Olympus IR 300 - Digital Camera - 5.0 Megapixel Installation guide

ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCH
Basic
Manual
DIGITAL CAMERA
IR-300
2
28
54
80
d4243_e_basic_01_cover_oe_7.fm Page 1 Friday, January 28, 2005 6:51 PM

2
En
For customers in North and South America
For customers in Europe
Trademarks
• IBM is a registered trademark of International Business Machines Corporation.
• Microsoft and Windows are registered trademarks of Microsoft Corporation.
• Macintosh is a trademark of Apple Computer Inc.
• xD-Picture Card™ is a trademark.
• All other company and product names are registered trademarks and/or
trademarks of their respective owners.
• The standards for camera file systems referred to in this manual are the “Design
Rule for Camera File System/DCF” standards stipulated by the Japan
Electronics and Information Technology Industries Association (JEITA).
“CE” mark indicates that this product complies with the European requirements
for safety, health, environment and customer protection. “CE” mark cameras
are intended for sales in Europe.
• Thank you for purchasing an Olympus digital camera. Before you start to use your
new camera, please read these instructions carefully to enjoy optimum performance
and a longer service life.
• This manual explains shooting and playback basics. For details on functions, read the
advanced manual. Keep this manual in a safe place for future reference.
• We recommend that you take test shots to get accustomed to your camera before
taking important photographs.
• The screen and camera illustrations shown in this manual were produced during the
development stages and may differ from the actual product.
For customers in USA
Declaration of Conformity
Model Number : IR-300
Trade Name : OLYMPUS
Responsible Party :
Address : Two Corporate Center Drive, P.O. Box 9058, Melville, NY
11747-9058 U.S.A.
Telephone Number : 1-631-844-5000
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
For customers in Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
d4243_basic_e_00_bookfile_7.book Page 2 Thursday, January 27, 2005 3:37 PM

3
En
Manual Contents
The camera’s capabilities ............................................ 4
icapabilities ......................................... 5
Safety Precautions....................................................... 6
UNPACKING THE BOX CONTENTS...................13
LOADING THE BATTERY ...............................15
CHARGING THE BATTERY .............................17
TURNING THE CAMERA ON ...........................18
TAKING A PICTURE......................................20
REVIEWING A PICTURE ................................22
TURNING THE CAMERA OFF ..........................23
Installing OLYMPUS Master Software ...................... 24
Specifications ............................................................. 25
d4243_basic_e_00_bookfile_7.book Page 3 Thursday, January 27, 2005 3:37 PM

4
En
The camera’s capabilities
SEL. ALBUM
GO CANCEL SELECT
REGISTERED:10
Take pictures Organize pictures
Convenient features
Edit pictures
Print pictures
Use with a computer
Display pictures
Choose from 17 different scene
modes and then take pictures with a
simple press of the shutter button.
With the image stabilizer function,
you can record beautiful movies with
sound.
You can organize your pictures in a
calendar display. The album
function is also great for organizing
your pictures.
Be creative and edit your
pictures. You can add frames
or titles to your pictures
directly on the camera and
easily create postcards.
Using the OLYMPUS Master
software on your computer, you can
enjoy editing, viewing, and printing
pictures downloaded from your
camera.
Set your camera on the cradle and
use the different slideshow options
to display your pictures. You can
even connect the cradle directly to
a TV to display pictures for your
friends and family.
With a PictBridge-compatible
printer, you can print pictures
directly from your camera.
This camera comes with a voice
recording function that allows you to
select the sound quality. This can be
used to record voice memos.
d4243_basic_e_00_bookfile_7.book Page 4 Thursday, January 27, 2005 3:37 PM

5
En
icapabilities
print reserved pictures easily
with the press of a button
You can easily print pictures with
print reservations. The same
function can also be used with
PictBridge-compatible printers.
About Dock&Done
This system was developed to simplify digital camera operations by allowing you
to set your camera in the cradle and easily store or print your pictures without the
use of a computer.
With Dock&Done-compatible products, you can more easily take, view, store,
search for, display, print and share pictures.
Use a iprinter to
create a DVD or CD of
your pictures
You can dock your camera
on a Dock&Done DVD
storage unit and copy your
camera pictures to a DVD
or CD. You can perform all
the operations, from
formatting the disk to
copying the pictures, with
the menus on your camera.
store new pictures
automatically
Just set up the Dock&Done
system to store newly
taken pictures
automatically in the
storage unit (hard disk/
DVD). You can playback
pictures from the storage
unit (hard disk/DVD) on the
camera’s monitor.
store and print newly taken
pictures automatically
Just set up the Dock&Done system to store
newly taken pictures automatically in the
storage unit (hard disk/DVD), before printing
them. You can print pictures stored in the
storage unit (hard disk/DVD) while viewing
them on the camera’s monitor.
Use a istorage unit (hard disk/DVD)* with a
iprinter to
* The Hard disk storage unit (S-HD-100) needs to support the playback function. If
not, you need to upgrade the firmware. For details, visit a homepage listed below.
North and South America: http://www.olympusamerica.com/IR500_storage
Europe: http://www.olympus-europa.com/site/ir-500-storage
Other areas: Contact the customer support center.
Use a istorage unit (hard disk/DVD)* to
d4243_basic_e_00_bookfile_7.book Page 5 Thursday, January 27, 2005 3:37 PM

6
En
Safety Precautions
Read All Instructions — Before you use the product, read all operating
instructions.
Save These Instructions — Save all safety and operating instructions for future
reference.
Heed Warnings — Read carefully and follow all warning labels on the product and
those described in the instructions.
Follow Instructions — Follow all instructions provided with this product.
Cleaning — Always unplug this product from the wall outlet before cleaning. Use
only a damp cloth for cleaning. Never use any type of liquid or aerosol cleaner,
or any type of organic solvent to clean this product.
Attachments — For your safety, and to avoid damaging the product, use only
accessories recommended by Olympus.
Water and Moisture — Never use this product around water (near a bathtub,
kitchen sink, laundry tub, wet basement, swimming pool or in the rain). For
precautions on products with weatherproof designs, read the weatherproofing
sections of their manuals.
General Precautions
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL.
Lightning flash with an arrowhead, enclosed in a triangle, alerts you to the presence of uninsulated voltage
points inside the product which could cause a serious electrical shock.
An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in
the documentation provided with the product.
WARNING!
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER EXPOSE THIS PRODUCT TO WATER OR
OPERATE IN A HIGH HUMIDITY ENVIRONMENT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
d4243_basic_e_00_bookfile_7.book Page 6 Thursday, January 27, 2005 3:37 PM

Safety Precautions
7
En
Location — To avoid damage to the product and prevent personal injury, never
place this product on an unstable stand, tripod, bracket, table or cart. Mount
only on a stable tripod, stand, or bracket. Follow the instructions that describe
how to safely mount the product, and use only the mounting devices
recommended by the manufacturer.
Power Sources — Connect this product only to the power source described on
the product label. If you are not sure about the type of power supply in your
home, consult your local power company. Refer to your operating instructions
for information on using the product with a battery.
Grounding, Polarization — If this product can be used with a specified AC
adapter, the adapter may be equipped with a polarized alternating current line
plug (a plug with one blade wider than the other). This safety feature allows the
plug to fit into the power outlet only one way. If you cannot insert the plug into
the wall outlet, pull it out, reverse it, and then reinsert it. If the plug still fails to
fit, contact an electrician and have the receptacle replaced.
Protecting the Power Cord — The power supply cord should be placed so it will
not be walked on. Never put a heavy object on the power cord or wrap it around
the leg of a table or chair. Keep the area around the power cord connection
points, at the power outlet, and at the product connection, free of all AC adapter
or accessory power cords.
Lightning — If a lightning storm occurs while using a specified AC adapter,
remove it from the wall outlet immediately. To avoid damage from unexpected
power surges, always unplug the AC adapter from the power outlet and
disconnect it from the camera when the camera is not in use.
Overloading — Never overload wall outlets, extension cords, power strips, or
other power connection points with too many plugs.
Foreign Objects, Liquid Spillage — To avoid personal injury caused by fire or
electrical shock from contact with internal high voltage points, never insert a
metal object into the product. Avoid using the product where there is a danger
of spillage.
Heat — Never use or store this product near any heat source such as a radiator,
heat register, stove, or any type of equipment or appliance that generates heat,
including stereo amplifiers.
Servicing — Refer all servicing to qualified personnel. Attempting to remove the
covers or disassemble the product, could expose you to dangerous high
voltage points.
d4243_basic_e_00_bookfile_7.book Page 7 Thursday, January 27, 2005 3:37 PM

Safety Precautions
8
En
Damage Requiring Service — If you notice any of the conditions described below
while using a specified AC adapter, unplug it from the wall outlet and refer
servicing to qualified service personnel:
a) Liquid has been spilled onto the product or some other object has fallen into
the product.
b) The product has been exposed to water.
c) The product does not operate normally despite following operating
instructions. Adjust only the controls described in the operating instructions
as improper adjustment of other controls could damage the product and
require extensive repair work by a qualified technician.
d) The product has been dropped or damaged in any way.
e) The product exhibits a distinct change in performance.
Replacement Parts — When replacement parts are required, make sure that the
service center uses only parts with the same characteristics as the originals, as
recommended by the manufacturer. Unauthorized substitution of parts could
result in fire, electrical shock, or create other hazards.
Safety Check — Upon completion of servicing or repairs, ask the service
technician to perform safety checks to determine that the product is in good
working order.
WARNING
(Do not use the camera near flammable or explosive gases.
• To avoid causing a fire or explosion, never use the camera near flammable
or explosive gases.
(Do not use the flash on people (infants, small children, etc.) at
close range.
• Use caution when taking flash pictures at close range. When you fire the
flash, you must be at least 1 m (3 ft.) away from the faces of your subjects,
especially when taking pictures of infants and small children. Firing the flash
too close to the subject’s eyes could cause a momentary loss of vision.
DANGER
If the product is used without observing the information given under this
symbol, serious injury or death may result.
WARNING
If the product is used without observing the information given under this
symbol, injury or death may result.
CAUTION
If the product is used without observing the information given under this
symbol, minor personal injury, damage to the equipment, or the loss of
valuable data may result.
Handling the Camera
d4243_basic_e_00_bookfile_7.book Page 8 Thursday, January 27, 2005 3:37 PM

Safety Precautions
9
En
(Keep young children and infants away from the camera.
• Always use and store the camera out of the reach of young children and
infants to prevent the following dangerous situations which could cause
serious injury:
• Becoming entangled in the camera strap, causing strangulation.
• Accidentally swallowing the battery or other small parts.
• Accidentally firing the flash into their own eyes or those of another child.
• Accidentally being injured by the moving parts of the camera.
(Do not look at the sun or strong lights through the camera.
• To avoid damaging your eyes, never aim the camera directly into the sun,
or any other extremely bright light source.
(Do not touch the camera or AC adapter until charging is finished
and the battery has cooled.
• The camera and AC adapter become hot while charging. If you touch them
for too long, you may suffer minor burns.
(Do not use or store the camera in dusty or humid places.
• Using or storing the camera in dusty or humid places may result in a fire or
electric shock.
(Do not cover the flash with a hand while firing.
• Do not cover the flash with a hand while firing or touch it after it has just been
fired. It may be hot and cause minor burns. Avoid using the flash for
extended periods.
(Do not take apart or modify the camera.
• Never attempt to disassemble the camera. The internal circuits contain high
voltage points which could cause serious burns or electrical shock.
(Do not let water or foreign objects inside the camera.
• If the camera is accidentally dropped in water, or if liquid is spilled into the
camera, stop using it, allow it to dry, and then remove the battery. Contact
the nearest authorized Olympus service center.
CAUTION
(Stop using the camera immediately if you notice any unusual
odors, noise, or smoke around it.
• If you notice any unusual odors, noise, or smoke around the camera during
operation, switch it off immediately – and disconnect a specified AC adapter
(if attached). Allow the camera to sit idle for a few minutes to cool. Take the
camera outdoors, away from flammable objects, and carefully remove the
battery. Never remove the battery with bare hands, which may cause a fire
or burn your hands. Contact the nearest Olympus service center
immediately.
d4243_basic_e_00_bookfile_7.book Page 9 Thursday, January 27, 2005 3:37 PM

Safety Precautions
10
En
(Do not use the camera with wet hands.
• To avoid dangerous electrical shock, never hold or operate the camera with
wet hands.
(Do not leave the camera in places where it may be subject to
extremely high temperatures.
• Doing so may cause parts to deteriorate and, in some circumstances, cause
the camera to catch fire.
(Handle the camera with care to avoid getting a low-temperature
burn.
• When the camera contains metal parts, overheating can result in a low-
temperature burn. Pay attention to the following:
• When used for a long period, the camera will get hot. If you hold on to the
camera in this state, a low-temperature burn may be caused.
• In places subject to extremely cold temperatures, the temperature of the
camera’s body may be lower than the environmental temperature. If
possible, wear gloves when handling the camera in cold temperatures.
(Be careful with the strap.
• Be careful with the strap when you carry the camera. It could easily catch
on stray objects – and cause serious damage.
(Use only the AC adapter specified by Olympus.
• Never use any AC adapter except one specified by Olympus. Using a
different AC adapter may damage the camera or power source, or result in
accidents or fire. Ensure the adapter used is designed for your region or
country. For more information, contact the nearest Olympus service center
or the store of purchase. Olympus makes no representations or warranties
regarding any damages caused by AC adapters not recommended by
Olympus.
d4243_basic_e_00_bookfile_7.book Page 10 Thursday, January 27, 2005 3:37 PM

Safety Precautions
11
En
DANGER
• Never heat or incinerate batteries.
• Do not connect the (+) and (-) terminals to each other using metal objects.
• Take precautions when carrying or storing batteries to prevent them from
coming into contact with any metal objects such as jewelry, pins, fasteners, etc.
• Never store the battery where it will be exposed to direct sunlight, or is subjected
to high temperatures in a hot vehicle, near a heat source, etc.
• To prevent causing battery leaks or damaging their terminals, carefully follow all
instructions regarding the use of batteries. Never attempt to disassemble a
battery or modify it in any way, by soldering, etc.
• Never attempt to connect a battery directly to a power outlet, or to a cigarette
lighter in a vehicle.
• If battery fluid gets into your eyes, flush your eyes immediately with clear, cold
running water and seek medical attention immediately.
• Always store the battery out of the reach of small children. If a child accidentally
swallows a battery, seek medical attention immediately.
WARNING
• Keep the battery dry at all times. Never allow them to come into contact with
fresh or salt water.
• Do not touch or hold the battery with wet hands.
• To prevent batteries from leaking, overheating, or causing a fire or explosion,
use only batteries recommended for this product.
• If the battery is not charged within the specified time, stop charging it and do not
use it.
• Do not use a battery if it is cracked or broken.
• If a battery leaks, becomes discolored or deformed, or becomes abnormal in
any other way during operation, stop using the camera and consult your dealer
or an authorized Olympus service center. Continued use may result in fire or
electric shock.
• If a battery leaks fluid onto your clothing or skin, remove the clothing and flush
the affected area with clean, running cold water immediately. If the fluid burns
your skin, seek medical attention immediately.
• Never attempt to modify the battery compartment on the camera, never insert
anything (other than the recommended battery) into the battery compartment.
• Never subject the battery to strong shocks or continuous vibration.
Battery handling precautions
Follow these important guidelines to prevent the battery from leaking,
overheating, burning, exploding, or causing electrical shocks or burns.
d4243_basic_e_00_bookfile_7.book Page 11 Thursday, January 27, 2005 3:37 PM

Safety Precautions
12
En
CAUTION
• Before loading, always inspect the battery carefully for leaks, discoloration,
warping, or any other abnormality.
• The battery may become hot during prolonged use. To avoid minor burns, do not
remove it immediately after using the camera.
• Remove the battery from the camera if it is not going to be used for a long time.
DANGER
(Do not put the AC adapter in water or use it when wet. Do not
touch or hold it with wet hands.
• Doing so may cause malfunction or electric shock.
(Do not use the AC adapter if it is covered with cloth such as a
blanket.
• Do not use the AC adapter if something is covering it (such as a blanket).
Heat may be kept, causing the AC adapter to deform. This may cause fire,
ignition or overheating.
(Do not disassemble or modify the AC adapter.
• This may cause electric shock or injury.
(Use an AC adapter designed to operate on the AC voltage in the
area where you are using the camera.
• Otherwise, fire, explosion, smoke, overheat, electric shock or burns may
result.
WARNING
(Do not damage the AC adapter’s cable.
• Do not pull on the AC adapter’s cable or add another cable to it. Be sure to
connect or disconnect the AC adapter’s cable while holding the power plug.
If the following cases occur, stop using and contact an Olympus dealer or
customer support center.
• The power plug or cable produces heat, burning smell, or smoke.
• The power plug or cable is cracked or broken. The contact is bad on the
power plug.
CAUTION
(Unplug the AC adapter’s cable from the outlet before cleaning
the camera.
• Otherwise, electric shock or injury may result.
AC adapter handling precautions
d4243_basic_e_00_bookfile_7.book Page 12 Thursday, January 27, 2005 3:37 PM

13
En
UNPACKING THE BOX CONTENTS
If you find any contents missing or damaged, please contact your retailer.
Digital Camera Strap Cradle (Docking Station)
Lithium Ion Battery (LI-40B) AC Adapter (A511) Power Cable
USB Cable AV Cable
OLYMPUS Master CD-ROM
Warranty Card Basic Manual
(this manual)
Advanced Manual
(CD-ROM)
Contents vary depending on the area where you purchased this camera.
d4243_basic_e_00_bookfile_7.book Page 13 Thursday, January 27, 2005 3:37 PM

UNPACKING THE BOX CONTENTS
14
En 1Attach the strap as shown.
Note
Be careful with the strap when you carry the camera, as it can easily catch on
stray objects, causing injury or damage.
Attach the strap correctly as shown above. Olympus is not responsible for any
damages resulting from the strap coming loose due to incorrect attachment.
Attaching the strap
Pull the strap tight so that it does not come loose.
d4243_basic_e_00_bookfile_7.book Page 14 Thursday, January 27, 2005 3:37 PM

15
En
LOADING THE BATTERY
1Make sure the camera is turned off.
2Open the battery compartment/card cover.
3Insert the battery.
The lens barrier is closed. The monitor is off.
The power lamp is off.
Slide
Lift
o
n
Battery lock knob
To remove the battery
Slide the battery lock knob in
the direction of the arrow to
release the battery. Turn the
camera upright, and let the
battery fall into your hand.
Battery lock knob
Slide the battery lock knob in the
direction of the arrow when
inserting the battery.
The battery is locked into place
when inserted correctly.
d4243_basic_e_00_bookfile_7.book Page 15 Thursday, January 27, 2005 3:37 PM

LOADING THE BATTERY
16
En 4Close the battery compartment/card cover.
Note
Power consumption by the camera varies depending on which functions are
used.
Power is consumed continuously during the conditions described below
causing the battery to become exhausted quickly.
The zoom is used repeatedly.
The shutter button is pressed halfway repeatedly in shooting mode,
activating the auto focus.
The fulltime AF is turned on.
A picture is displayed on the monitor for an extended period of time.
The camera is connected to a computer or printer.
Using an exhausted battery may cause the camera to turn off without
displaying the battery level warning.
Slide
Close
n
o
The battery
d4243_basic_e_00_bookfile_7.book Page 16 Thursday, January 27, 2005 3:37 PM

17
En
CHARGING THE BATTERY
The battery is not fully charged at the time of purchase. Set the camera
in the cradle and charge the battery before use.
1Connect the AC adapter to the cradle.
2Set the camera in the cradle.
TIPS
The battery usually takes approximately 2 hours to charge.
The power lamp blinks red slowly while charging. The lamp turns off when
charging is complete.
Note
This camera uses one Olympus LI-40B lithium ion battery. No other type of
battery can be used.
Do not use travel voltage converters as they could damage your AC adapter.
When carrying the camera set in the cradle, be careful not to drop the camera
or cradle.
DC-IN jack
Power cable
n
o
AC wall
outlet
AC adapter
Power lamp
d4243_basic_e_00_bookfile_7.book Page 17 Thursday, January 27, 2005 3:37 PM

18
En
TURNING THE CAMERA ON
1Set the mode switch to K, and press the POWER
switch.
Note
To save battery power, the camera automatically enters sleep mode and stops
operating after about 3 minutes of non-operation. The camera activates again
as soon as you operate the shutter button or zoom lever.
10 minutes after the camera enters sleep mode, the camera turns off. Turn the
camera on to use.
If the camera is continuously used for a long period of time, the internal
temperature of the camera may rise. In such cases, the power may
automatically turn off. Please wait before using again.
5M
5M
55
The power lamp on the camera
lights green.
The monitor turns on and the lens
barrier opens.
Set to K.
Shooting mode
Battery check indicator
POWER switch
Power lamp
Number of storable still pictures
d4243_basic_e_00_bookfile_7.book Page 18 Thursday, January 27, 2005 3:37 PM

TURNING THE CAMERA ON
19
En
Setting the date and time
The first time you use the camera, [Y/M/D]
is displayed prompting you to set the date
and time.
Setting the date and time makes your
pictures easier to manage, such as when
you view them with calendar display or
store them in the storage unit.
See “Setting the date and time” in Chapter
8 of the Advanced Manual. The camera can be operated without making
this setting.
Languages available on the camera
Available languages may vary according to
where you purchased the camera. The
instructions given in this manual and the
Advanced Manual apply to the camera
screens in English. See “Selecting a display
language” in Chapter 8 of the Advanced
Manual.
The battery check indicator is displayed on the monitor for 3 seconds
when the camera is turned on. The indicator changes as the remaining
battery power decreases.
When you first turn on the camera
Y/M/D
GOEXIT SELECT
PORTUGUES
ESPAÑOL
FRANCAIS
ENGLISH
Battery check indicator
Lit (green)
(Disappears after a while.)
Ready to shoot.
No power is left. Charge the
battery.
Blinking (red)
Only a little power is
remaining. The battery needs
charging soon.
ef
[BATTERY EMPTY]
is displayed.
d4243_basic_e_00_bookfile_7.book Page 19 Thursday, January 27, 2005 3:37 PM

20
En
TAKING A PICTURE
1Compose your picture.
2Focus on your subject.
5M
5M
55
AF target mark
Position the AF target mark on your
subject using the monitor.
Shutter button
Self-timer/
Card access lamp
5M
5M
55
#mark
Green lamp
The green lamp lights when the
focus and exposure are locked
(focus lock).
The #mark lights when the flash is
about to fire.
Press the shutter button halfway and
hold.
The AF target mark moves
to the focus position.
d4243_basic_e_00_bookfile_7.book Page 20 Thursday, January 27, 2005 3:37 PM