Office Boffins ULT4001 User manual

PLEASE NOTE:
The screws are pre-inserted into their correct
holes to prevent them from being lost in transit.
Please remove them before assembly using the
allen key provided.
ULT4001
ASSEMBLY
INSTRUCTIONS
B-5PCS
A-1PC
C-1PC
G-6PCS
(45mm)
PRE-INSERTED
E-1PC
Spanner
F-1PC
D-1PC
Transit nut

DONOTSTANDONTHISCHAIR.
DONOTUSETHISCHAIRASASTEPLADDER.
USETHISPRODUCTFORSEATINGONEPERSONATATIMEONLY.
DONOTUSETHISCHAIRUNLESSALLBOLTS,SCREWSANDKNOBS
ATLEASTEVERY6MONTHS,CHECKALLBOLTS,SCREWSANDKNOBS
IFPARTSAREMISSING,BROKEN,DAMAGEDORWORN,STOPUSINGTHIS
FAILURETOFOLLOWTHESEWARNINGSCOULDRESULTINSERIOUSINJURY.
WARNING
AREFIRMLYSECURED.
TOBESURETHEYARETIGHT.
PRODUCTUNTILREPAIRSAREMADEUSINGFACTORYAUTHORISEDPARTS.
Do not tighten bolts fully until you have completed assembly.
DO NOT USE A POWER DRILL TO TIGHTEN THE SCREWS.
TIGHTEN BY HAND WITH THE ALLEN KEY PROVIDED.
1
34
5
7
6
2
A
B
C
G*2
G*2
G*2
R
L
FRONT
D
E
Transit nut
F
Remove the transit nut “D” using the spanner “E”. Attach the back adjustment handle “F”.