OfficeSource OSF9500 User manual

®
®www.ocesourcefurniture.com
OSF9500
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
MODEL: OSF9500
Thank you for purchasing the Desk Mount Power from OfficeSource.
Before assembly, please remove all parts from the carton and verify that you have correct quantities.
A1
B1 set
C1
D1 set
E1 set
F1 set
Clamp mount installation Cell phone holder installation
Insert one mount &
touch the le edge,
turn the knob
counter-clockwise to
secure the unit.

®
®www.ocesourcefurniture.com
PL1007
ASSEMBLY INSTRUCTIONS
ATTENTION
●Indoor use only
●Interconnecting more than 4 units together is not recommended.
●Do not exceed 1440W total, for all connected units.
●Do not open or dismantle the power box unit. High voltage inside could result in
serious electrical shock.
Grommet mount installation Underneath mount installation
Single Unit connection
Daisy Chain connection
Insert the bracket into A
Insert the screw into the
slot of the bracket and turn
the knob counter-clockwise
to secure the bracket.
Turn the nut counter-
clockwise unl the metal
plate touches the boom of
the desk surface, and then
ghten the nut.
A
F
Use bracket F to
mount the power
box under the
table.
Install one side
bracket rst.
And then the
other side.