Olfer SR-2400LC User manual

DALI Master
Feature
Standard DALI Master , SR-2400LC control 4 DALI Addresses, SR-2400GC control 4 groups, SR-2400SC
control 4 scenes.
(SR-2400LC, SR-2400GC,SR-2400SC)
Parameter
Part No. Operation Voltage Output
SR-2400LC Provided by DALI bus 52x52x22.9
DALI Signal
Dimensions
SR-2400GC Provided by DALI bus 52x52x22.9DALI Signal
SR-2400SC Provided by DALI bus 52x52x22.9
DALI Signal
Wiring diagram
Comply to DALI standard protocol IEC60929 and in compliance with DALI products from other international
incorporation.
With bus detective function, one channel DALI bus can install multiple dimming controllers.
No external power supply which is provided by DALI bus. Consumption current is 4mA.
Enable to select different single light address, group address for controlling by encoding switch.
Up to 4 single light addresses or 4 group addresses for switch and dimming control.
Controlled by external switch, convenient and flexible, with small size, it can be easily placed into 86 X 86 mm
box.
SR-2400LC SR-2400GC SR-2400SC
Product Size
D1 D1 D2 D2
K4GND K1K2
K3
012
3
4
5
6
7
89
012
3
4
5
6
7
89
(x10)
(x1)
Brief introduction of buttons
For DALI Dimmable led Drivers and dali master
For four Buttons Dimmer
Starting Number
(Setting the starting DALI Address(SR-2400LC),
the starting Group Number,(SR-2400GC),
the starting Scene Number(SR-2400SC))
1x(1~9)
10x(1~9)
D1 D1 D2 D2
K4GND K1K2
K3
012
3
4
5
6
7
89
012
3
4
5
6
7
89
(x10)
(x1)
K1K2K3K4
DALI bus
123
4
GND
Power Supply
12-36VDC
LN
110V-230VAC
123
4
GND
SR-2303B
RGB or single color LED strip
DALI Master
Set starting number for DALI masters
Set the starting number “X” on SR-2400LC(with 64 dali address)
K1 control X dali address ,
K2 control X+1 dali adrees ,
K3 control X+2 DALi address ,
K4 control X+3 DALi Address
Operation
52.0
52.0
22.9

Safety & Warnings
Warranty Agreement
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
7) For update information please consult your supplier.
Please ensure that the cable is secured tightly in the connector
1) We provide lifelong technical assistance with this product:
3-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 3-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Set the starting number “X” on SR-2400GC (with 16groups)
K1 control X group ,
K2 control X+1 group ,
K3 control X+2 group ,
K4 control X+3 group
Set the starting number on SR-2400SC (with 16 scenes)
K1 control X scene ,
K2 control X+1 scene,
K3 control X+2 scene ,
K4 control X+3 scene
Note:
1.keep the starting number on the DALI Master with the same first dali address on dali dimmers, same first
group number , same first scene number the compute Programmed..
2. The groups and scenes need to be programmed on computer, then can work with our SR-2400GC SR-
2400SC.