Okina LPC Series User manual

Copyright © 2009. All Rights Reserved. SSMI36-600LP922_L-816
http://www.okinausa.com REV12072010
SSMI36-600LP922
SSMI36-600LP922P
License Plate Capture Series
36 IR LED License Plate Monochrome Camera
z1/3” Sony CCD
z600 TV Lines
z36 Super Power IR LED
z9.0mm~22.0mm Vari-Focal IR Corrected Lens
zIR Distance up to 50ft / 15m
z0 Lux @ IR “on”
zDie-cast Aluminum Housing
zIP66 Rating
zDual Power 12V DC / 24V AC
FEATURES
Please read the Operational Manual
before attempting to use this product.
DIMEN
S
I
O
N
S
MANUAL
P = PAL Version

Copyright © 2009. All Rights Reserved. SSMI36-600LP922_L-816
http://www.okinausa.com REV12072010
PIC L-816
Model SSMI36-600LP922 SSMI36-600LP922P
TV System NTSC PAL
Image Sensor 1/3” Sony CCD
DSP Sony
Resolution 600 TV Lines
Total Pixels 768(H) x 494(V) 752(H) x 582(V)
Video Output 1.0Vp-p Composite / 75ohms
Minimum Illumination 0 Lux @ IR “on”
Scan System 2:1 Interlace
V: 59.9Hz ; H: 15.734KHz 2:1 Interlace V: 50Hz ; H: 15.625KHz
Synchronization Internal
Lens 9.0mm~22.0mm Vari-Focal IR Corrected Lens
F1.4 DC Iris
View Angle Horizontal: 32.1° (wide) ~ 13.1° (tele)
Vertical: 23.3° (wide) ~ 9.8° (tele)
Zoom & Focus External Adjustments
IR LED 36pcs Super Power
IR Wavelength 850nm
IR Distance 50ft / 15m
Capture Range 10~27ft / 3~8m
LED Life More than 10,000 hours
S/N Ratio More than 50dB (AGC OFF)
Gamma 0.45
Back Light Compensation Auto (Center Weighting)
Construction Die-cast Aluminum Housing w/ Tempered Glass
IP Rating IP66, Vandal Resistant
Power Supply 12V DC / 24V AC
Power
Consumption 10 W (max)
Operation Temperature 14°F ~ 122°F / -10oC ~ +50oC
Storage Humidity 30~90% RH
Storage Temperature -4oF ~ 140oF / -20oC ~ +60oC
Dimension 3.23”(Ø) x 8.07”(H) / 82mm(Ø) x 205mm(H)
Weight 1.35 lbs / 610g
*Specifications are subject to change without notice
zOne (1) SSMI36-600LP922/ SSMI36-600LP922P Camera
zOne (1) Manual
*For any returns, please include all components listed above with original packaging in Resalable Condition. Absolutely No
Returns will be accepted if any component is missing/damaged or if any cable is cut or tampered with.
SPECIFICATIONS
PA
C
KA
G
E
CO
NTENT
S

Copyright © 2009. All Rights Reserved. SSMI36-600LP922_L-816
http://www.okinausa.com REV12072010
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to strong light as this may damage the pick-up device.
2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling could damage the camera.
3. Requires a proper operating environment
This camera is designed for outdoor or indoor use. The allowable temperature range for operation of this camera is between 14°F
~ 122°F / -10°C ~ 50°C and the allowable humidity is 85%RH maximum.
4. Clean the front face or lens
It is recommended that the lens be cleaned every 3~6 months. Cleaning should be done by using a chamois, a very fine soft cloth,
lens tissue, or cotton tipped applicator and rubbing alcohol to carefully remove any fingerprint or dust.
5. Check the power source voltage
The power source voltage should be within the specified range. (Camera must meet the specifications). Camera must be
connected to a surge protector at all times.
6. Objects and liquid entry
Never push objects of any kind into this camera as this may touch dangerous voltage points of short out parts that could result in
a fire or electric shock. Never spill any kind of liquid on the video product.
7. Servicing
Do not attempt to service this video product by yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all service to qualified servicing personnel.
8. Damage requiring service
Unplug this video product from the wall outlet and refer service to qualified servicing personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been dropped or the cabinet has been damaged.
d. When the video product exhibits a distinct change in performance.
OKINA USA products are covered under warranty for one year from the date of purchase. The warranty will automatically be voided
if any of the following occurs:
1. Camera sticker is removed
If the camera sticker is removed, we will not be able to confirm any information regarding when and where the product was
purchased. We have no other way to verify the purchase record without the serial number on the camera sticker; therefore, it
should not be removed.
2.
Camera is modified in any way
If the camera is scratched, damaged, or modified in a manner not described in this manual, the warranty will be voided
immediately. It is the customer’s responsibility to keep the camera in good condition.
3. Video or power cable is cut
The video cable and the power cable should not be tampered with. Cutting or modifying of the cables will result in termination of
the warranty.
CAUTION
WARRANTY