Om Xe 15 User guide

https://www.forkliftpdfmanuals.com/



https://www.forkliftpdfmanuals.com/

OM CARRELLI ELEVATORI S.p.A.OM CARRELLI ELEVATORI S.p.A.

Headquarters: Viale De Gasperi 7 20020 LainateHeadquarters: Viale De Gasperi 7 20020 Lainate (MI)(MI)

https://www.forkliftpdfmanuals.com/

0.20.2

Headquarters: Viale De Gasperi, 7 - 20020 Lainate Headquarters: Viale De Gasperi, 7 - 20020 Lainate (MI)(MI)

Plant: Via delle Ortensie, 33 - Z.I. - 70026 Modugno (BA)Plant: Via delle Ortensie, 33 - Z.I. - 70026 Modugno (BA)

Printed in ItalyPrinted in Italy

Publication 4016 804 2502 - 5^ Ediz.ne 05/2004Publication 4016 804 2502 - 5^ Ediz.ne 05/2004



https://www.forkliftpdfmanuals.com/

Thank you for choosing a forklift truckThank you for choosing a forklift truck

We have prepared this manual so that you can fully appreciate theWe have prepared this manual so that you can fully appreciate the

technical features and stylish design of your new truck.technical features and stylish design of your new truck.

The following pages contain instructions for The following pages contain instructions for using and maintaining theusing and maintaining the

truck properly, as well as recommendations and directions for operatingtruck properly, as well as recommendations and directions for operating

the truck efficiently and safely. We recthe truck efficiently and safely. We recommend that you read this manualommend that you read this manual

and the attachment “Safety instructions for industrial forklift trucks”.and the attachment “Safety instructions for industrial forklift trucks”.

SincerelySincerely

https://www.forkliftpdfmanuals.com/

0.30.3

OM Carrelli Elevatori S.p.A.OM Carrelli Elevatori S.p.A.



The OM company began manufacturing for

The OM company began manufacturing forklift trucks in 1951 klift trucks in 1951 in Milan. Tin Milan. Ten years later in en years later in 1961, the “Piccola1961, the “Piccola

Industria Meccanica sul PIndustria Meccanica sul Po” (PIMESPO) was established in Luzzara.o” (PIMESPO) was established in Luzzara.

CurrentlyCurrently, OM , OM PIMESPO operates from three locationsPIMESPO operates from three locations::

The corporate headquarters at Lainate The corporate headquarters at Lainate (MI), the Modugno (BA) plant, and the Luzzara (RE) plant.(MI), the Modugno (BA) plant, and the Luzzara (RE) plant.

https://www.forkliftpdfmanuals.com/

TToday, OM PIMESPO offers a complete range of forklift trucks and oday, OM PIMESPO offers a complete range of forklift trucks and indoor materials handlindoor materials handling systems. Custoing systems. Customersmers

can choose from the following list of can choose from the following list of products:products:

--DIEDIESELSEL, EL, ELECTECTRICRIC, A, AND LPND LPG FRG FRONT LONT LOOADIADING FONG FORKLRKLIFT IFT TRTRUCKS UCKS RANRANGINGING FRG FROM 0OM 0.8 T.8 TO 8 t.O 8 t.

--ELEELECTRCTRIC FIC FORKORKLIFLIFTS TS AND AND TRTRUCKS UCKS WITWITH TH TILLILLER ER STESTEERIERING ONG OR DR DRIVRIVER ER ON BON BOOARDARD

--ELELEVEVAATETED D OR OR GRGROUOUND ND ORORDEDER R PIPICKCKEERSRS

--THRTHREE-EE-SIDSIDED AED AND RND RETRETRACACTTABLABLE ELE ELECTECTRIC RIC FORFORKLIKLIFT FT TRTRUCKUCKS WS WITH ITH DRIDRIVER VER ON BOON BOARDARD

Modugno (BA) planModugno (BA) plantt

Luzzara (RE) plantLuzzara (RE) plant

https://www.forkliftpdfmanuals.com/

0.40.4

--TTRRAACCTTOORRS S 



CUSTOMER SERVICE DEPARTMENT / SUMMARY INFORMATIONCUSTOMER SERVICE DEPARTMENT / SUMMARY INFORMATION

••ContaContact yoct your locur local deal dealer aler for anfor any proy problemblems encs encounteountered wired with yoth your four forklifrklift trut truck or ck or sparespare

parts needs.parts needs.

••Use Use only only genuigenuine sne spare pare parts parts to reto repair pair your your trucktruck, thu, thus kes keepineping its g its techntechnical ical featufeaturesres

intact.intact.

https://www.forkliftpdfmanuals.com/

intact.intact.

••Refer Refer to thto the spe spare pare parts arts catacatalog, log, avaiavailabllable froe from yom your lour local cal dealedealer, for r, for orderiordering spng spareare

parts.parts.

••We rWe recommecommend tend that yhat you cou copy opy the tthe truck ruck inforinformatiomation in n in the the table table below below so tso that hat you you cancan

provide it to the dealer when necessary.provide it to the dealer when necessary.

Truck model Truck model ......................................................................................................................................................................................................................

Serial Serial N N ......................................................................................................................................................................................................................................

Delivery Delivery date date ....................................................................................................................................................................................................................

EC Conformity EC Conformity Mark n° Mark n° ..................................................................................................................................................................................

https://www.forkliftpdfmanuals.com/

0.50.5

https://www.forkliftpdfmanuals.com/



https://www.forkliftpdfmanuals.com/

TABLE OF CONTENTSTABLE OF CONTENTS

CHAPTER 1CHAPTER 1

Introduction – General instructionsIntroduction – General instructions

CHAPTER 2CHAPTER 2

SafetySafety

CHAPTER 3CHAPTER 3

https://www.forkliftpdfmanuals.com/

0.70.7

Technical data – Truck Technical data – Truck identificationidentification

CHAPTER 4CHAPTER 4

Truck informationTruck information

CHAPTER 5CHAPTER 5

Truck operationsTruck operations

CHAPTER 6CHAPTER 6

MaintenanceMaintenance

CHAPTER 7CHAPTER 7

Out of serviceOut of service

https://www.forkliftpdfmanuals.com/



https://www.forkliftpdfmanuals.com/

Introduction - General instructionsIntroduction - General instructions

INTRODUCTION - GENERAL INSTRUCTIONSINTRODUCTION - GENERAL INSTRUCTIONS

CONTENTSCONTENTS

1.1 - INTRODUCTION1.1 - INTRODUCTION.................................................................................................................................................. 22

1.1.a1.1.a - G- General eneral descriptiondescription ........................................................................................................................ 22

1.1.b1.1.b- Customer s- Customer service departmentervice department .......................................................................................... 22

1.1.c1.1.c- Spare parts- Spare parts.................................................................................................................................................... 22

1.1.d1.1.d- - Warranty Warranty cardcard .......................................................................................................................................... 33

1.1.e1.1.e- - How to How to use the use the manualmanual .............................................................................................................. 33

1 2 STANDARDS REFERENCES1 2 STANDARDS REFERENCES 44

ChapterChapter 11

https://www.forkliftpdfmanuals.com/

1.2 - STANDARDS REFERENCES1.2 - STANDARDS REFERENCES.......................................................................................................... 44

1.3 - POTENTIAL EXPLOSION AREAS1.3 - POTENTIAL EXPLOSION AREAS.......................................................................................... 44

1.4 - NORMAL USE AND 1.4 - NORMAL USE AND AREAS OF APPLICATIONAREAS OF APPLICATION..............................................44

1.5 - USAGE PROHIBITIONS1.5 - USAGE PROHIBITIONS.......................................................................................................................... 55

1.6 - TRUCK DESCRIPTION1.6 - TRUCK DESCRIPTION.............................................................................................................................. 66

1.6.a1.6.a- Fastenin- Fastening attachmentsg attachments ................................................................................................................ 66

1.6.b1.6.b- Modifying - Modifying the truckthe truck ............................................................................................................................ 66

1.7 - TRUCK DELIVERY1.7 - TRUCK DELIVERY.......................................................................................................................................... 77

https://www.forkliftpdfmanuals.com/