OEM H-ANDROID PLUS NEW User manual

H-ANDROID PLUS NEW
Owner's Manual
Manual del Usuario

EN-1
Precautions
To ensure safe driving, please adjust the
volume to a safe & comfortable level in case
of emergency situations.
Never expose this unit, amplier or speakers
to moisture or water to prevent electronic
sparks or res.
Please don’t change the fuse on the power
cord without professional guidance, using
an improper fuse may cause damage to this
unit or even cause re.
Please power off this unit at once and send it
back to the after-sales service center or the
dealer /distributor you purchased from if one
of the following symptoms is found:
(a). No audio output;
(b). No image output;
(c). Water or other obstacle enters the unit;
(d). Smoking;
(e). Peculiar smell.
Only connect the unit to a 12-volt power
supply with proper negative grounding.
MUTE
OK
MUTE
OK
Never install this unit where the operation
and condition for driving safely is
compromised.
MUTE
OK
MUTE
OK
Never use the video display while the car
is in motion. The use of video playback
while driving is a violation of trafc laws and
increases the risk of trafc accidents.
MUTE
OK
MUTE
OK
MUTE
OK
MUTE
OK
Thank you for purchasing this product.
Please read through the Owner’s Manual to
learn how to properly operate the unit. After
you have nished reading the manual, please
keep it in a safe place for future reference.
To provide a clear demonstration and an
alternative for easy understanding of the
operation of this unit, graphic illustration
was used. However, this illustration is not
necessary printed as the actual image found
on the unit.

EN-2
Warning
Operate the unit correctly according to the
instruction manual to prevent unnecessary
problems.
CAUTIONS ON HANDLING
This product is a CLASS 1 LASER PRODUCT.
Use of controls or adjustments or performance
of procedures other than those specified
herein may result in hazardous radiation
exposure. Do not open covers and do not
repair yourself. Refer servicing to qualified
personnel.
Two laser products
Wave length: CD: 780mm DVD: 650mm
Laser power: No hazardous radiation is
emitted with safety protection.
To reduce the risk of fire electric shock, and
annoying interference, use only the included
components.
Caution of disc using
1. DO NOT use irregular shaped disc.
2. Disc Cleaning. Use a dry, soft cloth to
wipe the disc from center to edge, only neutral
detergent can be used.
3. When playing a new disc. New disc may
have some rough spots around the inner and
outer edges. If such a disc is used, remove
these rough spots with a pencil or ball-point
pen, etc.
Precautions Contents
Precautions...............................................1
Control Panel ...........................................3
Remote Control.........................................4
Basic Operations......................................6
Main menu.................................................7
Disc Operation..........................................7
Radio Operations....................................10
USB Operations......................................12
Bluetooth Operations.............................15
SmartLink................................................17
Sound setting..........................................18
Internet ....................................................19
Other Mode..............................................20
System settings......................................21
Device Connections ...............................23
Troubleshooting .....................................25
Specications .........................................26

EN-3
Control Panel
Press [ ] button to turn on the unit.
1. Reset
Load factory settings
2. Eject disc (when disc inserted)
3. [ ] Button
> Power “ON” (press)
> Power “OFF” (long press)
> Mute the Volume (press)
4. [ ] Button
Show main menu (press)
Show main options(long press)
5. [ ] Button
Press to go back one step on any screen.
6. Volume /
Increase
/ Decrease the volume
7. Bluetooth MIC
8. Disc Slot
Insert the disc with label side facing up.
9. Map Card Slot
2
3
4
5
6
1
7 8 9

EN-4
Remote Control
1. Change playing source in sequence
2. Eject the disc
3. Select audio language
Show music catalog
4. Display playback information
5. Show home menu
6. Select radio band
7. Call out - Outgoing call
8. Zoom
9. DVD title
10. Repeat playback
11. Setup menu
12. Enter( OK key)
13. Move the cursor up/down/left/right.
Up/down: Manual tuning
14. Numeric keys
15. Mute the volume
16. Unit power
17. Select DVD subtitle language
18. Select DVD angle
19. Return to previous display
20. Main menu
21. Clear information
22. Hang up
23. Previous/Next
Auto tuning (long press)
Fast backward/forward (long press)
24. Display settings
25. Adjust volume
26. Play / Pause
27. Go-to search
28. Enter the EQ setting
MENU
EQ
OK

EN-5
Remote Control
Notes of remote control using
1) Aim the remote control at the remote sensor on the unit.
2) Remove the battery from the remote control or insert a battery insulator if the battery has not
been used for a month or longer.
3) DO NOT store the remote control under direct sunlight or in high temperature environment, or it
may not function properly.
4) The battery can work for 6 months under normal conditions. If the remote control doesn’t work,
change the battery.
5) Use“button shaped” lithium battery “CR2025”(3V) only.
6) DO NOT recharge, disassemble, heat or expose the battery to re.
7) Insert the battery in proper direction according to the ( + ) and ( - ).
8) Store the battery out of children reach it can be hazardous if swallowed to avoid the risk of
accident.
Uninstall Battery
Slide out the battery compartment tray
at the bottom on the back of the remote
control.
Install Battery
Use button-shaped lithium battery
CR2025 (3V)” only. Insert the battery
to the battery tray with proper direction
according to the (+) and (-) poles.
PULL OUTPUSH IN

EN-6
Basic Operations
Turn on/off the power
1. Press and release [ ] button to turn the
unit on.
2. Press and hold the [ ] button to turn the
unit off.
Note:
The unit will power on in the same state it
was in when powered off.
Mute
Press the [ ] button to mute the sound.
Note:
• Pressingthe[ ] buttonagainoradjusting
volumewillunmute.
Adjust the Volume
Press the [ ] or [ ] button to increase or
decrease the volume level.
The adjustable range of volume is 0 to 40.
Playing Source Selection
1. Press the [ ] button on the panel to
show main source menu.
2. Touch desired icon on the the screen to
enter corresponding working mode, such
as Disc, Navi, Radio, etc.
Drag left/right to scroll.
Note:
• When some devices are not ready, they
cannot be selected.
• You should stop switching when the playing
source you desired has been selected and
wait for some seconds, the unit will auto enter
the playing source mode you have selected.
When Vehicle is Put in
Reverse
If the rear view video camera is connected,
the unit automatically switches to CAMERA
source during reverse driving. The unit returns
to the previous source after the vehicle has
been taken out of reverse.
When Parking Brake Applied
1. If 'PRK SW' cable is connected to hand
brake switch, the video display of the TFT
monitor will be controlled by driving status,
system setup and input video sources.
2. When the car is moving forward, and a
video source is being played, the screen will
display a warning disclaimer and a blank
screen. The warning screen will prevent the
driver from watching images.
Customized
Press the [ ] of the main menu.
1. Choose theme:
[Theme 1], [Theme 2].
2. Choose wallpaper:
[Live wallpapers]: to show the wallpapers
with animation stored in the unit. Drag up/
down to scroll.
[Photo]: to visit the photo of mobile storage.
[Wallpapers]: to show the wallpapers stored
in the unit. Drag left/right to scroll.
Select desired picture to view, touch [Set
wallpaper] to conrm selection.
3. Choose LOGO

EN-7
Main menu
Main Menu
Touch the [ ] button to enter main source
menu.
1
910
876
2 543
1. Show current player source.
2. Enter customization menu.
3. Hold and drag down to show the
notications.
4. Car AV system source bar:
Touch and hold the center of the bar and
drag left/right to show more icons.
Touch desired icon to enter corresponding
mode.
5. Clock.
6. Enter music menu.
7. Enter radio mode.
8. Show applications list.
9. Enter bluetooth mode.
10. Enter setting mode.
Applications Menu
Touch [ ] to enter applications menu.
1. IN-CAR
Show the Car AV applications.
2. APPS
Show the Android applications installed.
In the list menu, drag left/right to scroll.
Touch and hold an icon for more than 2
seconds to add shortcut to the desktop. To
delete the shortcut, hold it and drag to the
[ ] on the top, and release after it turns
red.
Disc Operation
Insert a Disc
Insert a disc into the slot, and the unit will
change to disc mode automatically.
Notes:
• Please confirm whether there is a disc in
the unit before you insert another one.
• The unit will exit current playing source and
enter DVD mode when one disc is inserted.
• The following disc formats are supported:
CD-R, CD-RW, DVD-R, DVD+R, DVD-RW,
DVD + RW .
Eject the Disc
Press [ ] on the panel to eject the disc.
Notes:
• After ejecting the disc, the unit reverts to
another source automatically.
• If the disc is not removed from the unit
within 10 seconds, the disc will be reloaded
to prevent accidental damage.
DVD Playback Menu
During playback, touch the screen (except top
left corner) to show control buttons.
1
2 3 4 5 6 87
1. Return to home menu
2. Show DVD menu
3. Progress bar
4. Previous chapter
5. Play/Pause
6. Next chapter
7. Enter preset EQ menu
8. Show more control buttons

EN-8
Disc Operation
9 10 11 12 13 14
9. Repeat play
10. To enter search menu
11. Select audio channel
12. Select subtitle language
13. Select viewing angle
14. Hide the second line of control buttons
CD Playback
Insert a CD in the disc slot, and the unit will
read the disc. For some discs, you will need to
choose Music/Video/Photo for playback.
1
2 3 4 5 6
1. Return to home menu
2. Show le list
3. Previous track
4. Play/Pause
5. Next track
6. Show more control buttons
7 8 9 10
7. Sequential play
8. Repeat play
9. To enter search menu
10. Hide the second line of control buttons
Mixed Disc Playback
When inserting a mixed disc, the unit will read
the disc and show the files list. For some
discs, you need to choose Music/Video/Photo
to play back.
1
5
2
3
4
6
1. Return to home menu
2. Show music list
3. Show video list
4. Show photo list
5. Show the folders
6. File/Folder list
Drag the list up/down to scroll.
Touch a le name to visit it.
When viewing a picture, touch the screen
(except top left corner) to show control
buttons.
1
2 3 4 5 6 7
1. Return to home menu
2. Show le list
3. Previous picture
4. Play/Pause
5. Next picture
6. Zoom out/in
7. Rotate clockwise
* Video/Audio playback reference DVD/CD
playback.

EN-9
Stop Playback Temporarily
1. During playback, press [ ] to pause
playback. The sound will be muted.
2. Press [ ] to continue playback.
Select Desired Track/Chapter
Press [ ] or [ ] to skip to the previous or
next track/chapter.
Repeat
During playback, press [ ] button on screen
to select repeat playback mode.
[ ] Repeat single: Play the current single
repeatedly.
[ ] Repeat all: Play all in the disc
repeatedly.
[ ] Repeat off: Cancel repeat play.
[ ] Repeat chapter: Play the current
chapter repeatedly.
[ ] Repeat title: Play all chapters in the
title repeatedly.
Sequential Track Playback
(for CD/MP3/WMA Only)
You can play all the tracks in random order.
During playback, press [ ] button on the
screen to select random playback.
Disc Operation
Search
1. Touch [Goto] on the control bar.
2. Input the chapter number.
3. Touch [OK] to conrm.
DVD Audio Select
Press [ ] button to select audio language to
listen if the DVD has multiple audio languages.
VCD Audio Select
Press [ ] button to select audio channel to
listen (LEFT, RIGHT, MIXED, STEREO).
DVD Subtitle Select
Press [ Subtitle ] button to select the subtitle
language to show if the DVD has multiple
language subtitles.

EN-10
Radio Operations
Select [Radio] on the main menu to enter
radio mode.
1 2 4 53
76 8 9 10 1211
1. Return to home menu
2. Tune backward
Auto tune backward. (long press)
3. Current frequency
4. Tune forward
Auto tune forward. (long press)
5. Enter preset EQ menu
6. Enter favorite list
7. Search and store preset stations
automatically
8. Show discovery stations
9. Show favorite stations
10. Band switch
11. Preset stations of current band
12. Show more control buttons
13 14 15 16 17
13. Enter customized list
14. To receive local / distant radio stations
15. Goto station by inputting frequency
16. Mute radio
17. Hide the second line of control buttons
18. Show RDS options
Select One Radio Band
Touch the [ Band ] button to select one radio
band among FM, AM.
Manual Tuning
During manual tuning, the frequency will be
changed in steps.
Touch the [ ] or [ ] button on the
operation bar to tune in a lower/higher station.
Auto Tuning
Hold the [ ] or [ ] button on the
operation bar for more than 2 seconds to seek
a lower/higher station.
To stop searching, repeat the operation above
or press other buttons having radio functions.
Note:
Whenastationisreceived,searchingstops
andthestationisplayed.
Auto Store
Only stations with sufcient signal strength will
be detected and stored in the memory.
To start automatic station search, touch the
[ ] button on the operation bar.
To stop auto store, repeat the operation above
or press other buttons having radio functions.
Note:
Afterautostore,thepreviousstoredstations
willbeoverwritten.
Manual store
1. When one expected radio station has been
detected, touch [ ] to show customized
station store list.
2. Touch to select an item on the list to store
the current station in the memory.
3. Touch top left of the screen to exit.
18

EN-11
Radio Operations
Recall the Stored Stations
Method 1:
1. Touch [ ] button on the screen to
show the preset stations.
2. Select a band
3. On the middle of the screen, drag the list
left/right to scroll, touch a station on the list
to listen to.
Method 2:
1. Touch [ ] button on the screen to
show the favorite stations.
2. Select a band
3. On the middle of the screen, drag the list
left/right to scroll, touch a station on the list
to listen to.
4. Touch top left of the screen to exit.
Local Seeking
When LOCAL seeking is on, only radio
stations with strong radio signal will be be
received.
To open LOCAL function, touch [ ] button
on the operation bar, then touch the [ ]
button to select “Loc” or “DX”.
Note
Thenumberofradiostationsthatcanbe
receivedwilldecreaseaftertheLocseeking
modeison.
Key Search
Touch [ ] button on the operation bar to
show key search menu.
Touch the keypad to input the frequency,
touch [ OK ] to goto the station directly.
To cancel an input number, touch [ ].
RDS Basics
Radio Data System (RDS) enables traffic
reports to be received and provides many
facilities, including enabling the radio station
name to be displayed on the radio display.
Adjust RDS Settings
1. In Radio menu, touch [ ].
The option menu is displayed.
2. Touch on the selected option to change the
setting.
∙ [TA]: To turn on or off “TA” function.
∙ [AF]: To turn on or off “AF” function.
∙ [REG]: To turn on or off “REG” function.
∙ [CT]: To turn on or off “Clock Time”
synchronization function.
∙ [PTY]: To show PTY list.
TA
Press the TA ON/OFF button to switch the
priority for trafc announcements on or off.
AF
The receiver can automatically switche to an
alternative frequency (AF) of the same station
if the reception becomes poor. Press the OFF/
ON touch-point to turn the automatic scanning
for alternative frequencies of an RDS broad-
cast station off and on.
CT (Clock Time)
Some stations broadcast the time and date
within the encoded RDS signal. The clock
time is automatically adjusted when ‘CT’ is set
to ‘ON’.

EN-12
PTY Function
PTY is the abbreviation for Program Type
which is a code dening the type of program
being broadcast (e.g. News or Rock).
PTY options will display on the screen. To
view more PTY options, touch the scroll bar
and arrows on the screen.
When one PTY option is touched (e.g.
News), auto search for next available PTY
by increasing tuning frequency until the PTY
of the next station matches the current. If no
matched PTY has been found, the unit will
return to the original radio frequency.
Radio Operations USB Operations
Using USB device
1. Connect your USB device to the USB
cable.
When connecting a USB device, the unit
will read the les automatically.
2. To remove the USB device, you should
rst select another source, in order to avoid
damaging the USB device.
Music Playback
Select [Music] on the applications menu, the
unit will display all the music on the mobile
storages.
2
1 2
3
4
5
6
2
7
8
9 10
1. Return to home menu
2. Select le source
3. List the les by favorite
4. List the new les
5. List the les by song name
Touch a song to start play.
6. List the les by artist
Drag up/down to scroll.
7. List the les by album
8. Show the le
9. List window
Drag up/down to scroll.
Touch an item to select.
10. Enter search menu.

EN-13
USB Operations
2
111
12 13 14 15 16
11. Favorite
12. Show list menu
13. Previous track
14. Play/Pause
15. Next track
16. Show more control buttons
2
17 18 19 20
17. Sequential play
18. Repeat play
19. Follow your heart
20. Hide the second line of control buttons.
Play/Pause
When playing, press [ ] button to pause, and
the sound will be mute.
Press [ ] button to play.
Previous/Next Track
Press [ ] or [ ] button to go to previous or
next track.
Select Music by Artist
1. Touch [Artists] on the left of the screen.
2. Touch an artist shown on the list.
3. Select a song to play.
Select Music by Album
1. Touch [Albums] on the left of the screen.
2. Touch an album shown on the list.
3. Select a song to play.
Select Music by Song Name
1. Touch [Songs] on the left of the screen.
2. Select a song to play.
Playlists
Add a song to favorite playlist
1. Press a song and select [ ].
2. Add it to an favorite playlist.
If choose [Favorite], you need input a name
of the playlist.
Delete a song from favorite playlist
1. Touch [favorite], and select a playlist name
on the screen.
2. Press [ ] on the favorite playlist, then
remove it from playlist.
Video Playback
Select [Video] on the applications menu,
the unit will display all the video files on the
storages.
During playback, touch the screen(except top
left corner) to show control buttons.
1 2
3 4
1. Return to home menu
2. Select le source
3. Folder/File list
Drag up/down to scroll, touch to access.
4. Thumbnail

EN-14
USB Operations
5 6 7 8 109
5. Show list menu
6. Previous chapter
7. Play/Pause
8. Next chapter
9. Enter preset EQ menu
10. Show more control buttons
11 12 13
11. Sequential play
12. Repeat play
13. Show previous page of control buttons
Notes
• DisconnectUSBstoragedevicesfromthe
unitwhennotinuse.
• Donotuseunauthorizedproducts.
Gallery Operations
1. Select [Photo] on the APPS menu.
2. Select one gallery to show the picture list.
3. Touch to view it.
Drag left/right to scroll.
Touch top left corner to back.

EN-15
The Bluetooth allows you to utilize your car’s
built-in audio system for handsfree wireless
mobile phone or music communication. Some
Bluetooth mobile phones have the audio
features, and some portable audio players
support Bluetooth feature. This system can
play audio data stored in a Bluetooth audio
device. The car stereo with Bluetooth will be
able to retrieve phonebook contacts, received
calls, dialed calls, missed calls, incoming calls,
outgoing call and listen to music.
Notes:
• Thissystemwillnotoperateormayoperate
improperlywithsomeBluetoothaudio
players.
• Theunitcannotguaranteethecompatibility
ofallmobilephonestogetherwiththeunit.
• Audioplaybackwillbesettothesame
volumelevelassetduringtelephonecall.
Thiscancauseproblems,ifextremevolume
levelissetduringthetelephonecall.
Touch [Phone] on the main menu to enter
Bluetooth Phone mode.
1. If the Bluetooth function of the unit is off,
the unit will ask you to turn it on.
(Default setting is on)
2. Turn on Bluetooth function of your mobile
phone.
3. Search for new Bluetooth devices on your
phone. Select “OEM” from the pairing list
on the mobile phone, and enter password.
Or touch [ Scan ] button on the screen to
search mobile Bluetooth devices.
After connect successfully, the unit show
following menu.
Bluetooth Operations
Making a Call
• DialNumber
1. Input numbers by digit-keys on the screen.
Touch [ ] to clear the digits.
2. Touch [ ] button to dial out.
3. Touch [ ] button to terminate call.
• Answeringacall
You can answer an incoming call by pressing
the [ ] button.
Touch [ ] button to reject an incoming call.
• Disconnect
To disconnect a paired device, touch
[Disconnect] button.
Call from Phonebook
1. Touch [ Contacts ] button to show your
phone book.
2. Select a number to select and touch [ ]
button to dial out.
3. Touch [ ] to search a contact name.

EN-16
Bluetooth Operations
Call History
Access Call History by touching [ Call log ]
button.
Then select a number from Dialled/Missed/
Received calls.
Bluetooth Audio Streaming
What is audio streaming?
Audio streaming is a technique for transferring
audio data such that it can be processed
as a steady and continuous stream. Users
can stream music from their external audio
player to their car stereo wirelessly and listen
to the tracks through the car’s speakers.
Please consult your nearest dealer for more
information on the product of wireless audio
streaming transmitter offered.
CAUTION
Please avoid operating your connected
mobile phone while audio streaming as
this may cause noise or the sound to cut in
and out on playback.
Audio streaming may or may not resume
after telephone interrupt as this is
dependent on your mobile phone.
Touch [Streaming] button to play music on
your mobile phone.
: Previous track
: Play/Pause
: Next track
: Enter Bluetooth Phone
Bluetooth Settings
1. In Bluetooth menu,touch [ ].
The option menu is displayed.
2. Touch on the selected option to change the
setting.
∙ [Auto Connect]: To turn on or off “Auto
connect” function.
∙ [Auto Answer]: To turn on or off “Auto
answer” function.
∙ [PIN code]: To set paring code.
∙ [Phone Book sync]: To synchronize phone
book, touch [ Download ] on the sub-menu
popped out.
Phonebook sync may take several minutes
to load on initial setup.

EN-17
SmartLink
Overview of SmartLink
The system of the car device is Android
version, which supports the connection
between the car device and Smart phone.
And you can also control your phone by the
car device, such as receiving calls, dialing
calls, listening to the music and watching
movies or pictures from your phone, as well
using navigation from the Smart phone to the
screen of the car device.
Note:
You can't control your iPhone by the unit.
(iPhone mirrors display on screen)
4. Correctly connect USB wire.
5. Auto install APP.
For the rst connection with SmartLink,
if the Android phone is not installed with
interconnection APP, the Smartlink will ask
for installing the App to the Android phone.
6. Finish connection.
(If it is not connected successfully, please
replace USB cable or vehicle USB interface,
or re-insert USB wire or restart Android
phone and re-try).
7. After connection, operate according to
the screen software.
Tip:
• For your driving safety, please do not use
the function during driving.
• For normal use, Android 4.0 to Android 6.0
version is recommended. Since Android
2.3X and below version system lacks
relevant support, when using the version
system to connect the product, some
functions (such as: mobile video play, etc.)
may not display normally.
• According to the different mobile phone”
Media library” and “Video” program
support formats, it is not all the video les
copied to mobile phone can be identified
and played. According to the different
equipment function, not all video les of all
formats can be played in vehicle terminal
smoothly.
• Since the mobile phone data cable
performance difference in the market,
it is strongly recommended using the
original USB data line to connect so as to
guarantee the connection stability.
• Due to the difference of mobile phone
performance, when using different mobile
phones to connect, the performance may
be different.
Connect with Android phone
1. Select “Easyconnected Fun Full” in the
APPS menu and select “Android USB” on
the screen.
2. Start Android phone [USB debugging].
The operations of Android phone’s entering
[Setting] are as follows (since the Android
phone versions are not the same, it roughly
has two conditions):
1) Existence of [Developer options]: Click
[Additional settings]-Click [Developer
options]-click to open [Start developer
options]-click to open [USB debugging]-
determine to allow.
2) Inexistence of [Developer options]: Click
system version number (interior version
number) for 7 times, then back to setting
and click [Developer options]-click to open
“Start developer options”-click to open [USB
debugging]-determine to allow.
3. Bluetooth connection.
Scan for Bluetooth devices and select this
system for connection.

EN-18
SmartLink
Connect with iPhone
1. Select “Easyconnected Fun Full” in the
APPS menu and select “iPhone WiFi” on the
screen.
2. Turn on the WiFi and Personal Hotspot on
the settings menu of your iPhone.
3. Select the hotspot name of your iPhone on
the list of the screen and enter the password.
4. Open the control center of your iPhone and
touch [AirPlay].
5. Select [EC-Mirror], and turn on the
“Mirroring” function.
6. After connecting successfully, the desktop
of you iPhone will display on the screen of the
unit.
(If it is not connected successfully, please
restart the WiFi of your iPhone, and refresh
the hotspot list on the unit.
Select [EQ] on the menu to enter sound
setting mode.
Touch to select a preset EQ on upper side
of the screen from Flat, Pop, User, Rock,
Techno, Classic and Jazz.
[ ]: When listening to music at low
volumes, this featurewill selectively boost
certain bass and treble frequencies.
Touch [ ] to enter Fader/Balance/
Subwoofer setting menu.
Touch [ ] or [ ] to setup Balance, touch
[ ] or [ ] to setup Fader.
Sub Woofer
Sub woofer Level: Touch [ ] or [ ] to adjust
subwoofer Level.
Sound setting

EN-19
Internet
Wi-Fi Settings
1. Connect the WiFi dongle to the unit. Touch
the [ Settings ] icon on the main menu to
enter setting menu, and turn on Wi-Fi (if
necessary).
2. Touch [ ] to
enter WiFi setting menu.
3. Touch an available WiFi hotspot.
4. Touch [ Password ] and input the password,
touch [Connect] to conrm.
5. After successfully connected, the [ ]
icon appears on the top right corner of the
main menu . Now you can access internet.
Visit Website
To access the internet, you must setup
“wireless & network” in system settings menu.
Select [ ] on the main menu to view a
website.
Touch the dialog box on the upper side of
the screen to show keypad. Input the website
address, and touch [Go] to visit it. Drag the
web page to scroll.
E-mail
Select [Email] or other mail software on the
applications menu.
First you must setup an account, or sign into
an existing account. Enter your Email address
and password. Then you can send/receive
E-mails through the unit.