Office Boffins ORACL001 User manual

PLEASE NOTE:
The screws are pre-inserted into their correct holes to prevent them from being
lost in transit. Please remove them before assembly using the allen key provided.
ORACL001
B-5PCS
A-1PC
F-8PCS
D-1PC
ASSEMBLY
INSTRUCTIONS
C-4PCS
PRE-INSERTED
22 mm
E-8PCS
PRE-INSERTED
18 mm
G-1PC

2
Do not tighten bolts fully until you have completed assembly.
DO NOT USE A POWER DRILL TO TIGHTEN THE SCREWS.
TIGHTEN BY HAND WITH THE ALLEN KEY PROVIDED.
DONOTSTANDONTHISCHAIR.
DONOTUSETHISCHAIRASASTEPLADDER.
USETHISPRODUCTFORSEATINGONEPERSONATATIMEONLY.
DONOTUSETHISCHAIRUNLESSALLBOLTS,SCREWSANDKNOBSAREFIRMLYSECURED.
ATLEASTEVERY6MONTHS,CHECKALLBOLTS,SCREWSANDKNOBSTOBESURETHEYARETIGHT.
IFPARTSAREMISSING,BROKEN,DAMAGEDORWORN,STOPUSINGTHISPRODUCTUNTILREPAIRSAREMADEUSINGFACTORYAUTHORISEDPARTS.
FAILURETOFOLLOWTHESEWARNINGSCOULDRESULTINSERIOUSINJURY.
WARNING
1
3
5 6
4
2
E×2
C×4
A
B×5
D
E×2
E×1
E×1
E×1 E×1
F×4
F×4
Loosely aach the arms to the seat using 2 x screw E for each arm
with the Allen Key provided – DO NOT TIGHTEN UNTIL THE CHAIR IS
ASSEMBLED AS INSTRUCTED IN IMAGE “5”.
Place the seat onto the assembled base as shown in the image.
Front
Now put the back into place and aach to the arms using 2 x screw E for each arm - DO NOT
TIGHTEN UNTIL THE CHAIR IS ASSEMBLED AS BELOW IMAGE.
Please insert the screw covers F.

3
23
1
＋
－
-
+
1 2 3