Odys DPF 700 User manual

1/5
DIGITAL PHOTO FRAME
U
U
US
S
SE
E
ER
R
R M
M
MA
A
AN
N
NU
U
UA
A
AL
L
L
CONGRATULATIONS on your purchase of our 7’’LCD Digital Photo Frame. Please read carefully and
follow all warnings and instructions in this User’s Manual and those marked on the product before first
use. Failing to follow these warnings could result in personal injury or damage to the Digital Photo Frame.
Also, remember to keep this User’s Manual in a convenient location for future reference.
Important: Save the original box and all packing material for future shipping needs.
IMPORTANT PRODUCT SAFETY INSTRUCTIONS
Proper Handling of the Digital Photo Frame
Always handle the Digital Photo Frame with care. Avoid touching the LCD screen as natural skin oils are
often difficult to remove.
Always position the Digital Photo Frame on a stable and level surface. Unstable surfaces can cause the
Digital Photo Frame to topple and fall, resulting in possible damage or injury.
Avoid exposing the Digital Photo Frame to direct sunlight or high temperatures, which can damage or
shorten its useful life. Do not place the unit near heat sources such as radiators, heat registers, or other
appliances that generate heat. Orient the Digital Photo Frame away from direct sunlight to reduce glare.
Avoid exposing the Digital Photo Frame to rain, water, moisture or high humidity. Do not place it in a
bathroom or kitchen near a sink or where it may come in contact with water.
Never place heavy or sharp objects on the LCD panel, frame, or power cord.
Overloading Outlets
Do not overload electrical power sources when using the Digital Picture Frame. Overloading wall outlets,
or extension cords can result in overheating, fire, or electric shock. Use only grounded or polarized
outlets.
Power Cord Protection
Minimize wear on the power supply cord. The power supply cord should be routed away from foot traffic

2/5
and contact with other objects. Do not route the power cord under rugs or carpeting. The cord should
never be severely bent, pinched, or twisted. Periodically inspect the power cord and each end of the cord
for wear or damage. Periodically inspect the power cord and each end of the cord for wear or damage.
Ventilation
Slots and openings on the Digital Photo Frame are provided for ventilation purposes. To ensure reliable
operation of the product and to protect it from overheating, these openings must not be blocked or
covered. Keep the Digital Photo Frame a minimum of four (4) inches away from any wall to assure
sufficient airflow and ventilation. Increased temperatures may cause fire or device failure.
To assure proper ventilation, do not block the openings by placing the Digital Photo Frame on a bed,
sofa, rug or other similar surface. Do not place it in a built-in installation, such as a bookcase or enclosed
rack, unless proper ventilation is provided.
Other Notices and Precautions
Caution: Never remove the plastic casing. There are no user serviceable parts inside. The Digital Photo
Frame contains high voltage parts. You may be seriously injured if you touch them.
Do not attempt repairs yourself. The warranty does not cover repairs or attempted repairs by anyone not
authorized by Authorize Dealer. Refer all servicing and repairs to qualified service personnel.
If the Frame begins to emit smoke, an abnormal noise, or a strange odor, immediately turn it off and
unplug the power cord. Contact the Authorize Dealer Service Center.
If the Digital Photo Frame will not be used for an extended period of time, unplug the power cord.
Cleaning the Digital Photo Frame
•MAKE SURE THE DIGITAL PHOTO FRAME IS TURNED OFF
•NEVER SPRAY OR POUR LIQUID DIRECTLY ONTO THE SCREEN OR PLASTIC CASING
To Clean the Screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner on a
clean, soft, lint-lint-free cloth to clean the screen.
To Clean the Plastic Casing:
1. Use a soft, dry cloth.
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, and mild
non-abrasive detergent on a clean, soft, lint-free cloth to clean the surface.
To Clean the Frame:
Use a soft, dry cloth.
Disclaimer
Your Authorize Dealer does not recommend the use of any ammonia or alcohol-based cleaners on
the LCD screen or plastic casing. Some chemical cleaners have been reported to damage the screen
and / or display case. Your Authorize Dealer will not be liable for damage resulting from the use of any
ammonia or alcohol-based cleaners.
Tips regarding environmental protection
At the end of its operating life, this product may not be disposed of by way of your normal household waste. Instead it must
be delivered to a collection point for recycling electrical and electronic equipment. The icon on the product, in the operating
instructions or on the packaging, indicates this.
The materials used in manufacturing this product are recyclable, depending on their identifying markings. By recycling this
equipment, by recycling its components, or through other procedures of re-using outdated equipment, you are making an

3/5
important contribution to protection our environment. Please ask you local municipal administration for the location of the
corresponding recycling point.
I
In nt tr ro od du uc ct ti io on n t to o a ap pp pe ea ar ra an nc ce e
Key Function
key For setting the interval time of playing the photo.
key For switching over the frame display type.
key Rotate the picture
key For playing or pausing. Hold it for five seconds to turn on or
shut off the machine (Note 1)
key Skip to anterior photo.
key Skip to next photo.
.
.N No ot te e1 1: :S Sh hu ut t o of ff f o or r t tu ur rn n o on n t th he e p po ow we er r s su up pp pl ly y o of f t th he e d di is sp pl la ay y s sc cr re ee en n b by y h ho ol ld di in ng g t th he e k ke ey y l lo on ng g t to o e en nt te er r o or r e ex xi it t
s
st ta an nd db by y m mo od de e. . I If f t th he e p ph ho ot to o f fr ra am me e i is s o ou ut t o of f u us se e t te em mp po or ra ar ri il ly y, , i it t i is s p pr ro op po os se ed d t to o u us se e t th hi is s k ke ey y t to o s sa av ve e p po ow we er r
a
an nd d p pr ro ot te ec ct t s se er rv vi ic ce e l li if fe e o of f t th he e s sc cr re ee en n. .
N
No ot te e 2 2: : P Pu ul ll l o of ff f t th he e p po ow we er r a ad da ap pt te er r, , t th he e m ma ac ch hi in ne e w wi il ll l b be e t tu ur rn ne ed d o of ff f c co om mp pl le et te el ly y f fo or r l lo on ng g; ; i if f t th he e d de ev vi ic ce e i is s o ou ut t
o
of f u us se e f fo or r l lo on ng g, , i it t i is s p pr ro op po os se ed d t to o p pu ul ll l o of ff f t th he e p po ow we er r a ad da ap pt te er r. . P Pl le ea as se e a at tt te en nt ti io on n: : o on nc ce e t th he e p po ow we er r a ad da ap pt te er r i is s
p
pu ul ll le ed d o of ff f, , a al ll l o of f s se et tt ti in ng gs s o of f t th he e p pi ic ct tu ur re e f fr ra am me es s w wi il ll l r re ev ve er rt t t to o d de ef fa au ul lt t s se et tt ti in ng gs s. .
A
Ac cc ce es ss so or ri ie es s
zPower adapter
zOperation manual
zBracket
zWarranty Card
Power
Interface
(
Note 2
)
SD card slot
Bracket

4/5
S
St ta ar rt t t to o u us se e

 Install the memory card
Insert SD / MMC card saved with photos to the card slot of the photo frame.
•Don’t change the SD / MMC card while Picture Frame is powered on!
If you want to change the card turn the power off at first.
•Please insert the card in a correct direction. Do not apply too strong a force when inserting
the card to prevent damaging the card or the component of digital photo frame. Please
check for a correct inserting direction if it can not be done.
•Don't insert or pull out the saving card while reading information.
Connect the power supply
Insert one end of the power adapter to the AC power socket, and the other end to the DC socket at the
back of the photo frame.
Power on
The photo frame can be turned on automatically when the photo frame is connected to the power supply.
Power off
Disconnect the power supply; the digital photo frame will be turned off.
Description of function
It will begin to play photo automatically after power on.
After power on, hold for 5 seconds, power supply of display screen may be turned on/off to
enter/ exit stand-by mode.
Press the key to set the interval time of playing the photo. There are 10 options of 5s, 15s, 30s, 60s,
5 minute, 15 minute, 30 minute, 45 minute, 1hour and infinite.
(Note: The setting only controls interval to play pictures, excluding the time to reading pictures; and
some reading time may be extended for format or size of picture)
Press the key to switch over the frame display type. There are 4 options of fill, original, auto fit, pan
scan.
Mode Description
fill Extend the frame to fill the whole screen
original Zoom the frame to original size
auto fit Automatically fit the screen subject to the upper and lower boundary of the screen
pan scan Intercept picture automatically to display in full screen.
Press to rotate the picture (rotate by 90 degrees each time).

5/5
Press key to pause the play during the photo play. Press again key to resume the normal play.
Press key under the play and pause mode to jump to the next file and play.
Press key to jump to the previous file and play.
T
Te ec ch hn ni ic ca al l p pa ar ra am me et te er r
LCD display screen 7〞TFT LCD，480×234 pixels
File format JPEG
Storage media SD / MMC card
Power adapter AC110~220 input，DC12V output
Size (L×W×H) 230 mm × 167 mm× 29 mm