Omega DP41-B Series User manual

DP41-B
4 Relay Output Option
Servicing North America:
USA: One Omega Drive, P.O. Box 4047
ISO 9001 Certified Stamford CT 06907-0047
T L: [phone] FAX: [phone]
e-mail: [email protected]
Canada: 976 Bergar
Laval (Quebec) H7L 5A1
T L: [phone] FAX: [phone]
e-mail: [email protected]
For immediate technical or application assistance:
USA and Canada: Sales Service: 1-800-826-6342 / 1-800-TC-OM GA®
Customer Service: 1-800-622-2378 / 1-800-622-B ST®
ngineering Service: 1-800-872-9436 / 1-800-USA-WH N®
T L X: 996404 ASYLINK: 62968934 CABL : OM GA
Mexico and T L: (001)800-TC-OM GA® FAX: [phone]
Latin American: n spañol: [phone]-7803
e-mail: [email protected]
Servicing Europe:
Benelux: Postbus 8034, 1180 LA Amstelveen, The Netherlands
T L: [phone] FAX: [phone]
Toll Free in Benelux: 0800 0993344
e-mail: [email protected]
Czech Republic: Rudé armády 1868, 733 01 Karviná 8
T L: [phone] FAX: [phone]
e-mail: [email protected]
France: 11, rue Jacques Cartier, 78280 Guyancourt
T L: [phone] FAX: [phone]
Toll Free in France: 0800 466 342
e-mail: [email protected]
ermany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn, Germany
T L: [phone] FAX: [phone]
Toll Free in Germany: 0800 639 7678
e-mail: [email protected]
United Kingdom: One Omega Drive
ISO 9002 Certified River Bend Technology Centre
Northbank, Irlam Manchester M44 5BD United Kingdom
T L: [phone] FAX: [phone]
Toll Free in ngland: 0800 488 488
e-mail: [email protected]
OME Anet® On-Line Service
www.omega.com
Internet e-mail
[email protected]
®
®
M2547/0802
WA ANTY/DISCLAIME
OM GA NGIN RING, INC. warrants this unit to be free of defects in
materials and workmanship for a period of one (1) year from the date of
purchase. In addition to OM GA’s standard warranty period, OM GA
ngineering will extend the warranty period for four (4) additional years if the
warranty card enclosed with each instrument is returned to OM GA.
If the unit malfunctions, it must be returned to the factory for evaluation. OM GA’s
Customer Service Department will issue an Authorized Return (AR) number
immediately upon phone or written request. Upon examination by OM GA, if the
unit is found to be defective, it will be repaired or replaced at no charge. OM GA’s
WARRANTY does not apply to defects resulting from any action of the
purchaser, including but not limited to mishandling, improper interfacing,
operation outside of design limits, improper repair, or unauthorized modification.
This WARRANTY is VOID if the unit shows evidence of having been tampered
with or shows evidence of having been damaged as a result of excessive
corrosion; or current, heat, moisture or vibration; improper specification;
misapplication; misuse or other operating conditions outside of OM GA’s control.
Components which wear are not warranted, including but not limited to contact
points, fuses, and triacs.
OME A is pleased to offer suggestions on the use of its various products.
However, OME A neither assumes responsibility for any omissions or
errors nor assumes liability for any damages that result from the use of its
products in accordance with information provided by OME A, either verbal
or written. OME A warrants only that the parts manufactured by it will be
as specified and free of defects. OME A MAKES NO OTHER WARRANTIES
OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESS OR
IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES
INCLUDIN ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF
LIABILITY: The remedies of purchaser set forth herein are exclusive, and
the total liability of OME A with respect to this order, whether based on
contract, warranty, negligence, indemnification, strict liability or otherwise,
shall not exceed the purchase price of the component upon which liability
is based. In no event shall OME A be liable for consequential, incidental or
special damages.
CONDITIONS: quipment sold by OM GA is not intended to be used, nor shall
it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in or with
any nuclear installation or activity; or (2) in medical applications or used on
humans. Should any Product(s) be used in or with any nuclear installation or
activity, medical application, used on humans, or misused in any way, OM GA
assumes no responsibility as set forth in our basic WARRANTY/DISCLAIM R
language, and, additionally, purchaser will indemnify OM GA and hold OM GA
harmless from any liability or damage whatsoever arising out of the use of the
Product(s) in such a manner.
ETU N EQUESTS / INQUI IES
Direct all warranty and repair requests/inquiries to the OM GA Customer Service
Department. B FOR R TURNING ANY PRODUCT(S) TO OM GA,
PURCHAS R MUST OBTAIN AN AUTHORIZ D R TURN (AR) NUMB R FROM
OM GA’S CUSTOM R S RVIC D PARTM NT (IN ORD R TO AVOID
PROC SSING D LAYS). The assigned AR number should then be marked on the
outside of the return package and on any correspondence.
The purchaser is responsible for shipping charges, freight, insurance and proper
packaging to prevent breakage in transit.
FOR WARRANTY R TURNS, please
have the following information available
B FOR
contacting OM GA:
1. P.O. number under which the
product was PURCHAS D,
2. Model and serial number of the
product under warranty, and
3. Repair instructions and/or specific
problems relative to the product.
FOR NON-WARRANTY R PAIRS,
consult OM GA for current repair
charges. Have the following information
available B FOR contacting OM GA:
1. P.O. number to cover the COST of
the repair,
2. Model and serial number of product,
and
3. Repair instructions and/or specific
problems relative to the product.
OM GA’s policy is to make running changes, not model changes, whenever an
improvement is possible. This affords our customers the latest in technology and
engineering.
OM GA is a registered trademark of OM GA NGIN RING, INC.
© Copyright 2002 OM GA NGIN RING, INC. All rights reserved. This
document may not be copied, photocopied, reproduced, translated, or reduced to
any electronic medium or machine-readable form, in whole or in part, without
prior written consent of OM GA NGIN RING, INC.
PATENT AND TRADEMARK NOTICE: This product is covered by one or more
of the following patents: U.S. Pat. No. Des. 336,895; 5,274,577; 6,243,021 /
CANADA 2052599; 2052600 / ITALY 1249456; 1250938 / G RMANY D 41
34398 C2 / SPAIN 2039150; 2048066 / UK Patent No. GB2 249 837; GB2 248
954 / FRANC BR V T NO. 91 12756. The “Meter Bezel Design” is a trademark
of Newport lectronics, Inc. US D UND R LIC NS . Other U.S. and
International Patents pending or applied for.
USASA
MADE
IN
It is the policy of OM GA to comply with all worldwide safety and MC/ MI regulations
that apply. OM GA is constantly pursuing certification of its products to the uropean
New Approach Directives. OM GA will add the C mark to every appropriate device
upon certification.
This device is marked with the international hazard symbol. It is important to
read the Setup Guide before installing or commissioning this device as it con-
tains important information relating to safety and MC.
WARNIN : These products are not designed for use in, and should not be used
for, patient connected applications.
The information contained in this document is believed to be correct but OM GA
ngineering, Inc. accepts no liability for any errors it contains, and reserves the right to
alter specifications without notice.
, omega.com ®are trademarks of OM GA ngineering, Inc.
®
OPE ATION MANUAL
Output Specifications:
Relay Output: Form -C, SPDT Relays
Power Rating for
Resistive Loads: Two relays at P6 and P7
250 Vac or 30 Vdc @ 5 A
Two relays at P18
250 Vac or 30 Vdc @ 3 A
Isolation: Power to Input/Relay Outputs:
2500 Vac per 1 min. test
Relays to Inputs / Analog,
Comm, & thernet Outputs:
2500 Vac per 1 min. test
4
RoHS 2 Compliant

FEATURES OVERVIEW:
The 4 Relay Output Board provides four isolated
Form-C electro-mechanical relays that enable
setpoint-triggered switching to an external device.
ach relay can accommodate a single setpoint.
200 W, 2500pf snubbers are provided for each
normally open contact.
BOARD INSTALLATION:
To install optional Relay Output printed circuit board:
1. Refer to “Reveal the Main Board” in Main Operator’s
Manual Section 5.2, Disassembly.
2. Using figure below as a reference, insert relay option
board(s) into J10 connector on the main board.
WARNIN : To avoid electrical shock be sure
to disconnect the unit from its power supply.
After you have opened the meter you are
ready to install option card.
To install:
1. Hold relay board with components facing the main
board.
2. Position the P10 connector to mate with the J10
connector on the main board (at rear of unit).
3.
Push the board downward, guiding relay board
edges through the rear panel guides until it rests on
the upper rear panel and the main board.
Figure 1 Option Board Installation
4 R LAY OUTPUT BD
SIGNAL INPUT BD
AC POW R BD
P10
J10
Start Here
JUMPER CONFI URATION:
The figure below shows the locations of the 4 Relay
Output Board jumpers S1 and S2, the P10 socket
connecting the board to the Main Board, and the
output plugs P6, P7, P18A and P18B.
Press This Button
Figure 2 4 elay Board Jumpers and Plugs
The table below shows which jumpers are assigned
to each relay. Defaults have asterisks.
re 4 elay Output Board Wiring Connections
Table 1 4 elay Board Jumpers
S1 S2 FUNCTION
Assigns SP1 to Relay 1 (P6)
A, C* A, C* Assigns SP2 to Relay 2 (P7)
Assigns SP3 to Relay 3 (P18A)
Assigns SP4 to Relay 4 (P18B)
Assigns SP1 to Relay 3 (P18A)
B, D A, C Assigns SP2 to Relay 2 (P7)
Assigns SP3 to Relay 1 ( P6)
Assigns SP4 to Relay 4 (P18B)
Assigns SP1 to Relay 3 (P18A)
B, D B, D Assigns SP2 to Relay 4 (P18B)
Assigns SP3 to Relay 1 ( P6)
Assigns SP4 to Relay 2 ( P7)
Assigns SP1 to Relay 1 (P6)
A, C B, D Assigns SP2 to Relay 4 (P18B)
Assigns SP3 to Relay 3 (P18A)
Assigns SP4 to Relay 2 (P7)
A
B
C
D
S1
S2
BD
A
C
S1
S2
P18B
P18A
P7
P6
P10
2
WIRIN CONNECTIONS:
WARNIN : Do not connect ac power
meter until you have completed all input
and output connections. Failure to do so
may result in injury! This device must only
be installed electrically by a specially
trained electrician with corresponding
qualifications.
Press This Button
Figure 3 4 elay Output Board Wiring Connections
Table 2 Pin Assignments for the P6, P7 and P18
CONNECTOR PIN FUNCTION
P6 1 NO1 (Normally Open)
(Relay 1 Connection) 2 Common 1
3 NC1 (Normally Closed)
P7 1 NO2 (Normally Open)
(Relay 2 Connection) 2 Common 2
3 NC2 (Normally Closed)
P18A 1 NO3 (Normally Open)
(Relay 3 Connection) 2 Common 3
3 NC3 (Normally Closed)
P18B 1 NO4 (Normally Open)
(Relay 4 Connection) 2 Common 4
3 NC4 (Normally Closed)
123
12
P18A
P18B
3
}
}
Relay 3 Relay 4
N.O.3 COM3 N.C.3
N.O.4 COM4 N.C.4
EXTERNAL LOAD
N
L
FUSE
N.O.4
COM4
123
12
P6
P7
3
}
}
Relay 1 Relay 2
N.O.1 COM1 N.C.1
N.O.2 COM2 N.C.2
3