Odys DPF User manual

1
EN
Contents
1 Introduction..........................................................................................5
2 Placing into Operation..........................................................................5
3 Product Details .....................................................................................6
3.1 The Digital Photo Frame..............................................................6
3.2 The Remote Control.....................................................................7
4 Installing for the First Time..................................................................8
5 Operation..............................................................................................9
5.1 Digital TV (DVB-T).....................................................................9
5.2 DPF Functions............................................................................10
5.2.1 View Images (Photo)..........................................................10
5.2.2 Listen to Music (Music) .....................................................11
5.2.3 View Images with Sound (Photo+Music)..........................12
5.2.4 Watching Videos (Movie)..................................................12
5.2.5 Edit your Photos (Edit).......................................................12
5.2.6 View Favorite Images (Favorite)........................................13
6 Settings...............................................................................................13
6.1 DPF Setup...................................................................................13
6.2 DTV Setup..................................................................................14
6.3 System Setting............................................................................16
7 Accessories.........................................................................................18
7.1 Calendar......................................................................................18
7.2 Clock ..........................................................................................18
7.3 Alarm..........................................................................................19
7.4 Auto-Power ................................................................................19
8 Technical Data....................................................................................20
9 Warranty condition.............................................................................20

2
EN

3
EN
Safety instructions
Thank you for choosing our product. Please read this manual carefully and
observe all safety and operating instructions. Store the manual in a safe
place for later reference.
The flash symbol displayed in a triangle warns the user of dangerous electrical
voltages inside the device that could lead to electrical shocks with harmful effects
to health if the device is used incorrectly.
or The exclamation point displayed in a triangle in the documentation
indicates dangers when using and maintaining the device.
The information symbol in the documentation indicates useful information and tips
for using and maintaining the device.
Power supply
Connect the power supply cable to the DC 12V IN jack on the right side of the
device. Connect the power plug to an earthed socket AC 100-240 V. If you have
problems when plugging the mains plug into the socket, rotate the plug by 180°
and plug it in again.
Tips regarding environmental protection
At the end of its operating life, this product may not be disposed of by
way of your normal household waste. Instead it must be delivered to a
collection point for recycling electrical and electronic equipment. The
icon on the product, in the operating instructions or on the packaging,
indicates this.
The materials used in manufacturing this product are recyclable,
depending on their identifying markings. By recycling this equipment,
by recycling its components, or through other procedures of re-using
outdated equipment, you are making an important contribution to
protection our environment. Please ask you local municipal
administration for the location of the corresponding recycling point.

4
EN
Caution
Read, keep and follow these instructions and heed all warnings.
•Do not open the casing of the device under any circumstances, and do not attempt to repair or modify the
device. Malfunctions, damage, electric shocks and fires can occur as a result.
•Never expose the device to rain, moisture or humidity. Malfunctions, damage and electric shocks can
occur as a result.
•When cleaning the device, do not use any volatile substances, such as solvents, to avoid damaging the
surface. Clean the device only using a soft, dry cloth.
•Ensure adequate air circulation around the device. Do not place the device on soft furniture, carpets or
other materials while in operation, as this may restrict the air from properly circulating around the device.
•The device may not be excessively heated or operated near heat sources (e.g. heaters). Malfunctions,
damage, smoke and fires can occur as a result.
•Connect the device only to mains sockets that are properly earthed (protective earth). The mains voltage
must correspond to the operating voltage of the device indicated on the device housing. When connecting
the device to other electric devices, always follow the manufacturer's instructions.
•Make sure that the cables are not damaged, stretched or twisted and that no short circuits occur.
•Use only accessories specified or supplied by the device manufacturer. This also applies to any
attachments and fasteners.
•Place the device in a secure spot where it cannot shift or fall. If used in a vehicle, the
device must be securely fastened to avoid injuries or accidents resulting from the device
shifting or falling down.
•During a thunderstorm, disconnect the device from the mains. Do not use the device during a
thunderstorm. Malfunctions, damage and electric shocks can occur as a result. Disconnect the power plug
from the socket when you do not use the device for an extended period of time. Keep the device in a
clean, dry location where it is not exposed to direct sunlight.
Caution
•In case of malfunctions or damage, maintenance or repair work may be required. Do not use the device if
there is visible damage to it. All maintenance and repair should be conducted by qualified service
technicians only.
•Do not place any heavy objects and objects that contain liquids, such as vases, on top of the device..
•Make sure that no objects or fluids can penetrate into the device though openings or venting slots. This
could lead to short circuits, damage, electric shocks and fires.
•Do not touch the TFT LCD screen with your bare hand.
•Observe the safety instructions on rechargeable batteries in chap. 5.1.

5
EN
1 Introduction
Dear Customer,
We wish to thank you for purchasing this digital picture frame. To effectively use
the product, please read the operators manual thoroughly and pay close attention
to all notices and tips.
2 Placing into Operation
The photo frame may be set up vertically or horizontally by turning the bracket to
the desired position. The power supply may now be connected to the digital photo
frame. Place a memory card into the slot provided. The digital photo frame
supports the following memory card types: SD-Card, MMC-Card, memory sticks
and USB storage media. Connect a DTT (DVB-T) antenna for use as DTT TV.
Turn the power switch, located on the left side of the photo frame to “ON”.

6
EN
3 Product Details
3.1 The Digital Photo Frame
Operation Area Photo Frame
1. Stop
2. Play/Pause
3. Up
4. Right
5. Down
6. Left
7. Menu
8. TV / Radio
9. Slot for SD/MMC-Card or
Memory-Stick
10. USB-Slot
11. Power Connection
12. Antenna Connection
13. Earphones Output
14. Audio/Video Output
15. ON / OFF Switch
16. Speakers
17. Bracket
13
12
17
11
14
10
15
16
9
16

7
EN
3.2 The Remote Control
Power on/off
TV/RADIO Switch between TV/Radio
INFO Show the present channel
information
Mute
1-9, 0 For channel select
Fast Reverse
Fast forward
RECALL Return to the previous channel
FAV Turn on favorite program function|
Skip backwards
Skip forwards
SETUP Setup
Play/pause, Program List in DTV
Mode
Stop
Direction button /Flip photo
horizontally / Channel up
Direction button / Flip photo
vertically / Channel down
OK Enter
Direction button / Rotate photo
Direction button / Rotate photo
REPEAT Repeat
EXIT Exit Setting or Mode
MENU Go back to main menu
LIST Program Edit List
TTX Teletext Mode
EPG EPG (Electronic Program Guide)
VOL+ Increase volume
VOL- Decrease volume
AUDIO Enter audio mode(if available)
SUBTITLE Enter subtitle mode(if available)

8
EN
4 Installing for the First Time
If installing for the first time, the following installation assistant will appear.
Select "Yes" and press the "OK" button to start
the installation.
Using the () buttons, select the settings you wish to change and confirm
by pressing the "OK" key.
Select the country in which the device is to be
used.
For England, select "England" and confirm by
pressing the "OK" key.
Set the desired menu language under the field
"Language".
For English, select "English" from the drop
down menu and confirm by pressing the "OK"
key.
Set the desired time zone under the field "Time
Zone".
For England, select "GMT+00:00“ and confirm
by pressing the "OK" key.
Using the arrow keys, select "NEXT" to
continue the installation and confirm with the
"OK" key.
If you wish to receive DVB-T stations, the next
step will automatically search for DVB-T
stations in your area.
Connect the antenna to device. Using the arrow
keys, select "YES" to start and confirm by
pressing the "OK" key.

9
EN
5 Operation
The digital photo frame may be controlled using either the keys on the back of the
frame or by using the remote control provided. Switch the digital photo frame ON
using the ON / OFF key.
Use the direction keys to select the
desired function and confirm by
pressing the OK key.
The digital photo frame is delivered with the factory settings in English. To
change the language, press the Quick Selection key “Setup” and select“
System Setting”. Press OK to enter the settings and press two times to
enter the OSD language settings. Select your desired language and
confirm using the OK key.
5.1 Digital TV (DVB-T)
Using the direction keys, select the menu „Digital TV“ and confirm by pressing the
OK key.
Key Function
TV/Radio Toggle between TV and Radio
Info Show channel Information
0-9 Select station
RECALL Toggle between the current and last
viewed Station.
FAV Turn on/off favourite mode
SETUP Enter Setup
PLAY/PAUSE Show Stations List
/ Channel up / Channel down
EXIT Exit DVB-T Settings
MENU Go to Main Menu
LIST Open Program Edit List
TTX Enter Teletext
EPG Enter EPG
Vol+ / Vol- / / Increase / Decrease Volume
RED Audio Language
GREEN Subtitle
YELLOW No Function
BLUE No Function
DVB-T Radio is only available in some areas.
Audio Language and Subtitles are only provided by some few stations.

10
EN
5.2 DPF Functions
You can use the Repeat key on the remote control to set different repeat
functions for the different replay modes. Enter the desired mode and start
playback. Select repeat function by pressing the Repeat key. Each key stroke will
change the mode as follows: Off - Track - Folder - All.
Off – All Tracks, Videos or Photos will be played one time
Track – The current track will be played continuously
Folder – The current folder will be played continuously
All – All Tracks, videos or Photos will be played continuously
5.2.1 View Images (Photo)
Using the direction keys, select the menu „PHOTO“ and confirm by pressing the
OK key. A slide show of all images will start automatically.
Key Function
TV/Radio Switch to TV Mode
Info Show picture Information’s
/ Previous Picture / Next Picture
SETUP Enter Setup
PLAY/PAUSE Play/Pause Slideshow
STOP Stop Slideshow and open Thumbnail mode
REPEAT Select repeat function
Flip Horizontally
Flip Vertically
Rotate left
Rotate right
EXIT Exit to DPF Menu
MENU Go to Main Menu
When inserting the memory card, insure that the writing is pointing
inwards.

11
EN
Thumbnail Mode
In the Thumbnail Mode you can rotate photos
for the slideshow.
Select “Rotate” to change to rotate mode.
Choose images to rotate by using the arrow
keys and mark them with OK.
Use the arrow keys to move to the “Reset”
button to undo the rotations or “Return” to return to the Thumbnail Mode.
Select “Slideshow” and press OK to start the slide show.
Press /to move to the previous or next Thumbnail page.
5.2.2 Listen to Music (Music)
Use the "/ " keys to select the menu
"Music" and confirm by pressing OK. All MP3
music files found on the data storage device will
be shown. Select a title and press the
"Play/Pause" key to start playback.
Press the Vol+ -key to increase the volume.
Press the Vol- - key to decrease the volume.
Key Function
TV/Radio Switch to TV Mode
/ Rewind / Fast Forward
/ Previous Track / Next Track
SETUP Enter Setup
PLAY/PAUSE Play/Pause
/ / / Move to specific Folder or file
OK Select Folder or Track
REPEAT Select repeat function
EXIT Exit to DPF Menu
MENU Go to Main Menu
Please start the Slideshow as described above otherwise the rotations will
not be stored.
Use the remote controls “Exit” key only to discard the changes and return
to the DPF menu.
If you return to the DPF or Main Menu the rotations will be reset.
The thumbnail mode is only available if this function is enabled in the
DPF Setup (Chapter 6.1 – Photo Setting - Browse)

12
EN
5.2.3 View Images with Sound (Photo+Music)
Using the direction keys, select the menu „PHOTO-MUSIC“ and confirm by
pressing the OK key. A slide show of all images will start automatically. If music
files (mp3 format) are stored on the same storage they will be played
simultaneously.
5.2.4 Watching Videos (Movie)
Use the "/ " keys to select the menu
"Movie" and confirm by pressing OK. All mpeg
video files found on the data storage device will
be shown. Select a video and press the
"Play/Pause" key to start playback.
Press and hold the Vol+ -key two seconds to increase the volume.
Press and hold the Vol- - key two seconds to decrease the volume.
Key Function
TV/Radio Switch to TV Mode
Info Show file information
/ Rewind / Fast Forward
/ Previous Track / Next Track
SETUP Enter Setup
PLAY/PAUSE Play/Pause
REPEAT Select repeat function
EXIT Exit to DPF Menu
MENU Go to Main Menu
5.2.5 Edit your Photos (Edit)
Using the direction keys, select the menu „EDIT“ and confirm by pressing the OK
key.
Copy
Select “Copy” to copy photos to the internal memory.
Select the images to be copied by using the arrow keys and mark them with OK.
Use the andkeys to move or the “Save” button to saving the selected files to
the internal memory or “EXIT” to return to the DPF menu without saving changes.
Delete
Select “Delete” to remove images from the internal memory or to change the
image order.
Use the arrow keys to select either the “Delete” or “Sort” buttons. Press OK to
select.

13
EN
While in the delete mode press OK or Play to delete the currently highlighted
image.
Select “Delete all” and press OK to delete all photos from the internal memory or
select “Return” to return to the edit mode.
While in the sort mode use the OK or Play keys to select an image and move it
using the arrow keys. Press OK again to change the order.
Select “Slideshow” and press OK to start the slide show or select “Return” to
return to the edit mode.
Press the exit button on the remote control to open the DPF menu.
The device's internal memory can be used to store up to 15 images.
You can select up to ten pictures at once to copy to the memory.
5.2.6 View Favorite Images (Favorite)
Using the direction keys, select the menu „Favorite“ and confirm by pressing the
OK key. The slideshow of your favorite images starts immediately.
6 Settings
DTV Setup is only available if the DTV Mode has been previously
selected.
6.1 DPF Setup
Select the menu "Setup" and confirm by
pressing OK or press the quick selection key
"Setup". Select “DPF Setup” and press OK.
Use the /keys to select the desired
function and use/to change the settings.

14
EN
Confirm your changes by pressing the OK key.
Move to the “Exit” button and press OK to go back to the settings menu.
Photo Settings
Interval Time Set the interval time length a photo is to be displayed. If set to
“Off” photos may only be changed manually.
Transition Effect Set the transition effect between photos.
Show Type Set how the photos should be prompted.
Fit screen – Will display the photos original format
Full screen – Will display the photos full screen and cut off
the top and bottom sections.
Browse Changes the prompt after stopping the slideshow.
Thumbnail – Displays the photos with thumbnail preview
File Manager – Shows the file and folder structure
Auto-Play
Enable (On) or Disable (Off) the auto playback function for Photos, Music and
Movies. The device starts playback automatically if the function is set to “On” and
one of the DFP Menu functions (Photo, Music or Movie) has been selected and
confirmed.
Exit
Move to this Icon and press OK to exit.
6.2 DTV Setup
Select the menu "Digital TV" and confirm by
pressing OK.
Press the “Setup” key to enter DTV setup.
Select “DTV Menu” and press OK.
Use the /keys to select the desired function
and use/to change the settings. Confirm your changes by pressing the OK
key.
To go back to the settings menu, press the “Exit” button and confirm with OK.
Program List
Edit the stored stations using this function.
Select “TV Program” or “Radio Program” and
confirm with OK if you wish to modify the TV or
Radio stations settings. Within this Function it is
possible to mark the Stations as Favorits, move
them to another Channel Number or delete them
from the stations list.

15
EN
Select and move the stations using the /
keys. Switch between the three functions using
the /keys.
Mark as Favorite
Insure that the cursor (dark blue field) is within the “Favor” row.
Go to a station that you wish to mark and press OK.
Move station
Insure that the cursor (dark blue field) is within the “Move” row.
Go to a station you wish to move and press OK.
Move the station to the desired position and press OK to confirm.
Delete station
Insure that the cursor (dark blue field) is within the “Del” row.
Go to a station you wish to delete and press OK.
Press the “Exit” key to exit and save all changes.
With “Sort” you can sort all channels by Name, Service ID or Channel No.
Program Search
Automatic Search - Search automatically for
digital TV and Radio stations.
Manual Search - Search manually by Channel
Number
Parental Control
Use this setting to lock station. These stations
may only be viewed by entering a password. The
default Password for entering the settings is
“8888”.
Channel Lock – Enable or disable the channel lock
Parental Setting – Select the channel you wish to lock with /and press OK to
confirm. Press "Exit" to save changes and exit.
The Password may be changed in the System settings menu:
System Setting – Preference – Change PIN.
System Setting
Country
Select your country and region to search for
channels.

16
EN
Language
Change the language settings for Audio and subtitle information.
GMT Usage
Enable or disable the automatic time synchronization.
Time Zone
Set the time zone.
Region Setting during winter time Setting during summer time
England+ Portugal +00:00 +00:01
Western Europe
(Germany, France, …) +00:01 +00:02
Eastern Europe +00:02 +00:03
System Schedule
You can schedule up to ten Tasks to
automatically switch to a program you wish to
view at a specific time.
Mode Activate or deactivate the task
Frequency Set the task interval (Once, Daily, Weekly)
Channel Type Set TV or Music (Radio) as source
Channel No Set the channel number
Time Setting Set the time you wish to start and end the schedule.
NOTE:
The device must be on or in the standby mode for this function to work.
Exit
Move to this Icon and press OK to exit.
6.3 System Setting
Select the menu "Setup" and confirm by
pressing OK or press the quick selection key
"Setup". Select “System Setting” and press OK.
The first Icon “Language Setup” is highlighted,
select one of the Settings options using the /keys.
Use the /keys to select the desired function and use/to change the
settings. Confirm your changes by pressing the OK key.
Move to the “Exit” button as described above and press OK to go back to the
settings menu.

17
EN
Language Setup
Change the language settings for the OSD prompt and the font encoding format.
Changing the Language setting
1. Press the “SETUP” key and select “System Setting” by using the /keys.
2. Press “OK” to enter the settings. The first Icon “Language Setup” is highlighted.
3. Press thekey two times to enter OSD and select the current language.
4. Use the /keys to select the desired language and press OK to confirm.
Display Setup
TV Standard Change the TV Standard
Display Type Change the display aspect rate.
4:3 PS - Cuts off the top and bottom sections to show a full
screen picture with the correct aspect ratio
4:3 LB - Creates a wide screen simulation with black bars at
the top and bottom of the screen.
16:9 - Creates a full screen 16:9 format picture prompt
Brightness Use one of the Brightness presets Normal, Bright or Soft.
Contrast Modify the display contrast.
TFT Brightness Modify the display brightness.
TFT Contrast Modify the display contrast.
TFT Saturation Modify the display saturation.
Preference
UI Style You may change the colors of all prompts and menus using
this function.
Change PIN Change the PIN Code for locking stations.
Default Reset the system settings to the default status
Exit
Go to this Icon and press OK to exit.

18
EN
7 Accessories
Some additional functions are available in this section.
Select the desired function using the
/keys and confirm using the OK key.
For these functions the device should be constantly connected to power
and the main switch on the back of the device must be in the “On”
position.
7.1 Calendar
Display
If “Display” is selected press OK to prompt the Calendar.
Set Date
Use the /keys to select “Set Date” and press
OK to confirm.
Use /to select the value you wish to modify.
Modify the value using the /keys.
Use the /keys to select OK to save or
CANCEL to quit.
Exit
Select Exit and press OK to go back to the
Accessories Menu List.
To return to the Accessories Menu press the Exit
key at any time.
7.2 Clock
Display
If “Display” has been selected, press and
select "Clock" or "Calendar with Clock" using the
/keys then OK to confirm.
Set Time
Use the /keys to select “Set Time” and press
OK to confirm.
Use /to select the value you wish to modify.
Modify the value by using the /keys.
Use the /keys to select OK to save or CANCEL to quit.

19
EN
Exit
Select Exit and press OK to go back to the Accessories Menu List.
To return to the Accessories Menu press the Exit key at any time.
7.3 Alarm
Enable
If “Enable” is selected, press and select "ON"
or "OFF" using the /keys then OK to
confirm.
Set Time
Use the /keys to select “Set Time” and press OK to confirm.
Use /to select the value you wish to modify.
Modify the value by using the /keys.
Use the /keys to select OK to save or CANCEL to quit.
Exit
Select Exit and press OK to go back to the Accessories Menu List.
To return to the Accessories Menu press the Exit key at any time.
7.4 Auto-Power
Power On Enable
If “Power On Enable” is selected, press and
select "ON" or "OFF" using the /key then
OK to confirm.
Power Off Enable
If “Power Off Enable” is selected, press and
select "ON" or "OFF" using the /key then OK to confirm.
Set Time
Use the /keys to select “Set Time” and press OK to confirm.
Use /to select the value you wish to modify.
Modify the value by using the /keys.
Use the /keys to select OK to save or CANCEL to quit.
Exit
Select Exit and press OK to go back to the Accessories Menu List.
To return to the Accessories Menu press the Exit key at any time.

20
EN
8 Technical Data
•Compatible with SD-Cards, MMC-Cards, Memory Sticks and USB
Storage Data.
•7" 16:9 TFT Display
•Screen resolution 480 x 234 pixel
•Dimensions: 217 x 141 x 26 millimetres
•Weight: 421 grams
•Adapter: 220 Volt, 12 Volt, 1 Amp
•Power Consumption 8W
9 Warranty condition
The following conditions comprise the requirements and scope of our warranty conditions
and do not affect our legal and contractual warranty obligations.
We offer a warranty on our products in accordance with the following
conditions:
1. Odys products are covered by a 24 month warranty. We will resolve damages or defects on
Odys products free of charge within 12 months of the purchase date under the following
warranty conditions. For any damage or defect determined later than 12 months after the
purchase date, proof of a manufacturing fault must be submitted for repair under warranty.
The warranty does not cover batteries and other parts, which are considered consumables,
parts that break easily such as glass or plastic or defects based on normal wear and tear. There
is no warranty obligation in the event of marginal differences compared to the target
appearance and workmanship provided these have a negligible effect on the product's fitness
for use, in the event of damage caused by chemical or electrochemical effects, by water or
generally from abnormal conditions.
2. The warranty will be performed in such a way that we shall decide whether to repair the
defective parts or to replace them with working parts free of charge. AXDIA reserves the right to
exchange the product for a replacement product of equal value if the product that is sent in
cannot be repaired within a reasonable time or at reasonable cost. The product can also be
exchanged for a different model of the same value. Requests cannot be made for repairs to be
carried out on site. Parts that have been replaced or exchanged become our property.
3. The warranty claim does not apply if repairs or other work is carried out by unauthorized
persons or if our products are equipped with additional parts or accessories that are not
approved for our products.
4. Warranties that have been activated do not cause the warranty period to be extended, nor do
they trigger a new warranty period. The warranty period for any replacement parts installed
ends with the warranty period for the entire product.
5. Any other or further claims are excluded, especially those for replacement due to damage
caused outside of the product, provided there is no obligatory legal liability. We therefore accept