotplate it must be immediately switched off and replaced.
Do not use cooking containers that protrude from the cookers' table and which are likely to
overheat the control levers.

4. USE OF YOUR PRODUCT
19
Place coffee adaptor on the Auxiliary burner grid when small
cookware is used to prevent the cookware from tipping over.
Coffee Adaptor (Optional)
Wok adaptor should be placed on the pan support of wok burner.
WARNING: Using wok pans without wok adaptor may cause the burner
to malfunction.
Please do not use wok adaptor with flat-bottomed saucepans. Likewise,
do not use convex-bottomed saucepans without the wok adaptor.
Wok Adaptor (Optional)
CORRECT INCORRECT
• To ensure long life, the hotplate must be thoroughly cleaned with appropriate cleaning
products. To avoid rustiness and to keep them new it is recommended to rub the hotplate
lightly with tissue with a small amount of oil. Do not use a steam cleaner.
• After use, the hotplate remain very hot for a prolonged of time, do not touch them and to not
place any object on top of the hotplate.
4.3 Accesorries