Omega Solid Birch Drawer User manual

DRAWER SIDES
• 5/8” Solid edge glued Birch construction
PART NUMBER HEIGHT LENGTH SHRINK PACK/QTY
D8000DNL2 2 1/2” ( 63.5 mm) 22” (558.8 mm) 20
D8005DNL2 3 1/2” ( 88.9 mm) 22” (558.8 mm) 20
D8010DNL2 4” (101.6 mm) 22” (558.8 mm) 20
D8020UNL2 6” (152.4 mm) 22” (558.8 mm) 20
D8025DNL2 8” (203.2 mm) 22” (558.8 mm) 10
D8035DNL2 10” (254.0 mm) 22” (558.8 mm) 10
D8030DNL2 10”NG* (254.0 mm) 22” (558.8 mm) 10
DRAWER FRONTS/BACKS
• 5/8” Solid fingerjointed Birch construction
D8040DNL2 2 1/2” ( 63.5 mm) 67” (1.7018 m) 5
D8045DNL2 3 1/2” ( 88.9 mm) 67” (1.7018 m) 5
D8050DNL2 4” (101.6 mm) 67” (1.7018 m) 5
D8060DNL2 6” (152.4 mm) 67” (1.7018 m) 5
D8065DNL2 8” (203.2 mm) 67” (1.7018 m) 3
D8075DNL2 10” (254.0 mm) 67” (1.7018 m) 3
D8070DNL2 10” NG* (254.0 mm) 67” (1.7018 m) 3
DRAWER BOTTOMS
• 5 mm Baltic Birch Plywood (B/BB grade)
D8017GNL2 21 7/8” (555.6 mm) 60” (1.524 m) 3
* No Groove, finished radius on top & bottom. Allows you to customize the height of the
parts needed.
1010 Rowe St., Elkhart, IN. 46516
Phone: [phone] Fax: [phone]
www.omegaindustries.com Form No. OME-980 Rev 012604
© 2004 Omega Industries, Inc.™
Drawer Part Specifications
Prefinished