Olympus Infinity Zoom 210 User manual

INSTRUCTIONS

Tableofcontents
Description of controls ............................................. 3
Before you begin
Loading the batteries............................................. 6
Checking the batteries ........................................... 7
Attaching the strap ................................................ 8
Loading the film .................................................... 9
Unloading the film ............................................... 12
Simple point & shoot photography
How to take pictures ............................................ 14
Autoflash photography
(1)Taking pictures in low light ............................20
(2)Taking backlit subjects ....................................23
Advanced shooting techniques
Macro photography .............................................. 24
Focus lock ............................................................ 25
Selftimer............................................................... 28
Continuous mode ................................................. 30
Auto-zoom mode.................................................. 31
Pre-focus mode ....................................................33
AUTO-S flash photography .................................35
Flash OFF............................................................. 37
FILL-IN flash ....................................................... 38
MULTI flash ........................................................ 39
Night scene flash photography ............................41
How to use the soft case (optional) ...........................43
Care and storage ........................................................44
Questions and answers............................................... 46
Specifications............................................................. 47
1

Thank you for purchasing the OLYMPUS Infinity Zoom 210. Please read this instruction manual carefully before
using the camera. This camera will not operate unless the batteries are loaded and the power switch is set to ON.
Before taking important pictures, it is recommended that you shoot a roll of film just to familiarize yourself with the
camera's features.
Symbols used in this manual
Correct
Incorrect
Operation Order
Operation order
Automatic operation
Attention
Operation sound Lamp on Lamp blinking
Press lightly
2

Description of controls
LCD panel
Light sensor
Viewfinder
Shutter release button
Autofocus windows
Steady grip
Power switch
Selftimerindicator
Subject button
Flash mode button
Flash reflector
Lens
Strap eyelet
Zoom buttons
3

Back cover Viewfinder
Battery compartment cover
Film window
Tripod socket
Back cover release
Rewind button
4

Viewfinder display LCD panel
Close-up
correction marks
Autofocus frame
AF indicator (green)
Flash indicator (orange)
Selftimer
Continuous mode
Auto-zoom
Pre-focus
Battery check
indicator
Exposure counter
Flash mode selection indicator
Flash mode indicator
5

Before you
begin···
Loading the
batteries
Insert a coin into the groove of the
battery cover on the side of the grip
and open the cover.
Insert two 3V lithium batteries as
shown and replace the cover.
Use Panasonic CR123A, Duracell
DL123A, or equivalent.
* Do not mix different types of batteries or
new and old batteries at the same time.
* Remove batteries if you do not plan to use
the camera for an extended period of time
(more than a year).
6

Set the power switch to ON to check
the batteries. The battery check
indicator will be displayed for 12
seconds.
When " " is displayed, batteries are
OK.
If " " flashes, batteries are low,
have spares handy.
If " " is displayed continuously,
batteries should be replaced
immediately.
* When the battery power is low, the
flash will take longer to recharge.
* Before replacing the batteries, set
the power switch to OFF.
Checking the
batteries
7

Attaching the
strap
8

Insert the film cartridge into the
camera. Always avoid direct sunlight
when loading the film.
Open the back cover by sliding the
back cover release toward the top of
the camera.
Loading the film
This camera is designed to
use DX-coded 35mm film,
DX coding, used by
virtually all major film
manufacturers, allows the
camera to identify and set
the film speed automati-
cally. If DX-coded film is
unavailable, use ISO 100
film.
9