OEM M3097DE User manual

C150-E102-01EN
M3097DE
Image Scanner
OEM Manual

REVISION RECORD
Edition Date published Revised contents
01 Dec. 1997 First Edition
Specification No.: C150-E102-01EN
The contents of this manual is subject to change
without prior notice.
All Rights Reserved,
Copyright 1997 FUJITSU LIMITED

This page is intentionally left blank.

i
CONTENTS
Chapter 1 General.......................................................................................................... 1-1
1.1 General description..................................................................................................................... 1-1
1.2 Appearance and parts name......................................................................................................... 1-2
Chapter 2 Specifications and Functions......................................................................... 2-1
2.1 Basic specifications..................................................................................................................... 2-1
2.2 Option specifications................................................................................................................... 2-2
2.3 Reading limitation depending on the memory installed................................................................. 2-3
2.4 Physical Specifications.............................................................................................................. 2-4
2.5 Regulation conformity................................................................................................................. 2-5
2.6 Document specifications.............................................................................................................. 2-6
2.6.1 Paper size ............................................................................................................................ 2-6
2.6.2 Paper Conditions.................................................................................................................. 2-7
2.6.3 ADF capacity....................................................................................................................... 2-8
2.6.4 Areas that must not be perforated (for ADF reading only)...................................................... 2-9
2.6.5 Grounding color area................................................................................................................2-10
2.6.6 Job separation sheet.............................................................................................................2-11
Chapter 3 Image Functions ............................................................................................ 3-1
3.1 Overview of the image functions.................................................................................................. 3-1
3.2 Basic image functions.................................................................................................................. 3-3
3.2.1 Output resolution ................................................................................................................. 3-3
3.2.2 Main Window area............................................................................................................... 3-3
3.2.3 Binary reading ..................................................................................................................... 3-9
3.2.4 Halftone reading .................................................................................................................3-10
3.2.5 Grayscale reading................................................................................................................3-12
3.3 Optional image function.............................................................................................................3-12
3.3.1 DTC mode function (Auto I mode).......................................................................................3-12
3.3.2 IPC mode (Auto II mode).....................................................................................................3-20
3.3.3 Sub-Window .......................................................................................................................3-29
3.3.4 Zooming.............................................................................................................................3-30
3.3.5 Dither download..................................................................................................................3-30
3.3.6 Gamma download................................................................................................................3-30
Chapter 4 Storage and Installation ................................................................................ 4-1
4.1 Packaging box and storage condition............................................................................................ 4-1

ii
4.2 Components in the packaging box................................................................................................ 4-2
4.3 Installation procedure.................................................................................................................. 4-2
4.3.1 Removing the carrier fixing bracket ...................................................................................... 4-2
4.3.2 Connections ......................................................................................................................... 4-4
4.3.3 Mounting the stacker............................................................................................................ 4-4
Chapter5 Operation and Maintenance ..........................................................................5-1
5.1 Operator panel operation ............................................................................................................. 5-1
5.1.1 Operator panel function........................................................................................................ 5-1
5.1.2 Feed Mode setting ................................................................................................................ 5-2
Figure 5.2 Feed Mode setting............................................................................................................. 5-3
5.1.3 Manual Feed mode ............................................................................................................... 5-4
5.1.4 Setup mode .......................................................................................................................... 5-5
5.1.5 Function of CE mode............................................................................................................ 5-8
5.2 Document setting ........................................................................................................................ 5-9
5.2.1 Document setting on ADF paper chute .................................................................................. 5-9
5.2.2 Document setting on flatbed................................................................................................ 5-12
5.3 Cleaning................................................................................................................................... 5-13
5.4 Consumable .............................................................................................................................. 5-14
Chapter 6 Error display and Recovery...........................................................................6-1
6.1 Error display............................................................................................................................... 6-1
6.1.1 Temporary error................................................................................................................... 6-1
6.1.2 Alarm .................................................................................................................................. 6-1
6.2 Jam clearance.............................................................................................................................. 6-2
Appendix A Scanner Interface.......................................................................Appendix A-1
A.1 Control Interface.........................................................................................................Appendix A-1
A.1.1 Connection Specifications.....................................................................................Appendix A-1
A.1.2 Control Interface Signals ......................................................................................Appendix A-2
A.1.3 Driver/Receiver....................................................................................................Appendix A-3
A.1.4 Timing.................................................................................................................Appendix A-3
A.2 Video Interface............................................................................................................Appendix A-4
A.2.1 Video Interface Signals.........................................................................................Appendix A-4
A.2.2 Driver/Receiver....................................................................................................Appendix A-5
A.2.2.1 Driver/receiver for standard connector and M3096A21 connector.....................Appendix A-5
A.2.3 Data Transfer.......................................................................................................Appendix A-6
A.2.3.1 Transfer sequence ..........................................................................................Appendix A-6

iii
A.2.3.2 Effect in main scanning.................................................................................. Appendix A-8
A.2.3.3 Effect in subscanning................................................................................... Appendix A-11
A.2.4 Timing .............................................................................................................. Appendix A-14
A.3 Commands and Response .......................................................................................... Appendix A-16
A.3.1 Basic Command/Response Sequence ................................................................... Appendix A-16
A.3.2 Command/Response Format................................................................................ Appendix A-18
A.3.3 Command .......................................................................................................... Appendix A-19
A.3.3.1 CLEAR command........................................................................................ Appendix A-21
A.3.3.2 CONTROL command................................................................................... Appendix A-22
A.3.3.3 IMAGE CONTROL command...................................................................... Appendix A-41
A.3.3.4 SUBWINDOW CONTROL command ........................................................... Appendix A-51
A.3.3.5 START command ........................................................................................ Appendix A-67
A.3.3.6 READ command.......................................................................................... Appendix A-67
A.3.3.7 SENSE command......................................................................................... Appendix A-67
A.3.3.8 RETURN SENSE command ......................................................................... Appendix A-67
A.3.3.9 IMAGE MODE SENSE command ................................................................ Appendix A-68
A.3.3.10 SEND DITHER 1 command ......................................................................... Appendix A-68
A.3.3.11 SEND DITHER 2 command ......................................................................... Appendix A-70
A.3.3.12 INQUIRY command..................................................................................... Appendix A-73
A.3.3.13 INQUIRY2 command................................................................................... Appendix A-73
A.3.4 Response............................................................................................................ Appendix A-74
A.3.4.1 Ready.......................................................................................................... Appendix A-76
A.3.4.2 Normal status .............................................................................................. Appendix A-76
A.3.4.3 Image status................................................................................................. Appendix A-81
A.3.4.4 Unit status................................................................................................... Appendix A-84
A.3.4.5 Unit status 2 ................................................................................................ Appendix A-90
A.3.4.6 Read complete ............................................................................................. Appendix A-91
A.3.4.7 Operation error............................................................................................ Appendix A-96
A.3.4.8 Temporary error........................................................................................... Appendix A-97
A.3.4.9 Equipment error........................................................................................... Appendix A-98
A.3.5 Details Sequence................................................................................................ Appendix A-99
A.3.5.1 Initialization................................................................................................ Appendix A-99
A.3.5.2 Read operation............................................................................................Appendix A-100
A.3.6 Command/Response Correspondence .................................................................Appendix A-103
A.3.7 Command/Response Timing Chart.....................................................................Appendix A-104
A.4 Third Party Slot .......................................................................................................Appendix A-114
A.4.1 Control Interface...............................................................................................Appendix A-114
A.4.1.1 Connection specifications............................................................................Appendix A-114

iv
A.4.1.2 Control interface signals............................................................................. Appendix A-115
A.4.1.3 RTS and CTS control ................................................................................. Appendix A-116
A.4.1.4 Connection ................................................................................................ Appendix A-116
A.4.2 Video Interface................................................................................................. Appendix A-117
A.4.3 Data Transmission............................................................................................ Appendix A-118
A.4.4 Physical Specifications ..................................................................................... Appendix A-122
A.4.5 Logical Specification........................................................................................ Appendix A-125
Appendix B Interface deference between M3097DE and M3093DE..............Appendix B-1
B.1 Extended control register #0 ........................................................................................ Appendix B-1
B.2 Extended control register #2 ........................................................................................ Appendix B-1
B.3 Control register A#0.................................................................................................... Appendix B-2
B.4 Control register A#1.................................................................................................... Appendix B-3
B.5 Control register A#2.................................................................................................... Appendix B-3
B.6 Control register A#5.................................................................................................... Appendix B-4
B.7 Control register A#10 to A#17..................................................................................... Appendix B-4
B.8 Image control register A#1 .......................................................................................... Appendix B-5
B.9 Image control register A#4 .......................................................................................... Appendix B-5
B.10 Image control register A#5 and A#6............................................................................. Appendix B-6
B.11 Image control register A#7 and A#8............................................................................. Appendix B-6
B.12 Device information I.................................................................................................... Appendix B-7
B.13 Default of the device function information.................................................................... Appendix B-7
B.14 Device function information 2...................................................................................... Appendix B-8
Appendix C Throughput................................................................................Appendix C-1
C.1 Offline test..................................................................................................................Appendix C-1
C.2 Online test ..................................................................................................................Appendix C-1

1-1
Chapter 1 General
1.1 General description
M3097DE image scanner is an ideal input device for Electric filling systems, Facsimiles, optical
character readers (OCR), computer aided design (CAD) systems, and automatic publishing systems.
M3097DE is basically the scanner which have the duplex scanning feature with the basis of
M3097E+ and with the interface compatibility to M3097E+ and M3093DE. The features of the
scanner are focused on as follows.
(1) Duplex reading
This scanner can read duplex document with one scanning to reduce the scanning workload.
(2) Excellent paper-handling
This scanner can scan various kind of the document such as the size from A3 to A6.
(3) Fast reading
This scanner scans with the following scanning speed.
Simplex, A4, 200 dpi : 36 PPM (A4,200 dpi)
Duplex, A4, 200 dpi : 60 IPM (A4,200 dpi)
(4) High quality image
This scanner reads the documents with 400dpi basic resolution.
(5) Image processing
This scanner basically supports dither and error diffusion. Various image processing is available when
supported IPC option.
(6) New functions
Following functions are available for instance.
•Double feed detection
•Easy setting for some documents (IPC pre-setting function)
•Manual feed mode

General
1-2
1.2 Appearance and parts name
Appearance and parts name is shown in Figure. 1.1.
Figure 1.1 Part name of M3097DE

2-1
Chapter 2 Specifications and Functions
2.1 Basic specifications
Basic specifications of M3097DE are shown in Table 2.1.
Table 2.1 Basic Specifications of M3097DE
Item M3097DE Remarks
1 Operating method Flatbed and ADF
2 Image sensor CCD
3 Light source Xe Discharge tube (green)
Minimum A64 Documen
t size Maximum A3 or DL
5Basic resolution 400 dpi
6 Output resolution 100/150/200/240/300/400/600 dpi
7 Zooming of IPC option 50 to 800 dpi
See section 2.3
FB, A4,400 dpi 2.4 sec.
FB, A4,200 dpi 1.2 sec.
ADF, Simplex 36 PPM
8 Scanning
speed
ADF, Duplex 60 IPM
A4,200 dpi
9 Halftone patterns Dither / Error diffusion
10 Capacity of ADF 100 sheets A4,64g/m2
See section 2.6.3
11 Interface RS232C and Video
12 Video output Binary / Grayscale
13 Power requirements 100 to 120VAC, 50/60Hz
200 to 240VAC, 50/60Hz
14 Operating environment Temperature : 5°C to 35°C
Relative humidity : 20 to 80%
15 Basic memory 16 MB
IPC IPC-2D or IPC-3D*16 Option
Memory 16 MB See section 2.3
17 Scanner size 234H x 696W x 497D (mm)
18 Scanner weight 20 kg

Specifications and Functions
2-2
2.2 Option specifications
Following options are available for this scanner.
Table 2.2 Option of the scanner
Name Parts Number When the option required? Remarks
IPC-2D CA01952-0192
IPC-3D CA02919-0511 - When the image processing
of Section 3.3 required. Either IPC-2D or IPC-3D can be installed at a time.
Memory TBD - When duplex reading with
201dpi to 400dpi via third
party slot.
One memory option can be
installed per scanner.
16 Mbyte, 72 pin, EDO
SIMM 60 ns, non-parity
Figure 2.1 IPC-2D/3D option
Figure 2.2 Extended memory option
108
23.5

2.3 Reading limitation depending on the memory installed
2-3
2.3 Reading limitation depending on the memory installed
M3097DEhave the limitation of reading depending on the memory installed as shown in Table 2.3 and
2.4.
Table 2.3 The reading limitation of M3097DEwithout option
Binary Grayscale *2Output
resolution Simplex Duplex Simplex Duplex
100/150/200 dpi
300/400 dpi Supported (No additional memory) Supported *1
600 dpi Not supported *2 Not supported *2
*1 Setting itself may be rejected.
*2 Grayscale is supported by Third party slot
Table 2.4 The reading limitation of M3097DEat zooming of IPC-2D or IPC3D option
Binary Grayscale *3Zooming
Simplex Duplex Simplex Duplex
50 to 200 dpi
201 to 400 dpi Supported (No additional memory) Supported *1
401 to 600 dpi
601 to 800 dpi
Not supported *2 Not supported *2
*1 Memory option required, otherwise the possibility of Image transfer error exists.
*2 Setting itself may be rejected.
*3 Grayscale is supported by Third party slot

Specifications and Functions
2-4
2.4 Physical Specifications
Table 2.5 Physical specifications
No. Item M3097DE/DG
Height 234 ( 9.2 in.)
Width 696 ( 27.4 in.)
1Dimensions
(mm)
Depth 497 ( 19.6 in.)
2Weight (Kg) 20 ( 44.2 lb)
Voltage(VAC)100 to 120, 200 to 240 VAC ±10%
Phase Single
3Power
requirements
Frequency 50/60 Hz +2% -4%
4Power consumption (VA) 120
5Heat capacity 78 kcal ( 312 BTU/H)
6Surge current (A) 30
7Momentary power failure 100 % 0.5 Hz
8Leakage current (mA) 0.75 or less
9Dielectric strength AC 1.5 KV or more for one minute or
more(between FG and AC lines)
10 AC line noise Voltage 1.2 KV pulse duration 5 µs
Operating +5 to +3511 Temperature (°C)
Non operating -20 to +60
Operating 20 to 80 (No condensation)12 Relative humidity
(%) Non operating 8 to 95 (No condensation)
Operating 0.213 Vibration (G)
Non operating 0.4
Operating 514 Indication
(degree) Non operating 10
15 ESD (KV) 8 or more
Operating 53 or less (ISO DIS 9296)16 Acoustic noise
(dBA) Non operating 40 or less (ISO DIS 9296)

2.5 Regulation conformity
2-5
2.5 Regulation conformity
Table 2.6 Regulation conformity
Item Conformed regulation Regulation mark on the
scanner Remarks
UL 1950
CSA 22.2 950
Yes, CSA NRTL-C markSafety
EN60950 1992/A1:1993/A2:1993 Yes, GS mark by TUV
FCC Part15 Class A Yes
EN55022 1994 Class BEMI
EN50082-1 1992 Immunity
EN61000-3-2 1995 Harmonic emission
EMI
etc.
EN61000-3-3 1995
Yes, CE mark
Voltage variation

Specifications and Functions
2-6
2.6 Document specifications
When using the flatbed, any condition of the paper can be read except paper size and ground color
specification.
2.6.1 Paper size
A
B
↑
Feeding direction
(Unit : mm)
Maximum Minimum
ABAB
148 105297 432
105 148
Figure 2.3Paper size
Paper size conversion table
Category Dimensions Category Dimensions
Letter 8.5 x 11 in (216 x 279 mm) A3 11.7 x 16.54 in (297 x 420 mm)
Legal 8.5 x 14 in (216 x 356 mm) A4 8.3 x 11.7 in (210 x 297 mm)
Ledger 11 x 17 in (279 x 432 mm) A5 5.83 x 11.7 in (148 x 210 mm)
Executive 7.25 x 10.5 in (184 x 267 mm) B4 10.1 x 14.3 in (257 x 364 mm)
B5 7.2 x 10.1 in (183 x 257 mm)

2.6 Document specifications
2-7
2.6.2 Paper Conditions
1) Paper type
•Woodfree paper
•PPC paper, Specified by XEROX Corporation
When using another paper, check that it is successfully fed by ADF before
performing a scanning operation.
2) Paper weight
13.9 lbs (52g/m2 ) to 27.8 lbs (104g/m2)
3) Items to avoid
•The following documents may be hard to read by ADF.
Before you start the large quantity reading, check that the document is read appropriately. If the
ADF reading is not appropriate, read them by flatbed.
- Paper with a clip or staple
- Paper that has ink which is not dry.
- Paper thickness is not constant, such as an envelope.
- Paper that has large rumples or curl. (See Note 3)
- Paper that has folds or tears.
- Tracing paper
- Coating paper
- Carbon paper.
- Paper size that is out of standard.
- Items other than paper, such as clothes, metal sheet, or OHP film.
- Photographic paper
- Paper that has notches on its side.
- Paper that has a shape other than square.
- Paper that is very thin.
Note 1:
The important document which shall not be torn must be read by flatbed.
Note 2:
Carbon-less papers have the chemical composition which damages the pad and pick roller. Therefore,
note the following remarks
Cleaning: If the miss pick occurs frequently, clean the pad and pick roller in accordance with the
Operator’s guide.

Specifications and Functions
2-8
Replacement of parts: The life of the pad and the pick roller may be shorter than the case that PPC
document is fed.
Replacement cycle of the pad and the pick roller may be around 100,000 sheets depending on the paper
quality and cleaning cycle.
Note 3:
Paper should be straightened to fit the condition below.
2.6.3 ADF capacity
The number of pages that can be loaded into ADF chute depends on the paper size and ream
weight. This information is shown in the following Figure:
Figure 2.4ADF capacity
Paper weight conversion table
Country Unit Conversion
Japan Kg/ream 45 55 64.6 77.5 90 109.8 135
USA lb 13.9 17 20 24 27.9 34 41.8
Europe g/m252 64 75 90 104 127 157
52 64 81 104 127
g/m2

2.6 Document specifications
2-9
2.6.4 Areas that must not be perforated (for ADF reading only)
Perforations in the shaded areas may cause Jam error. If you must read data from such paper, use the
flatbed
Figure 2.5 Areas that must not be perforated

Specifications and Functions
2-10
2.6.5 Grounding color area
The color of the shaded area shown in Figure 2.6should be paper grounding color (white) or drop-out
color. If not, set White level following OFF (Photograph) before reading.
(See A.3.3.2 CONTROL command/Control register A#1/B#1)
Figure 2.6 Grounding color area